%providesurvivalmacros

[GS2]

Using SAS 9.4 I am running the following code to format a KM curve:

data _null_;
%let url = //support.sas.com/documentation/onlinedoc/stat/ex_code/151;
infile "http:&url/templft.html" device=url;

file 'macros.tmp';
retain pre 0;
input;
_infile_ = tranwrd(_infile_, '&', '&');
_infile_ = tranwrd(_infile_, '&lt;' , '<');
if index(_infile_, '</pre>') then pre = 0;
if pre then put _infile_;
if index(_infile_, '<pre>') then pre = 1;
run;

%ProvideSurvivalMacros /* variables available. */

%let TitleText0 = "Figure 2: Implant Survival Free of Reoperation for Infection"; /* Change the title. */
%let TitleText1 = &titletext0 " for " STRATUMID;
%let TitleText2 = &titletext0;
%let xOptions = label="Time to Implant Failure (in Months)"
linearopts=(viewmin=0 viewmax=132
tickvaluelist=(0 12 24 36 48 60 72 84 96 108 120 132));
%let GraphOpts = attrpriority=none
DataLinePatterns=(Solid ShortDash);
%CompileSurvivalTemplates /* Compile the templates with */
/* the new title. */

proc lifetest data = have plots=survival(test ATRISK(maxlen=50));
time TT_fail_months *failure2(0) ;
strata INDEX_TYPE_REV ;
label INDEX_TYPE_REV = 'Index Revision Type'
TT_fail_months = 'Time to Implant Failure (in Months)' ;
run;

%ProvideSurvivalMacros /* Optionally restore the default */
/* macros and macro variables. */

proc template; /* Delete the modified templates. */
delete Stat.Lifetest.Graphics.ProductLimitSurvival / store=sasuser.templat;
delete Stat.Lifetest.Graphics.ProductLimitSurvival2 / store=sasuser.templat;
run;

It has previously run and produced the KM curve as specified. I am returning to it a few months later and now it will not run. Any help would be welcomed. Thank you

Below is my log:

204 data _null_;
205 %let url = //support.sas.com/documentation/onlinedoc/stat/ex_code/151;
206 infile "http:&url/templft.html" device=url;
207
208 file 'macros.tmp';
209 retain pre 0;
210 input;
211 _infile_ = tranwrd(_infile_, '&amp;', '&');
212 _infile_ = tranwrd(_infile_, '&lt;' , '<');
213 if index(_infile_, '</pre>') then pre = 0;
214 if pre then put _infile_;
215 if index(_infile_, '<pre>') then pre = 1;
216 run;

NOTE: The infile "http://support.sas.com/documentation/onlinedoc/stat/ex_code/151/templft.html"
is:
Filename=http://support.sas.com/documentation/onlinedoc/stat/ex_code/151/templft.html,
Local Host Name=OCMRCRSLT014,
Local Host IP addr=fe80::f555:3075:e4:7d2c%24,
Service Hostname Name=support.sas.com,
Service IP addr=149.173.160.38,
Service Name=httpd,Service Portno=80,
Lrecl=32767,Recfm=Variable

NOTE: The file 'macros.tmp' is:
Filename=C:\Users\gscar\Desktop\HK073 Unresectable\macros.tmp,
RECFM=V,LRECL=32767,File Size (bytes)=0,
Last Modified=26May2020:13:30:31,
Create Time=21Feb2020:10:30:04

NOTE: 578 records were read from the infile
"http://support.sas.com/documentation/onlinedoc/stat/ex_code/151/templft.html".
The minimum record length was 0.
The maximum record length was 1076.
NOTE: 361 records were written to the file 'macros.tmp'.
The minimum record length was 0.
The maximum record length was 80.
NOTE: DATA statement used (Total process time):
real time 4.74 seconds
cpu time 0.04 seconds

WARNING: Apparent invocation of macro PROVIDESURVIVALMACROS not resolved.
217
218
219 %ProvideSurvivalMacros /* variables available. */
-
180
ERROR 180-322: Statement is not valid or it is used out of proper order.

220
221 %let TitleText0 = "Figure 2: Implant Survival Free of Reoperation for Infection"; /*
221! Change the title. */
222 %let TitleText1 = &titletext0 " for " STRATUMID;
223 %let TitleText2 = &titletext0;
224 %let xOptions = label="Time to Implant Failure (in Months)"
225 linearopts=(viewmin=0 viewmax=132
226 tickvaluelist=(0 12 24 36 48 60 72 84 96 108 120 132));
227 %let GraphOpts = attrpriority=none
228 DataLinePatterns=(Solid ShortDash);
229 %CompileSurvivalTemplates /* Compile the templates with */
WARNING: Apparent invocation of macro COMPILESURVIVALTEMPLATES not resolved.
230 /* the new title. */
231
232 proc lifetest data = have plots=survival(test ATRISK(maxlen=50))
232! ;

233 time TT_fail_months *failure2(0) ;
----
180

ERROR 180-322: Statement is not valid or it is used out of proper order.

234 strata INDEX_TYPE_REV ;
------
180

ERROR 180-322: Statement is not valid or it is used out of proper order.

235 label INDEX_TYPE_REV = 'Index Revision Type'
-----
180
ERROR 180-322: Statement is not valid or it is used out of proper order.

236 TT_fail_months = 'Time to Implant Failure (in Months)' ;

WARNING: Apparent invocation of macro PROVIDESURVIVALMACROS not resolved.
237 run;
238
239 %ProvideSurvivalMacros /* Optionally restore the default */
-
180
ERROR 180-322: Statement is not valid or it is used out of proper order.

240 /* macros and macro variables. */
241
242 proc template;

242! /* Delete the modified templates. */
243 delete Stat.Lifetest.Graphics.ProductLimitSurvival / store=sasuser.templat;
------
180

ERROR 180-322: Statement is not valid or it is used out of proper order.

244 delete Stat.Lifetest.Graphics.ProductLimitSurvival2 / store=sasuser.templat;
------
180

ERROR 180-322: Statement is not valid or it is used out of proper order.

245 run;

[arthurcavila]

From the log: WARNING: Apparent invocation of macro PROVIDESURVIVALMACROS not resolved.

Did you run the code that creates the macro in your current SAS session before calling the macro?

[WarrenKuhfeld · Accepted solution]

Your data step wrote the macros to a local file. Then you skipped including them.  Look at the documentation.

%inc 'macros.tmp' / nosource;

https://support.sas.com/documentation/onlinedoc/stat/151/kaplan.pdf