BookmarkSubscribeRSS Feed
rfarmenta
Obsidian | Level 7

I am using the below code to create stickman graph using SAS. This code comes from an example Robert Allison posted online. In his example he use 100 people as his population size but I want to increase it to 1000 people, as seen in the code. I was able to get it to run fine with 100 people but the problem  I am running in to is that when I up the population size to 1000 people everything gets spaced weirdly. I  have to have the height of the character really small so they don't overlap and then the spacing on the x axis is too wide. Does anyone know how to change spacing so the stickmen are close to eachother but not overlapping? Code for what I am doing is below.

 

proc format;
value val_fmt
 1 = "Not Infected"
 2 = "Infected"

;
run;


data my_data;
format color_value val_fmt.;
retain x y;
input color_value @@;
if x=. then y=5;
x+1;
if x=21 then do;
 x=1;
 y=y-1;
 end;
datalines;
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

;
run;

goptions device=png;
goptions border;
 
ODS LISTING CLOSE;
ODS HTML path=odsout body="&name..htm"
 (title="")
 style=htmlblue;

goptions gunit=pct htitle=5.5 htext=3.0 ftitle="albany amt/bold" ftext="albany amt" ctext=gray33;

symbol1 font='webdings' value='80'x height=10 color=cx0F1576;
symbol2 font='webdings' value='80'x height=10 color=cxcc0000;

legend1 label=none value=(justify=left) position=(right middle) across=1
 repeat=1 shape=symbol(6,6);

goptions xpixels=1000 ypixels=500;

title1 ls=1.5 move=(-14,+0) "";

/* Showing the gplot axis labels, so you can 'see' that it's a gplot */
axis1 label=none minor=none offset=(11,11);
axis2 label=none minor=none offset=(3,3) ;

proc gplot data=my_data;
plot y*x=color_value/ legend=legend1
 vaxis=axis1 haxis=axis2
 des='' name="&name";
run;

1 REPLY 1
ballardw
Super User

I'm not quite sure what you want for final appearance but I learned a long time ago that if I wanted specific appearance then you want to pay attention to the size UNITS you are specifying for your symbols, legends and axis text.

 

I suspect that if you start by specifying something like height=8pt, put in something for size on the legends symbol and text, and axis tickmarks, values and offsets and change the aspect ratio of your display area so there is a bit more y space and reduce x (since you say small symbols are too far apart) possibly xpixels=700 and ypixels=800.

SAS Innovate 2025: Register Now

Registration is now open for SAS Innovate 2025 , our biggest and most exciting global event of the year! Join us in Orlando, FL, May 6-9.
Sign up by Dec. 31 to get the 2024 rate of just $495.
Register now!

How to Concatenate Values

Learn how use the CAT functions in SAS to join values from multiple variables into a single value.

Find more tutorials on the SAS Users YouTube channel.

SAS Training: Just a Click Away

 Ready to level-up your skills? Choose your own adventure.

Browse our catalog!

Discussion stats
  • 1 reply
  • 961 views
  • 0 likes
  • 2 in conversation