About mano

mano · ‎02-22-2018

When I use proc means on my data, actual mean and median values are -0.00001 or -0.00004 and when I try to present in 2 decimal places, values are showing as -0.00 in my reports. However, instead of -0.00 in my final report, I want to present it as 0.00. Is there are sas function or any tips on resolving my issue. Thanks very much.

mano · ‎09-22-2015

Hi, I am creating a PDF output and I am having blank lines in between the lines of the output (space between the lines is more than what it should be). Due to this page break is not occuring at the intended line number. I am using the same code for 3 other tables and they are working fine.I am not sure why the blank lines are appearing in my output. Any inputs what might causing this issue? For reference, please see the attached output. Thanks, Mano.

mano · ‎06-27-2014

PK- Pharmaco Kinetics PD-Pharmaco Dynamics. I think we analyze the PK and PD properties of drug while the clinical trial is in PHASE I study. Thanks.

mano · ‎06-27-2014

Hi, Can anyone suggest or provide me with good articles for PK and PD analysis. Thanks, Mano.

mano · ‎06-01-2014

Hi, Below is the code that I am using. I copied and pasted the text of treatment labels in my editor window of SAS. I am using SAS 9.1.3 version:- ****Graphics Options****; goptions device=png targetdevice=png xmax=23.4cm ymax=13.5cm ftext="arial" htext=0.5 noborder ; *--------------------------------------------------------------------------------------------*; * Create symbol for each dose level *--------------------------------------------------------------------------------------------*; Legend1 value=(color=blue height=3 'Placebo' '50 µg' '100 µg' '250 µg'); symbol1 interpol=join h=1.5 line=1 value=dot color=black; symbol2 interpol=join h=1.5 line=1 value=dot color=red; symbol3 interpol=join h=1.5 line=1 value=dot color=green; symbol4 interpol=join h=1.5 line=1 value=dot color=blue; /* Specify AXIS statements */ /*Horizontal axis*/ axis1 label =(height=2.5 f='arial' "Study Visit" j=left) order=(0 to 5 by 1) value =(font = 'arial' h=2.5 tick=0 "" tick=1 "" tick=2 "baseline" tick=3 "Month 3" tick=4 "Month 6" tick=5 "Month 12" tick=6 "" ) offset=(2,2) minor=none major=none; /*Vertical axis*/ axis2 order=(&ymin to &ymax by &y_int) label = (height=2.5 f='arial' angle = 90 "Mean Change from Baseline in &cat") value=(height=2.5 font = 'arial') minor =none; run; *--------------------------------------------------------------------------------------------*; * ods formatting *--------------------------------------------------------------------------------------------*; goptions reset=goptions device=png gunit = pct rotate = landscape xmax=22cm ymax=12.3cm htext=10pt ; ods rtf nogtitle nogfoot; ods listing close; ods rtf file="&pathlis.\figures\&outname..rtf" style=tfl headery=1700 footery=845 author="&sysuserid"; proc gplot data = _tr1; plot yvar*visn=trtan/haxis= axis1 vaxis = axis2 legend=legend1 ; run; ods rtf close; ods listing;

mano · ‎06-01-2014

Hi, I am trying to create graphical output and I am using the following legend statement to show Placebo, 50 µg, 100 µg, 250 µg :- Legend1 value=(color=blue height=3 'Placebo' '50 µg' '100 µg' '250 µg'); But this statement is not creating the special symbol and just showing 'Placebo' '50 g' '100 g' '250 g'. Can any one please help me with code to get special characters printed in the RTF output. Thanks, Mano.

mano · ‎06-17-2013

Hi Everyone, I have a table to find the 1) P-values using exact farrington manning method and 2) Confidence limits using Binomial Distribution. Can any one help me with the code or any article which would be of helpful. Thanks, Mano.

mano · ‎06-06-2013

Hi, I am using ODS to produce RTF output and i am having problem with the allignment of values in each treatment groups. Aebodys/aedecod trt1 trt2 trt3 xxxxx/xxxxxxxx 234 (100.0) 123 ( 98.0) 100 ( 79.0) yyyy/yyyyyyyy 98 ( 97.0) 79 ( 89.8) 3 ( 7.0) ddd//fffffffffff 1 ( 23.0) 5 ( 4.5) 23 ( 24.9) gggggggg/hhhhhhhhh 123 ( 88.0) 111 ( 99.0) 98 ( 76.0) I want all the values to be alligned as showned below:- Aebodys/aedecod trt1 trt2 trt3 xxxxx/xxxxxxxx 234 (100.0) 123 ( 98.0) 100 ( 79.0) yyyy/yyyyyyyy 98 ( 97.0) 79 ( 89.8) 3 ( 7.0) ddd//fffffffffff 1 ( 23.0) 5 ( 4.5) 23 ( 24.9) gggggggg/hhhhhhhhh 123 ( 88.0) 111 ( 99.0) 98 ( 76.0) Can any one suggest which ODS options will make my effort easier. Thanks in advance, mano.

mano · ‎06-06-2013

Hi Cynthia, Thanks for the links. It help me a lot in writing advanced or complex reports. Thanks once again.

mano · ‎05-10-2013

.lst output. Its an AE listing..My variables are Usubjid , trtgroup, AEseq, AEonset ,resolution date, AEBODSYS, would be on first page. then usubjid, trtgroup, AE seq, AEser, AEsev, AErel, AEacn , Outcome would be on second page. Thanks for your attention, Mano.

mano · ‎05-10-2013

hi, I have a listing where 1st part is on 1st page so the title for first page would be Listing xx (part 1 of 2). for title 2nd page would be Listing (part 2 of 2). Is there any way, so that all odd pages have ;listing xx (part 1 of 2) and all even pages have title Listing xx (part 2 of 2). Thanks in advance, Mano.

mano · ‎05-06-2013

Hi , I have data as which contains the subjid , time( in hours) taken for the first bowel movement from the time of drug being taken and trtgroup. subjid trtgroup time(in hours) 1 control 1 2 control 1 3 control 2 4 control 3 5 experimental 1 6 experimental 4 7 experimental 3 I was asked to calculate 1) P-Value from a log-rank test method and 2) median time from Kaplan-Meier estimator for each trtgroup. can anyone help me with the code. Thanks in advance. Mano.

mano · ‎04-15-2013

Thank you Tom.

mano · ‎04-15-2013

Hi, For ex:- there are 16 variables in x dataset. If we use proc contents , we can see all the variables in the output window. But, if I want to insert all these variables into one single macro variable, is there any way. If i call that macro variable, we need to get all the 16 variables. Any help is appreciated. Thanks in advance, Mano.

mano · ‎04-09-2013

Hi, Can i know the difference between exact and absolute methods of proc compare. when i do compare by using exact method, i am getting differences ;while absolute method shows no differences. Please have a look at the picture below and let me know what causing this differences.If the below is not clear enough, I am also attaching the pic as an attachment. Please find it. Any help is appreciated. Thanks in advance!! xact

Online Status	Offline
Date Last Visited	‎02-22-2018 01:31 PM

Converting negative zero values to absolute zero

Blank lines in the body of the PDF output

Re: PK and PD analysis

PK and PD analysis

Re: how to get "100 µg" in SAS graph output

how to get "100 µg" in SAS graph output

farrington Manning test

allignement of values in ODS output

Re: Different titles for different pages of listings

Re: Different titles for different pages of listings

Re: Help to understand numeric-character-numeric conversion?

Re: insert missing values when condition not satisfied

Converting negative zero values to absolute zero

Blank lines in the body of the PDF output

Re: PK and PD analysis

PK and PD analysis

Re: how to get "100 µg" in SAS graph output

how to get "100 µg" in SAS graph output

farrington Manning test

allignement of values in ODS output

Re: Different titles for different pages of listings

Re: Different titles for different pages of listings

Different titles for different pages of listings

proc life test, KM method

Re: insert all variables of a dataset into one macro variable

insert all variables of a dataset into one macro variable

proc compare- exact and absolute methods