Hi, I am no longer able to use the old "angle" command that I used to use in an axis statement in gplot. sgplot requires annotation to be able to angle our tick marks on the xaxis. I found some code on the SAS site but it doesn't seem to work with dates. Has anyone ever applied annotation in sgplot to angle date format tick marks upward about 45 degrees read from left to right? If so, can you share your code, please. I have tried a variety of options in proc template and a few in sgplot to no avail.
Had another go using annotate, have a look before. Had to use RANGES to get the desired thickmarks. Give it a try.
data ts;
do year = 2005 to 2015;
do month = 1 to 12 by 2;
myDate = mdy(month, 1, year);
value = ceil(ranuni(123) * 5);
y0=0;
if month = 1 then do;
myDate_c = put(myDate, monyy.);
end;
else do;
call missing(myDate_c);
end;
if myDate > "01aug2015"d then do;
leave;
end;
row + 1;
output;
end;
end;
format
myDate date9.
value nlnum12.
;
run;
%SGANNO
data ts_anno;
set ts(keep=myDate myDate_c );
where myDate_c not is missing;
%SGTEXT(
LABEL=myDate_c
, ANCHOR= "bottom"
, TEXTCOLOR="red"
, X1SPACE="datavalue"
, X1=myDate
, y1space="WALLPERCENT"
, y1=-8
, LAYER="front"
, rotate=45
)
run;
proc sgplot data=ts pad=(bottom=10pct) sganno=ts_anno;
series x=myDate y=value;
xaxis type=time
ranges=(
"01JAN2005"d - "01jul2015"d
)
display=(novalues nolabel)
grid
;
yaxis
min=0 max=5
grid
;
run;
Have a look through this blog:
http://blogs.sas.com/content/graphicallyspeaking/
It has examples of every possible graphing technique you can imagine. Try searching for annotate.
This is a good article. Unfortunately, it still does not address my question. I am able to format the tick mark date values in the same ways suggested by the author. Unfortunately, I work at a place that wishes me to format them angled diagonally read from right to left like so: / / / /.. None of the functions presented here can accomplish this nor can they be adapted to do this as far as I know. Any other suggestions would be greatly appreciated.
CAn you perhaps provide an example picture of what you would want it to look like, I don't get it from a string of slashes.
Sure, I'll attach the graph. These things have been done in excel for years, and while I can do the same thing with SAS, it doesn't turn out exactly like this graph on the xaxis. With GPLOT it used to be easy because I would add a statement such as: axis1 value= (h=1 angle= 45) label=(angle=0 " ") order=("01JAN05"d to "01AUG15"d by year); and it would automatically give me what I needed. Unfortunately, GPLOT leaves a lot of white space if the series finishes at any month other the January. SGPLOT and Proc Template are able to solve this problem, but unfortunately neither of them accept the angle command. There's a variety of rotate options for the tick values but they only go vertical or diagonal going down read from right to left. Check out the attachment.
Yes, I see. As far as I can tell there isn't a way to have the ticks go left to right up at 45 degree's, only down 45 degrees:
specifies how the tick values are rotated on the X and X2 axes.
DIAGONAL | rotates the tick values to a 45-degree diagonal position. The X labels read left to right in a downward direction. The X2 labels read left to right in an upward direction. |
VERTICAL | rotates the labels to a 90-degree vertical position. The labels are always drawn from bottom to top. |
Default | DIAGONAL |
Restriction | This option is valid for XAXISOPTS= and X2AXISOPTS= only. |
Interaction |
The TICKVALUEFITPOLICY= option must be set to ROTATE or ROTATEALWAYS for this option to have any effect. |
There's an idea for it:
Unless anyone else has any information?
I assume you are somewhere in Europe, Since we label tick marks like this / /, but SGPLOT would do it like this \ \.
Have a look at the sample code below. There is a simple version using the TEXT plot statement to label and another version using GTL where we have more control.
data ts;
do year = 2015;
do month = 1 to 12;
myDate = mdy(month, 1, year);
value = ceil(ranuni(123) * 5);
y0=-0.5;
myDate_c = put(myDate, ddmmyyp10.);
output;
end;
end;
format
myDate date9.
value nlnum12.
;
run;
proc sgplot data=ts;
series x=myDate y=value;
text x=mydate y=y0 text=myDate_c /
rotate=45
;
xaxis display=(NOLINE NOVALUES) ;
refline 0;
run;
ods path
(prepend) work.mytemplates (update)
;
proc template;
define statgraph sgdesign;
dynamic _MYDATE _VALUE _Y0A;
begingraph;
entrytitle halign=center 'Some title';
entryfootnote halign=left 'some footnote';
layout lattice /
rows=2
rowgutter=0
rowweights=(0.88 0.12)
;
layout overlay /
xaxisopts=( display=(ticks))
yaxisopts=(
display=(ticks tickvalues label)
linearopts=( viewmin=0 viewmax=5 )
)
;
seriesplot x=_MYDATE y=_VALUE /
name='series' connectorder=xaxis
;
endlayout;
layout overlay / walldisplay=none
yaxisopts=( display=none)
xaxisopts=( display=none)
;
textplot x=_MYDATE y=_Y0A text=myDate_c / rotate=45;
endlayout;
endlayout;
endgraph;
end;
run;
proc sgrender data=WORK.TS template=sgdesign;
dynamic _MYDATE="MYDATE" _VALUE="VALUE" _Y0A="Y0";
run;
Bruno
Thanks, Bruno. This seems to be closest to what I need. What is your suggestion if I want to display my entire series say from January 2005 until August 2015, but I only want to display January Tick Values of each year? Right now I'm trying to do it without the date facing the proper way using:
xaxisopts=(label=" " offsetmax=0 type=time timeopts=(tickvaluelist=("01JAN05"d "01JAN06"d "01JAN07"d "01JAN08"d
"01JAN09"d "01JAN10"d "01JAN11"d "01JAN12"d "01JAN13"d "01JAN14"d "01JAN15"d) viewmin="01JAN05"d max="01AUG15"d));
yaxisopts=(label=" " type=linear linearopts=(tickvaluelist=(0 1000 2000 3000 4000 5000 6000) viewmin=0 viewmax=6000));
seriesplot x='date'n y='jo_sa'n / primary=true lineattrs=( color=blue pattern=solid thickness=1.5);
Is there somthing I can do in GTL that is the equivalent of the following in sgplot, for some reason I didn't have to specify an interval when I used "ranges", it just did January automatically and included the entire series up to August 2015:
xaxis label=' ' ranges=("01JAN05"d - "01AUG15"d) tickvalueformat=monyy. ;
Basically, how can I adapt your gtl code to include just the tick marks and diagonally upward formatted labels for January of each year from 2005 until now. I don't want it to cut off the series in January of this year, but I also wouldn't want to include January 16 as a tick mark (this leaves a lot of white space on the graph).
Jibra
find below a changed example. The labeling of the X-axis is done with the TEXT / TEXTPLOT statement, so you can control the value of the variable that is used with the TEXT / TEXTPLOT to only label the points you want. The tickmarks from the SERIESPLOT are done automatically, and for this example they seem to fit, with what you need.
According to the doc RANGES is used for broken axis
data ts;
do year = 2005 to 2015;
do month = 1, 4, 7, 10;
myDate = mdy(month, 1, year);
value = ceil(ranuni(123) * 5);
y0=-0.5;
if month = 1 then do;
myDate_c = put(myDate, monyy.);
end;
else do;
call missing(myDate_c);
end;
if myDate > "01jan2015"d then do;
leave;
end;
output;
end;
end;
format
myDate date9.
value nlnum12.
;
run;
proc sgplot data=ts;
series x=myDate y=value;
text x=mydate y=y0 text=myDate_c /
rotate=45
;
xaxis display=(NOLINE NOVALUES) ;
refline 0;
run;
ods path
(prepend) work.mytemplates (update)
;
proc template;
define statgraph sgdesign;
dynamic _MYDATE _VALUE _Y0A;
begingraph;
entrytitle halign=center 'Some title';
entryfootnote halign=left 'some footnote';
layout lattice /
rows=2
rowgutter=0
rowweights=(0.88 0.12)
;
layout overlay /
xaxisopts=( griddisplay=on display=(ticks))
yaxisopts=(
display=(ticks tickvalues label )
linearopts=( viewmin=0 viewmax=5 )
)
;
seriesplot x=_MYDATE y=_VALUE /
name='series' connectorder=xaxis
;
endlayout;
layout overlay / walldisplay=none
yaxisopts=( display=none)
xaxisopts=( display=none)
;
textplot x=_MYDATE y=_Y0A text=myDate_c / rotate=45;
endlayout;
endlayout;
endgraph;
end;
run;
proc sgrender data=WORK.TS template=sgdesign;
dynamic _MYDATE="MYDATE" _VALUE="VALUE" _Y0A="Y0";
run;
Bruno
Thank you Bruno. Your code works perfectly to make the tick mark values diagonal in gtl. Unfortunately, I am back where I was with simple gplot. I want the series to graph line to begin immediately on the y axis and end at the edge fo the chart. I had been able to angle my tickmarks with gplot before but when the time series input extended past January 15 to August data, I was left with a chunk of white space and an undesired January 16 tick marks. There was always a bit of white after the end of the series. That's why I started to look at other options and encountered all the angle issues with sgplot and proc template. In adapting your code, i encountered white space on both sides (see attached). I tried to counter that with the offset to 0 and linearopts to 0 functions, and I ended up with the same white space on the right side of the graph and losing a portion of my first tick value label. Is there an easy way to adjust your code to mimic the graph I attached yesterday? This code has been a great education.
At the moment I can not help much more. ODS Graphics also supports annotate, I can imagine, that we can do something like this with annotate, and maybe go away from the axis type time. to get exactly what you need.
Bruno
Had another go using annotate, have a look before. Had to use RANGES to get the desired thickmarks. Give it a try.
data ts;
do year = 2005 to 2015;
do month = 1 to 12 by 2;
myDate = mdy(month, 1, year);
value = ceil(ranuni(123) * 5);
y0=0;
if month = 1 then do;
myDate_c = put(myDate, monyy.);
end;
else do;
call missing(myDate_c);
end;
if myDate > "01aug2015"d then do;
leave;
end;
row + 1;
output;
end;
end;
format
myDate date9.
value nlnum12.
;
run;
%SGANNO
data ts_anno;
set ts(keep=myDate myDate_c );
where myDate_c not is missing;
%SGTEXT(
LABEL=myDate_c
, ANCHOR= "bottom"
, TEXTCOLOR="red"
, X1SPACE="datavalue"
, X1=myDate
, y1space="WALLPERCENT"
, y1=-8
, LAYER="front"
, rotate=45
)
run;
proc sgplot data=ts pad=(bottom=10pct) sganno=ts_anno;
series x=myDate y=value;
xaxis type=time
ranges=(
"01JAN2005"d - "01jul2015"d
)
display=(novalues nolabel)
grid
;
yaxis
min=0 max=5
grid
;
run;
Bruno-your last code is perfect for what I want; when I run it on its own it gives me exactly what I want. After I adapted it with my own using my own table as data source and my own date format, I lost all the tick marks except for two (see image). Where did I go wrong? Nevertheless, this is he absolute best code for angling tickmarks in any of the plotting sas functions. Thank you!!!!
proc sql noprint; create table CP_JO as SELECT round((a.value/b.jo_sa), 0.1) as jopu, a.year, a.month, MDY(b.month, 01, b.year) as sasdate, 6000 as x1, MDY(b.month, 01, b.year) format=daslt. as date FROM cps a, jlt2 b where a.month=b.month and a.year=b.year order by year, month; quit; data bruno; set cp_jo; do year = 2005 to 2015; do month = 1 to 12 by 2; sasdate = mdy(month, 1, year); y0=0; if month = 1 then do; myDate_c = put(sasdate, daslt.); end; else do; call missing(myDate_c); end; if myDate > "01aug2015"d then do; leave; end; row + 1; output; end; end; format sasdate date9. jopu nlnum12. ; keep year month sasdate jopu y0 x1 mydate_c row; run; %SGANNO data jp_anno; set bruno(keep=sasdate myDate_c ); where myDate_c not is missing; %SGTEXT( LABEL=myDate_c , ANCHOR= "bottom" , TEXTCOLOR="black" , X1SPACE="datavalue" , X1=sasdate , y1space="WALLPERCENT" , y1=-8 , LAYER="front" , rotate=45 ) run; proc sgplot data=cp_jo pad=(bottom=10pct) sganno=jp_anno noautolegend; band y=x1 lower="01DEC07"d upper="01JUN09"d / transparency=.8 fillattrs=(color=gray); series x=sasdate y=jopu; xaxis type=time ranges=( "01JAN2005"d - "01aug2015"d ) display=(novalues nolabel ) ; yaxis grid ; YAXIS LABEL = ' ' GRID VALUES = (0 TO 7 BY 1); run;
What is the time Interval of your data? Is it monthly data? Are some months missing?
Basically, I have data that is in a monthly interval. However, I need my graph to display the rate associated with the y axis in yearly intervals. Proc GPLOT and Proc Template were either cutting off the series line at either Jan15 or adding a bunch of white space and another tick mark for January 16. Your code, which I designated as the solution was adaptable to get as close as possible to what I need. In my first proc sql statement, I already had my months in numeric formats and I kept them all, but I did my other date formats here, and added the columns I need for annotations. In your data step, I pulled everything I need from the table I created in sql, did my conversion of the January sasdates to my own format, made sure all other months were missing--not sure why we are adding a row number, but I kept that. Next I did the annotation exactly as you coded. Then the Plot gave me almost exactly what I wanted. I hate to be greedy, but what are the functions in sgplot that would let us move the tickmarks into the graph? GTL has tickstyle=inside, but I couldn't find an equivalent for sgplot. Also, is there a way to change the colors of the grid lines? Thank you very much for all your assistance.
My final code:
proc sql noprint;
create table CP_JO as
SELECT
round((a.value/b.jo_sa), 0.1) as jopu,
b.year
b.month,
MDY(b.month, 01, b.year) format=date9. as sasdate,
6000 as r1,
0 as y,
MDY(b.month, 01, b.year) format=daslt. as date
FROM
cps a, jlt2 b
where a.month=b.month and a.year=b.year
order by year, month;
quit;
data bruno;
set cp_jo;
if year>2004;
if month = 1 then do;
myDate_c = put(sasdate, daslt.);
end;
else do;
call missing(myDate_c);
end;
row + 1;
output;
;
keep year month sasdate jopu y0 r1 mydate_c row;
run;
%SGANNO
data jp_anno;
set bruno(keep=sasdate myDate_c );
where myDate_c not is missing;
%SGTEXT(
LABEL=myDate_c
, ANCHOR= "bottom"
, TEXTCOLOR="black"
, X1SPACE="datavalue"
, X1=sasdate
, y1space="WALLPERCENT"
, y1=-8
, LAYER="front"
, rotate=45
)
run;
proc sgplot data=cp_jo pad=(bottom=10pct) sganno=jp_anno noautolegend;
band y=r1 lower="01DEC07"d upper="01JUN09"d / transparency=.8 fillattrs=(color=gray);
series x=sasdate y=jopu;
xaxis type=time
ranges=(
"01JAN2005"d - "01aug2015"d
)
display=(novalues nolabel )
;
yaxis
grid
;
YAXIS LABEL = ' ' GRID VALUES = (0 TO 7 BY 1);
run;
Here's an abbreviated section of the bruno table from the data step above:
jopu | year | month | sasdate | r1 | myDate_c | row |
2.2 | 2005 | 1 | 1-Jan-2005 | 6000 | Jan-05 | 1 |
2.1 | 2005 | 2 | 1-Feb-2005 | 6000 | 2 | |
2 | 2005 | 3 | 1-Mar-2005 | 6000 | 3 | |
1.9 | 2005 | 4 | 1-Apr-2005 | 6000 | 4 | |
2 | 2005 | 5 | 1-May-2005 | 6000 | 5 | |
1.9 | 2005 | 6 | 1-Jun-2005 | 6000 | 6 | |
1.8 | 2005 | 7 | 1-Jul-2005 | 6000 | 7 | |
1.8 | 2005 | 8 | 1-Aug-2005 | 6000 | 8 | |
1.8 | 2005 | 9 | 1-Sep-2005 | 6000 | 9 | |
1.8 | 2005 | 10 | 1-Oct-2005 | 6000 | 10 | |
1.7 | 2005 | 11 | 1-Nov-2005 | 6000 | 11 | |
1.7 | 2005 | 12 | 1-Dec-2005 | 6000 | 12 | |
1.7 | 2006 | 1 | 1-Jan-2006 | 6000 | Jan-06 | 13 |
1.7 | 2006 | 2 | 1-Feb-2006 | 6000 | 14 | |
1.6 | 2006 | 3 | 1-Mar-2006 | 6000 | 15 | |
1.6 | 2006 | 4 | 1-Apr-2006 | 6000 | 16 | |
1.6 | 2006 | 5 | 1-May-2006 | 6000 | 17 | |
1.6 | 2006 | 6 | 1-Jun-2006 | 6000 | 18 |
And here is what the anno table looks like:
ANCHOR | FUNCTION | LABEL | LAYER | TEXTCOLOR | X1SPACE | Y1SPACE | ROTATE | X1 | Y1 |
bottom | TEXT | Jan-05 | front | black | datavalue | WALLPERCENT | 45 | 16437 | -8 |
bottom | TEXT | Jan-06 | front | black | datavalue | WALLPERCENT | 45 | 16802 | -8 |
bottom | TEXT | Jan-07 | front | black | datavalue | WALLPERCENT | 45 | 17167 | -8 |
bottom | TEXT | Jan-08 | front | black | datavalue | WALLPERCENT | 45 | 17532 | -8 |
bottom | TEXT | Jan-09 | front | black | datavalue | WALLPERCENT | 45 | 17898 | -8 |
bottom | TEXT | Jan-10 | front | black | datavalue | WALLPERCENT | 45 | 18263 | -8 |
bottom | TEXT | Jan-11 | front | black | datavalue | WALLPERCENT | 45 | 18628 | -8 |
bottom | TEXT | Jan-12 | front | black | datavalue | WALLPERCENT | 45 | 18993 | -8 |
bottom | TEXT | Jan-13 | front | black | datavalue | WALLPERCENT | 45 | 19359 | -8 |
bottom | TEXT | Jan-14 | front | black | datavalue | WALLPERCENT | 45 | 19724 | -8 |
bottom | TEXT | Jan-15 | front | black | datavalue | WALLPERCENT | 45 | 20089 | -8 |
And the plot is attached. I still would love to be able to move the tickmarks inside and to make the gridlines black. Much thanks. I think this thread will be a great reference.
Are you ready for the spotlight? We're accepting content ideas for SAS Innovate 2025 to be held May 6-9 in Orlando, FL. The call is open until September 16. Read more here about why you should contribute and what is in it for you!
Learn the difference between classical and Bayesian statistical approaches and see a few PROC examples to perform Bayesian analysis in this video.
Find more tutorials on the SAS Users YouTube channel.
Select SAS Training centers are offering in-person courses. View upcoming courses for: