BookmarkSubscribeRSS Feed
🔒 This topic is solved and locked. Need further help from the community? Please sign in and ask a new question.
kumarnaidu
Calcite | Level 5

Hi Please tell me how to calculate geometric mean in sas.Is it possible with proc mean.

1 ACCEPTED SOLUTION

Accepted Solutions
PGStats
Opal | Level 21

From @Ksharp:

SAS has already offered such a function.

 

   x1=geomean(1,2,2,4);

 

More info... Assuming you want the geometric mean because your data has a lognormal distribution, you could do :

  

data test;
set myData;
LogV1 = log(V1);
run;
 
proc means data=test alpha=0.1;
var LogV1;
output out=myStats 
 mean=meanLogV1 
 lclm=lclmLogV1 
 uclm=uclmLogV1;
run;
 
proc sql;
select exp(meanLogV1) as geometricMean, 
 exp(lclmLogV1) as lclmGeoMean, 
 exp(uclmLogV1) as uclmGeoMean
from myStats;
quit;

 

Editor's note: see also:

- this deeper discussion in this thread about uses of the geometric mean.

- blog post from @Rick_SAS about the arithmetic-geometric mean, which includes methods for calculation.

- comment from the OP: "I found that we can directly calculate geometric mean and its confidence interval by proc ttest specifying distribution=lognormal (TTEST doc here)."

 

PG

PG

View solution in original post

11 REPLIES 11
Ksharp
Super User

SAS has already offered such  a function.

x1=geomean(1,2,2,4);

Ksharp

kumarnaidu
Calcite | Level 5

suppose I am having variable(say V1) and I want to calculate its geometric mean and 90% confidence interval.then how to write code for this.

Patrick
Opal | Level 21

Not sure if this link can help:

http://support.sas.com/kb/25/366.html

PGStats
Opal | Level 21

From @Ksharp:

SAS has already offered such a function.

 

   x1=geomean(1,2,2,4);

 

More info... Assuming you want the geometric mean because your data has a lognormal distribution, you could do :

  

data test;
set myData;
LogV1 = log(V1);
run;
 
proc means data=test alpha=0.1;
var LogV1;
output out=myStats 
 mean=meanLogV1 
 lclm=lclmLogV1 
 uclm=uclmLogV1;
run;
 
proc sql;
select exp(meanLogV1) as geometricMean, 
 exp(lclmLogV1) as lclmGeoMean, 
 exp(uclmLogV1) as uclmGeoMean
from myStats;
quit;

 

Editor's note: see also:

- this deeper discussion in this thread about uses of the geometric mean.

- blog post from @Rick_SAS about the arithmetic-geometric mean, which includes methods for calculation.

- comment from the OP: "I found that we can directly calculate geometric mean and its confidence interval by proc ttest specifying distribution=lognormal (TTEST doc here)."

 

PG

PG
Peter_C
Rhodochrosite | Level 12

interesting terminology,
"geometric mean and 90% confidence interval"

Is the confidence interval calculated differently when the appropriate mean is geometric?

(a question from a non-statistician)

PGStats
Opal | Level 21

Peter, the usual reason for choosing the geometric mean as a measure of location is to discount the influence of large observations. The geoMean is always less than the mean and that is sometimes an untold motivation for choosing it. Whether it is appropriate or not, the estimate is a random quantity and it can be characterized by a confidence interval.  The little example below shows two methods for obtaining confidence intervals for both the arithmetic and geometric means. Here, the parametric method wrongly assumes that the data comes from a lognormal distribution.

 


/* Generate random sample from uniform distribution */
%let sampleSize=30;
data test;
call streaminit(8567845);
do i = 1 to &sampleSize.;
x = rand("UNIFORM");
output;
end;
run;
 
/* Get parametric estimates of the mean, geometric mean and confidence intervals */
data logTest;
set test;
logX = log(x);
run;
 
proc means data=logTest noprint;;
var x logX;
output out=parmTest mean=MeanX GeoMeanX 
                    lclm=lclmMeanX lclmGeoMeanX 
                    uclm=uclmMeanX uclmGeoMeanX;
run;
 
/* Get bootstrap estimates of the mean, geometric mean and confidence intervals */
proc surveyselect data=test method=urs sampsize=&sampleSize. 
seed=8634235 reps=10000 out=repTest noprint;
run;
 
proc sql;
create table statTest as
select replicate, mean(x) as meanX, exp(mean(log(x))) as geoMeanX
from repTest
group by replicate;
proc univariate data=statTest noprint;
var meanX geoMeanX;
output out=bootTest mean=MeanX GeoMeanX 
                    p5=lclmMeanX lclmGeoMeanX 
                    p95=uclmMeanX uclmGeoMeanX;
run;
 
/* Assemble result table */
proc sql;
select "Parametric" as estimationMethod, "Arithmetic Mean" as statistic,
meanX label="Estimate", 
    lclmMeanX label="90% Lower conficence interval", 
    uclmMeanX label="90% Upper conficence interval"
from parmTest 
union all
select "Parametric", "Geometric Mean", 
exp(geoMeanX), exp(lclmGeoMeanX), exp(uclmGeoMeanX) from parmTest
union all
select "Bootstrap", "Arithmetic Mean" as statistic,
meanX, lclmMeanX, uclmMeanX from bootTest
union all
select "Bootstrap", "Geometric Mean", 
geoMeanX, lclmGeoMeanX, uclmGeoMeanX from bootTest;
quit;

 

 

  

 

                                                             90% lower   90% upper
                   estimation                               confidence  confidence
                   Method        statistic        Estimate    interval    interval
                   ---------------------------------------------------------------
                   Parametric    Arithmetic Mean  0.507751    0.394374    0.621128
                   Parametric    geometric mean   0.35044     0.229529    0.535045
                   Bootstrap     Arithmetic Mean  0.507732    0.439312    0.576648
                   Bootstrap     geometric mean   0.354656    0.274441    0.456925

 

PG

PG
Peter_C
Rhodochrosite | Level 12

PG

thank you for the mostr effective demonstration and hope you might tolerate an old man's tardy reply.

You have not only confirmed my expectations but demonstrated how much a geo-mean might differ from the arithmetic.

I like the simplicity of the suggestion "discount the influence of large observations". Previously for me, it (geo mean) appeared to be of practical use solely among the tools of the actuary (and perhaps technical investment analysts), providing  the only theoretical way to derive "average" rate of return

(n-th root of) product[( over n periods) of (1+rate_i)] -1

   (where i goes from 1 to n)

Such calculations averaging rates, suffer problems if ever a pereiodic rate_i exceeds -100% as in for example, bankruptcy.

Have I misinterpreted the situation?

Do you see a practical work-around?

PeterC

PGStats
Opal | Level 21

Hi Peter,

 

Well, I don't know much about economics but some errors are common to many fields. The error I see lurking in your argument is one I've made more than once, I'm afraid. When dealing with rates of change, we tend to estimate the change by multiplying the rate by time. But that is an approximation. Things that change at a constant relative rate r obey the equation :

 

 

Y(t) = Y(0)*Exp(r*t)               Eq 1

 

 

which we approximate by

 

 

Y(t) = Y(0) * (1 + r*t)             Eq 2

 

 

that's fine as long as Abs(r*t) is much smaller than one. And that is usually how r is estimated : by looking at change over a short period. Inflation for example can be estimated by looking at the change in prices over a month, and the rate estimated by Equation 2 will be very close to the real value, as long as it is small, 2 or 3 % per year, say. The approximation breaks down when you face something that lost 90% of its value over a month. The rate estimated with Equation 2 will be -10.8 per year when the true value is -27.6. Worse, either of those values, when plugged back in Equation 2 would mean that after two months the value would become negative.

 

Now, let's say you have many ratios Ri = Yi(T)/Yi(0) that you want to summarize with a single value. It makes a lot of sense to use the geometric mean of the Ri to do that because GeoMean(R) = Exp(Mean(r)*T), which is the ratio you would get from the average rate of change. That is the logic, I believe, behind the use of the geometric mean in that context.

 

To summarize: the geometric mean should be calculated on ratios that can be approximated with Equation 2 only when the rate of change is small and the time period is short. Otherwise the geometric mean should be calculated on the actual observed ratios or ratios estimated with Equation 1.

 

PG

PG
pablo_joerger
Calcite | Level 5

Easy and quick to solve with the geomean function.

Further explanations are also didactic and great.

Ksharp
Super User

OK. Try it.

data test ;
input v1 @@;
cards;
1 2 3 4 5 6 7 8 9
;
run;
%let dsid=%sysfunc(open(test,i));
%let nobs=%sysfunc(attrn(&dsid,nobs));
%let dsid=%sysfunc(close(&dsid));
data _null_;
 set test end=last;
 array _g{&nobs} _temporary_;
 _g{_n_}=v1;
 if last then do;
                geomean=geomean(of _g{*});
                put geomean=;
              end;
run;


Ksharp

kumarnaidu
Calcite | Level 5

Hi one thing I found that we can directly calculate geometric mean and its confidence interval by proc ttest specifying distribution=lognormal.

SAS Innovate 2025: Register Now

Registration is now open for SAS Innovate 2025 , our biggest and most exciting global event of the year! Join us in Orlando, FL, May 6-9.
Sign up by Dec. 31 to get the 2024 rate of just $495.
Register now!

What is Bayesian Analysis?

Learn the difference between classical and Bayesian statistical approaches and see a few PROC examples to perform Bayesian analysis in this video.

Find more tutorials on the SAS Users YouTube channel.

SAS Training: Just a Click Away

 Ready to level-up your skills? Choose your own adventure.

Browse our catalog!

Discussion stats
  • 11 replies
  • 39273 views
  • 2 likes
  • 6 in conversation