Hi,
I am trying to capture the status of jobs and their exit code into a Table.
I'm saving the log in a folder using proc printto and then reading the log into a dataset for finding required values.
I'm using sas program step in my SAS Studio Flows for execution.
When there is no error in the flow, my code executes successfully and I'm able to capture the details.
However, when I add an error in the flow, to test whether the details are being captured or not, I get errors.
Logfile is not being read by the program and no value for ERROR_CODE and ERROR are being saved.
How can I ensure that the logfile is read? I added a delay of 15sec and 60sec but its still unable to read log.
Code:
data _null_;
call sleep(60,1);
run;
options symbolgen mprint mlogic;
%macro m_upd_job_status(m_full_name=, m_job_name=,m_startdt=,m_end_dt=);
FILENAME REFFILE FILESRVC FOLDERPATH='/Project/Test/LOGS' FILENAME="&m_full_name..txt";
%let Job_status=Completed;
%let ERROR_CODE= ;
%let ERROR_DESC= ;
data test;
infile REFFILE truncover;
input log_line $400.;
I=index((log_line), 'SYSCC=');
run;
data _null_;
infile REFFILE truncover;
input log_line $400.;
if index((log_line), 'SYSCC=') =1 then call symputx('ERROR_CODE', STRIP(SUBSTR(log_line,8)));
if index((log_line), 'ERROR ') > 0 or index((log_line), 'ERROR:') > 0 then call symputx('ERROR_DESC', STRIP(log_line));
run;
%if %sysevalf(%superq(ERROR_CODE) > 0) %then %do;
%let Job_status = Failed;
%end;
%put &ERROR_CODE.;
%put &ERROR_DESC.;
%put &Job_status.;
proc sql;
update LIB.AUDIT_TBL SET STATUS="&Job_status."
where JOB_NAME = "&jobnm.";
update LIB.AUDIT_TBL SET EXIT_CODE=&ERROR_CODE.
where JOB_NAME = "&jobnm.";
update LIB.AUDIT_TBL SET START_DTTM="&logdt."dt
where JOB_NAME = "&jobnm.";
update LIB.AUDIT_TBL SET END_DTTM="&endt."dt
where JOB_NAME = "&jobnm.";
quit;
%mend m_upd_job_status;
%m_upd_job_status(m_full_name=&full_job. ,m_job_name=&jobnm.,m_startdt=&logdt.,m_end_dt=&endt.);
Log:
2032 data _null_;
2033 call sleep(60,1);
2034 run;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
2035 options symbolgen mprint mlogic;
2036
2037 %macro m_upd_job_status(m_full_name=, m_job_name=,m_startdt=,m_end_dt=);
2038 FILENAME REFFILE FILESRVC FOLDERPATH='/Project/Test/LOGS' FILENAME="&m_full_name..txt";
2039
2040 %let Job_status=Completed;
2041 %let ERROR_CODE= ;
2042 %let ERROR_DESC= ;
2043
2044 data test;
2045 infile REFFILE truncover;
2046 input log_line $400.;
2047 I=index((log_line), 'SYSCC=');
2048 run;
2049
2050 data _null_;
2051 infile REFFILE truncover;
2052 input log_line $400.;
2053 if index((log_line), 'SYSCC=') =1 then call symputx('ERROR_CODE', STRIP(SUBSTR(log_line,8)));
2054 if index((log_line), 'ERROR ') > 0 or index((log_line), 'ERROR:') > 0 then call symputx('ERROR_DESC', STRIP(log_line));
2055 run;
2056
2057 %if %sysevalf(%superq(ERROR_CODE) > 0) %then %do;
2058 %let Job_status = Failed;
2059 %end;
2060
2061 %put &ERROR_CODE.;
2062 %put &ERROR_DESC.;
2063 %put &Job_status.;
2064
2065 proc sql;
2066 update LIB.AUDIT_TBL SET STATUS="&Job_status."
2067 where JOB_NAME = "&jobnm.";
2068 update LIB.AUDIT_TBL SET EXIT_CODE=&ERROR_CODE.
2069 where JOB_NAME = "&jobnm.";
2070 update LIB.AUDIT_TBL SET START_DTTM="&logdt."dt
2071 where JOB_NAME = "&jobnm.";
2072 update LIB.AUDIT_TBL SET END_DTTM="&endt."dt
2073 where JOB_NAME = "&jobnm.";
2074 quit;
2075 %mend m_upd_job_status;
2076
2077 %m_upd_job_status(m_full_name=&full_job. ,m_job_name=&jobnm.,m_startdt=&logdt.,m_end_dt=&endt.);
MLOGIC(M_UPD_JOB_STATUS): Beginning execution.
SYMBOLGEN: Macro variable FULL_JOB resolves to 027_JOB1_02MAY2025:19:18:54
SYMBOLGEN: Macro variable JOBNM resolves to 027_JOB1
SYMBOLGEN: Macro variable LOGDT resolves to 02MAY2025:19:18:54
SYMBOLGEN: Macro variable ENDT resolves to 02MAY2025:19:18:55
MLOGIC(M_UPD_JOB_STATUS): Parameter M_FULL_NAME has value 027_JOB1_02MAY2025:19:18:54
MLOGIC(M_UPD_JOB_STATUS): Parameter M_JOB_NAME has value 027_JOB1
MLOGIC(M_UPD_JOB_STATUS): Parameter M_STARTDT has value 02MAY2025:19:18:54
MLOGIC(M_UPD_JOB_STATUS): Parameter M_END_DT has value 02MAY2025:19:18:55
SYMBOLGEN: Macro variable M_FULL_NAME resolves to 027_JOB1_02MAY2025:19:18:54
MPRINT(M_UPD_JOB_STATUS): FILENAME REFFILE FILESRVC FOLDERPATH='/Project/Test/LOGS'
FILENAME="027_JOB1_02MAY2025:19:18:54.txt";
MLOGIC(M_UPD_JOB_STATUS): %LET (variable name is JOB_STATUS)
MLOGIC(M_UPD_JOB_STATUS): %LET (variable name is ERROR_CODE)
MLOGIC(M_UPD_JOB_STATUS): %LET (variable name is ERROR_DESC)
MPRINT(M_UPD_JOB_STATUS): data test;
MPRINT(M_UPD_JOB_STATUS): infile REFFILE truncover;
MPRINT(M_UPD_JOB_STATUS): input log_line $400.;
MPRINT(M_UPD_JOB_STATUS): I=index((log_line), 'SYSCC=');
MPRINT(M_UPD_JOB_STATUS): run;
NOTE: The data set WORK.TEST has 0 observations and 2 variables.
WARNING: Data set WORK.TEST was not replaced because this step was stopped.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
MPRINT(M_UPD_JOB_STATUS): data _null_;
MPRINT(M_UPD_JOB_STATUS): infile REFFILE truncover;
MPRINT(M_UPD_JOB_STATUS): input log_line $400.;
MPRINT(M_UPD_JOB_STATUS): if index((log_line), 'SYSCC=') =1 then call symputx('ERROR_CODE', STRIP(SUBSTR(log_line,8)));
MPRINT(M_UPD_JOB_STATUS): if index((log_line), 'ERROR ') > 0 or index((log_line), 'ERROR:') > 0 then call symputx('ERROR_DESC',
STRIP(log_line));
MPRINT(M_UPD_JOB_STATUS): run;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
MLOGIC(M_UPD_JOB_STATUS): %IF condition %sysevalf(%superq(ERROR_CODE) > 0) is FALSE
MLOGIC(M_UPD_JOB_STATUS): %PUT &ERROR_CODE.
SYMBOLGEN: Macro variable ERROR_CODE resolves to
MLOGIC(M_UPD_JOB_STATUS): %PUT &ERROR_DESC.
SYMBOLGEN: Macro variable ERROR_DESC resolves to
MLOGIC(M_UPD_JOB_STATUS): %PUT &Job_status.
SYMBOLGEN: Macro variable JOB_STATUS resolves to Completed
Completed
MPRINT(M_UPD_JOB_STATUS): proc sql;
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
SYMBOLGEN: Macro variable JOB_STATUS resolves to Completed
SYMBOLGEN: Macro variable JOBNM resolves to 027_JOB1
MPRINT(M_UPD_JOB_STATUS): update LIB.AUDIT_TBL SET STATUS="Completed" where JOB_NAME = "027_JOB1";
ORACLE_379: Prepared: on connection 4
SELECT * FROM LIB.AUDIT_TBL
ORACLE_380: Prepared: on connection 4
update LIB.AUDIT_TBL set LIB.AUDIT_TBL."STATUS" = 'Completed' where LIB.AUDIT_TBL."JOB_NAME" =
'027_JOB1'
NOTE: Statement not executed due to NOEXEC option.
SYMBOLGEN: Macro variable ERROR_CODE resolves to
SYMBOLGEN: Macro variable JOBNM resolves to 027_JOB1
NOTE 137-205: Line generated by the invoked macro "M_UPD_JOB_STATUS".
2077 proc sql; update LIB.AUDIT_TBL SET STATUS="&Job_status." where JOB_NAME = "&jobnm."; update
2077 ! LIB.AUDIT_TBL SET EXIT_CODE=&ERROR_CODE. where JOB_NAME = "&jobnm."; update LIB.AUDIT_TBL SET
--------
22
ERROR 22-322: Syntax error, expecting one of the following: (, ',', WHERE.
MPRINT(M_UPD_JOB_STATUS): update LIB.AUDIT_TBL SET EXIT_CODE= where JOB_NAME = "027_JOB1" ;
SYMBOLGEN: Macro variable LOGDT resolves to 02MAY2025:19:18:54
SYMBOLGEN: Macro variable JOBNM resolves to 027_JOB1
MPRINT(M_UPD_JOB_STATUS): update LIB.AUDIT_TBL SET START_DTTM="02MAY2025:19:18:54"dt where JOB_NAME =
"027_JOB1";
ORACLE_381: Prepared: on connection 4
SELECT * FROM LIB.AUDIT_TBL
ORACLE_382: Prepared: on connection 4
update LIB.AUDIT_TBL set LIB.AUDIT_TBL."START_DTTM" = TO_DATE('
02MAY2025:19:18:54','DDMONYYYY:HH24:MI:SS','NLS_DATE_LANGUAGE=American') where LIB.AUDIT_TBL."JOB_NAME" =
'027_JOB1'
NOTE: Statement not executed due to NOEXEC option.
SYMBOLGEN: Macro variable ENDT resolves to 02MAY2025:19:18:55
SYMBOLGEN: Macro variable JOBNM resolves to 027_JOB1
MPRINT(M_UPD_JOB_STATUS): update LIB.AUDIT_TBL SET END_DTTM="02MAY2025:19:18:55"dt where JOB_NAME =
"027_JOB1";
ORACLE_383: Prepared: on connection 4
SELECT * FROM LIB.AUDIT_TBL
ORACLE_384: Prepared: on connection 4
update LIB.AUDIT_TBL set LIB.AUDIT_TBL."END_DTTM" = TO_DATE('
02MAY2025:19:18:55','DDMONYYYY:HH24:MI:SS','NLS_DATE_LANGUAGE=American') where LIB.AUDIT_TBL."JOB_NAME" =
'027_JOB1'
NOTE: Statement not executed due to NOEXEC option.
MPRINT(M_UPD_JOB_STATUS): quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.01 seconds
cpu time 0.00 seconds
MLOGIC(M_UPD_JOB_STATUS): Ending execution.
... View more
