I have a put c $ in a program and the output looks like this all on one line as output A
$PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER$DATA ..\TFIT1.CSV IGNORE=W
However I would like the output to look like this as two seperate lines as output B
$PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER
$DATA ..\TFIT1.CSV IGNORE=W
My question is how can I format the put c $ statement to get the output to look like output B and not output A?
Is C one variable only?
How long should br 1st line ?
Can be C so long that you'll want to braek it into more than two lines? If yes - what is the maximum ?
Here is one possibility:
c1 = substr(c,1, 80); /* 80 as max length for 1st line */
c2 = substr(c,81); /* the rest of C to be on next line */
put c1 $;
put c2 $;
Questions: Is C one variable
C is one variable composed of two seperate lines of character data
Question: How long should be 1st line
$PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER
This is no more than 100 characters
Question:Can C be so long that you'll want to break it into more than two lines? If yes - what is the maximum ?
Yes I need two lines and see response above.
I actually put your code into my do loop which resulted in the following output of only the second line(i.e., $DATA ..\TFIT1.CSV IGNORE=W). The first line was not output.
CODE:
[input c $1000.;
do i=1 to 2;
myfile='/folders/myfolders/bootnew/REF' || trim(left(put(i,8.))) || '.ctl';
file dummy filevar=myfile MOD ;
if _n_=2 then do;
if i=1 then do;
amp_loc=index(c,'&');
first_half=substr(c,1,amp_loc-1);
last_half=substr(c,amp_loc+2);
end;
c= trim(first_half) || trim(left(put(i,8.))) || last_half;
c1=substr(c,1,100);
c2=substr(c,81);
end;
put c1 $;
put c2 $;
end;
run;
You were very close to your target.
Change code to:
[input c $1000.;
do i=1 to 2;
myfile='/folders/myfolders/bootnew/REF' || trim(left(put(i,8.))) || '.ctl';
file dummy filevar=myfile MOD ;
if _n_=2 then do;
if i=1 then do;
amp_loc=index(c,'&');
first_half=substr(c,1,amp_loc-1);
last_half=substr(c,amp_loc+2);
end;
c= trim(first_half); output;
c= trim(left(put(i,8.))) || last_half; output;
end;
When I use your code only line 1 is output as:
$PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER 2.CSV IGNORE=W
Line two does not appear. I tried some modifications of your code and either I got only one line output or both output but on the same line.
Please upload your full code and your output;
Code in brackets
[data _null_ ;
infile '/folders/myfolders/bootnew/REF.CTL' firstobs=1 obs=2 truncover;
/* INPUT CHARACTER FILE*/
input c $1000.;
do i=1 to 2;
myfile='/folders/myfolders/bootnew/REF' || trim(left(put(i,8.))) || '.ctl';
file dummy filevar=myfile MOD ;
if _n_=2 then do;
if i=1 then do;
amp_loc=index(c,'&');
first_half=substr(c,1,amp_loc-1);
last_half=substr(c,amp_loc+2);
end;
c= trim(first_half) || trim(left(put(i,8.))) || last_half;
end;
put c $;
end;
run;]
Original file
$PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER
$DATA ..\TFIT&i.CSV IGNORE=W
Output file: All on one line
$PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER $DATA ..\TFIT1.CSV IGNORE=W
It is a guess but run next code (without changes) and upload the result:
(It seems that you break line C into 2 halves and afterwards concatenate the halves back to one line)
data _NULL_;
infile '/folders/myfolders/bootnew/REF.CTL' firstobs=1 obs=2 truncover;
input C $1000. ;
myfile='/folders/myfolders/bootnew/REF' || trim(left(put(i,8.))) || '.ctl';
file dummy filevar=myfile MOD ;
amp_loc=index(c,'&');
first_half=substr(c,1,amp_loc-1);
last_half=substr(c,amp_loc+2);
put first_half $100.;
put last_half $100.;
RUN;
Sorry, I missed something. Ignore my previous post.
Your input is made already of two lines.
You concatenate the two lines to ceate a new C line and then break it into two halves.
You broke it searching for '&' character but you expect 2 lines to start each with '$ character.
here your code with some changes:
data _null_ ;
infile '/folders/myfolders/bootnew/REF.CTL' firstobs=1 obs=2 truncover;
/* INPUT CHARACTER FILE*/
input c $1000.;
do i=1 to 2;
myfile='/folders/myfolders/bootnew/REF' || trim(left(put(i,8.))) || '.ctl';
file dummy filevar=myfile MOD ;
if _n_=2 then do;
if i=1 then do;
amp_loc=index(c,'&');
first_half=substr(c,1,amp_loc-1);
last_half=substr(c,amp_loc+2);
end;
c= trim(first_half) || trim(left(put(i,8.))) || last_half;
line1 = '$' || scan(c,1,'$');
line2 = '$' || scan(c,2,'$');
end;
/* put c $; *** replace to: */
put line1 $100.;
put line2 $100.;
end;
run;
@Shmuel wrote:
Sorry, I missed something. Ignore my previous post.
If you see the "cog" next to the upper right corner of one of your posts you can click on that and select Edit to correct your post.
I tried string statements and scans to identify the two lines as being seperate but the output always contains either both on the same line or in this case of the scan syntax only line 1 was output (i.e., $PROBLEM TWO PEAK SEQUENTIAL ZERO AND FIRST ORDER).
SAS seems to ignore the second line line2 = '$' || scan(c,2,'$');
To all:
I got an answer from SAS consulting and the issue was that the file was UNIX formatted and the addition of termstr=lf resolved the issue.
This command facilitates reading files between UNIX and Windows.
A reply from Support@SAS.com pointed out the file had a Unix format and that the input statement should contain termstr=lf which allowed the input to be read.
Are you ready for the spotlight? We're accepting content ideas for SAS Innovate 2025 to be held May 6-9 in Orlando, FL. The call is open until September 16. Read more here about why you should contribute and what is in it for you!
Learn how use the CAT functions in SAS to join values from multiple variables into a single value.
Find more tutorials on the SAS Users YouTube channel.
Select SAS Training centers are offering in-person courses. View upcoming courses for: