BookmarkSubscribeRSS Feed
Swapneel
Calcite | Level 5

Hi,

 

Trying to run Proc Opt model. Able to execute it only for 7000 rows. Throwing error for more than 7000.

 

Please find attached details. request you to please let me know, if we could execute it.

 

Thanks and regards

 

 

9 REPLIES 9
RobPratt
SAS Super FREQ

I don't see any attachment.  I just see this:

Attachment

 

 (Virus scan in progress ...)
Swapneel
Calcite | Level 5
 
Swapneel
Calcite | Level 5
 
Swapneel
Calcite | Level 5

Hi Rob,

 

Included once again. Please let me know, if you are able to see it now.

 

 

Swapneel
Calcite | Level 5
CustomerIDSlot1Slot2Slot3Slot4Slot5Slot6Slot7Slot8Slot9Slot10Slot11Slot12Slot13Slot14Slot15Call_Intensity
1000.60.550.50.450.40.350.30.2510.950.90.850.80.750.73
1010.30.2510.950.90.850.80.750.70.650.60.550.50.450.41
1020.650.60.550.50.450.40.350.30.2510.950.90.850.80.753
1030.650.60.550.50.450.40.350.30.2510.950.90.850.80.753
10410.950.90.850.80.750.70.650.60.550.50.450.40.350.32
1050.60.550.50.450.40.350.30.2510.950.90.850.80.750.74
1060.950.90.850.80.750.70.650.60.550.50.450.40.350.30.252
1070.80.750.70.650.60.550.50.450.40.350.30.2510.950.95
1080.650.60.550.50.450.40.350.30.2510.950.90.850.80.753
1090.350.30.2510.950.90.850.80.750.70.650.60.550.50.452
1100.90.850.80.750.70.650.60.550.50.450.40.350.30.2514
1110.30.2510.950.90.850.80.750.70.650.60.550.50.450.44
1120.40.350.30.2510.950.90.850.80.750.70.650.60.550.55
1130.650.60.550.50.450.40.350.30.2510.950.90.850.80.755
1140.60.550.50.450.40.350.30.2510.950.90.850.80.750.75
1150.550.50.450.40.350.30.2510.950.90.850.80.750.70.652
1160.70.650.60.550.50.450.40.350.30.2510.950.90.850.82
1170.350.30.2510.950.90.850.80.750.70.650.60.550.50.451
1180.90.850.80.750.70.650.60.550.50.450.40.350.30.2512
1190.60.550.50.450.40.350.30.2510.950.90.850.80.750.72
1200.2510.950.90.850.80.750.70.650.60.550.50.450.40.352
1210.650.60.550.50.450.40.350.30.2510.950.90.850.80.754
12210.950.90.850.80.750.70.650.60.550.50.450.40.350.35
1230.80.750.70.650.60.550.50.450.40.350.30.2510.950.91
1240.40.350.30.2510.950.90.850.80.750.70.650.60.550.55
1250.40.350.30.2510.950.90.850.80.750.70.650.60.550.51
1260.50.450.40.350.30.2510.950.90.850.80.750.70.650.61
1270.850.80.750.70.650.60.550.50.450.40.350.30.2510.955
1280.450.40.350.30.2510.950.90.850.80.750.70.650.60.551
1290.90.850.80.750.70.650.60.550.50.450.40.350.30.2511
1300.90.850.80.750.70.650.60.550.50.450.40.350.30.2514
1310.950.90.850.80.750.70.650.60.550.50.450.40.350.30.253
1320.750.70.650.60.550.50.450.40.350.30.2510.950.90.852
1330.950.90.850.80.750.70.650.60.550.50.450.40.350.30.255
1340.550.50.450.40.350.30.2510.950.90.850.80.750.70.651
1350.90.850.80.750.70.650.60.550.50.450.40.350.30.2511
1360.450.40.350.30.2510.950.90.850.80.750.70.650.60.553
1370.60.550.50.450.40.350.30.2510.950.90.850.80.750.72
1380.650.60.550.50.450.40.350.30.2510.950.90.850.80.754
1390.450.40.350.30.2510.950.90.850.80.750.70.650.60.551
1400.50.450.40.350.30.2510.950.90.850.80.750.70.650.64
1410.80.750.70.650.60.550.50.450.40.350.30.2510.950.93
1420.450.40.350.30.2510.950.90.850.80.750.70.650.60.553
1430.2510.950.90.850.80.750.70.650.60.550.50.450.40.354
1440.50.450.40.350.30.2510.950.90.850.80.750.70.650.65
1450.950.90.850.80.750.70.650.60.550.50.450.40.350.30.251
1460.60.550.50.450.40.350.30.2510.950.90.850.80.750.74
1470.90.850.80.750.70.650.60.550.50.450.40.350.30.2515
1480.2510.950.90.850.80.750.70.650.60.550.50.450.40.351
14910.950.90.850.80.750.70.650.60.550.50.450.40.350.32
1500.30.2510.950.90.850.80.750.70.650.60.550.50.450.41
1510.350.30.2510.950.90.850.80.750.70.650.60.550.50.452
1520.40.350.30.2510.950.90.850.80.750.70.650.60.550.53
1530.450.40.350.30.2510.950.90.850.80.750.70.650.60.552
1540.70.650.60.550.50.450.40.350.30.2510.950.90.850.85
1550.80.750.70.650.60.550.50.450.40.350.30.2510.950.94
1560.60.550.50.450.40.350.30.2510.950.90.850.80.750.75
15710.950.90.850.80.750.70.650.60.550.50.450.40.350.31
1580.50.450.40.350.30.2510.950.90.850.80.750.70.650.64
1590.90.850.80.750.70.650.60.550.50.450.40.350.30.2511
1600.350.30.2510.950.90.850.80.750.70.650.60.550.50.451
1610.50.450.40.350.30.2510.950.90.850.80.750.70.650.63
1620.30.2510.950.90.850.80.750.70.650.60.550.50.450.44
1630.650.60.550.50.450.40.350.30.2510.950.90.850.80.752
1640.40.350.30.2510.950.90.850.80.750.70.650.60.550.53
1650.350.30.2510.950.90.850.80.750.70.650.60.550.50.451
16610.950.90.850.80.750.70.650.60.550.50.450.40.350.32
1670.50.450.40.350.30.2510.950.90.850.80.750.70.650.64
16810.950.90.850.80.750.70.650.60.550.50.450.40.350.33
1690.850.80.750.70.650.60.550.50.450.40.350.30.2510.953
17010.950.90.850.80.750.70.650.60.550.50.450.40.350.33
1710.950.90.850.80.750.70.650.60.550.50.450.40.350.30.254
17210.950.90.850.80.750.70.650.60.550.50.450.40.350.31
1730.350.30.2510.950.90.850.80.750.70.650.60.550.50.454
1740.70.650.60.550.50.450.40.350.30.2510.950.90.850.85
1750.550.50.450.40.350.30.2510.950.90.850.80.750.70.652
1760.90.850.80.750.70.650.60.550.50.450.40.350.30.2511
1770.80.750.70.650.60.550.50.450.40.350.30.2510.950.92
1780.350.30.2510.950.90.850.80.750.70.650.60.550.50.453
1790.90.850.80.750.70.650.60.550.50.450.40.350.30.2511
1800.70.650.60.550.50.450.40.350.30.2510.950.90.850.84
1810.30.2510.950.90.850.80.750.70.650.60.550.50.450.45
1820.650.60.550.50.450.40.350.30.2510.950.90.850.80.751
18310.950.90.850.80.750.70.650.60.550.50.450.40.350.32
1840.50.450.40.350.30.2510.950.90.850.80.750.70.650.64
1850.750.70.650.60.550.50.450.40.350.30.2510.950.90.855
1860.350.30.2510.950.90.850.80.750.70.650.60.550.50.454
1870.30.2510.950.90.850.80.750.70.650.60.550.50.450.41
1880.40.350.30.2510.950.90.850.80.750.70.650.60.550.52
1890.850.80.750.70.650.60.550.50.450.40.350.30.2510.954
1900.40.350.30.2510.950.90.850.80.750.70.650.60.550.52
1910.850.80.750.70.650.60.550.50.450.40.350.30.2510.953
1920.90.850.80.750.70.650.60.550.50.450.40.350.30.2514
1930.80.750.70.650.60.550.50.450.40.350.30.2510.950.91
proc import out= wfs.Sample_Data
    datafile = 'Sample_Data.xlsx'
    dbms = xlsx;
    sheet = "Data";
    getnames = yes;
run;



proc import out= wfs.Capacity
    datafile = 'Sample_Data.xlsx'
    dbms = xlsx;
    sheet = "Capacity";
    getnames = yes;
run;




Data wfs.chk;
set wfs.Sample_Data;
array cap_slot(15) cap_slot1-cap_slot15;
run;

Data wfs.prefvector_201805_opt_sample;
set wfs.Sample_Data;

/*Call Capacity*/
cap_slot1	=	1329	;
cap_slot2	=	1401	;
cap_slot3	=	1178	;
cap_slot4	=	769	;
cap_slot5	=	202	;
cap_slot6	=	734	;
cap_slot7	=	257	;
cap_slot8	=	1114	;
cap_slot9	=	269	;
cap_slot10	=	1456	;
cap_slot11	=	642	;
cap_slot12	=	412	;
cap_slot13	=	1401	;
cap_slot14	=	126	;
cap_slot15	=	643	;

/*Actual Slot values read from dataset*/
/*
Slot1	=	1;
Slot2	=	1;
Slot3	=	1;
Slot4	=	1;
Slot5	=	1;
Slot6	=	1;
Slot7	=	1;
Slot8	=	1;
Slot9	=	1;
Slot10	=	1;
Slot11	=	1;
Slot12	=	1;
Slot13	=	1;
Slot14	=	1;
Slot15	=	1;
*/

/*Variable Slots*/
F_slot1	=	1;
F_slot2	=	1;
F_slot3	=	1;
F_slot4	=	1;
F_slot5	=	1;
F_slot6	=	1;
F_slot7	=	1;
F_slot8	=	1;
F_slot9	=	1;
F_slot10	=	1;
F_slot11	=	1;
F_slot12	=	1;
F_slot13	=	1;
F_slot14	=	1;
F_slot15	=	1;

/* cip=5;*/


Sum_F_slot1	=	1;
Sum_F_slot2	=	1;
Sum_F_slot3	=	1;
Sum_F_slot4	=	1;
Sum_F_slot5	=	1;
Sum_F_slot6	=	1;
Sum_F_slot7	=	1;
Sum_F_slot8	=	1;
Sum_F_slot9	=	1;
Sum_F_slot10	=	1;
Sum_F_slot11	=	1;
Sum_F_slot12	=	1;
Sum_F_slot13	=	1;
Sum_F_slot14	=	1;
Sum_F_slot15	=	1;

/*Priority Slots*/
P_slot1	=	1;
P_slot2	=	1;
P_slot3	=	1;
P_slot4	=	1;
P_slot5	=	1;
P_slot6	=	1;
P_slot7	=	1;
P_slot8	=	1;
P_slot9	=	1;
P_slot10	=	1;
P_slot11	=	1;
P_slot12	=	1;
P_slot13	=	1;
P_slot14	=	1;
P_slot15	=	1;



keep 

CustomerID
Call_Intensity
cap_slot1
cap_slot2
cap_slot3
cap_slot4
cap_slot5
cap_slot6
cap_slot7
cap_slot8
cap_slot9
cap_slot10
cap_slot11
cap_slot12
cap_slot13
cap_slot14
cap_slot15


Slot1
Slot2
Slot3
Slot4
Slot5
Slot6
Slot7
Slot8
Slot9
Slot10
Slot11
Slot12
Slot13
Slot14
Slot15



F_slot1
F_slot2
F_slot3
F_slot4
F_slot5
F_slot6
F_slot7
F_slot8
F_slot9
F_slot10
F_slot11
F_slot12
F_slot13
F_slot14
F_slot15

cip


Sum_F_slot1
Sum_F_slot2
Sum_F_slot3
Sum_F_slot4
Sum_F_slot5
Sum_F_slot6
Sum_F_slot7
Sum_F_slot8
Sum_F_slot9
Sum_F_slot10
Sum_F_slot11
Sum_F_slot12
Sum_F_slot13
Sum_F_slot14
Sum_F_slot15


P_slot1
P_slot2
P_slot3
P_slot4
P_slot5
P_slot6
P_slot7
P_slot8
P_slot9
P_slot10
P_slot11
P_slot12
P_slot13
P_slot14
P_slot15

;

run;


Data wfs.prefvector_201805_opt_Sample1;
set wfs.prefvector_201805_opt_sample;
/*
if _N_ < 10000;
Cost=50;
*/
run;

proc sql ;
select count(*) into :_Nobs from wfs.prefvector_201805_opt_Sample1  ;
quit ;
%put  &_Nobs. ;


proc optmodel;
/*proc optmilp data=prefvector_201805_opt_Sample1;*/
   set<num> indx;
   number 

Call_Intensity{Indx},
cap_slot1 ,
cap_slot10 ,
cap_slot11 ,
cap_slot12 ,
cap_slot13 ,
cap_slot14 ,
cap_slot15 ,
cap_slot2 ,
cap_slot3 ,
cap_slot4 ,
cap_slot5 ,
cap_slot6 ,
cap_slot7 ,
cap_slot8 ,
cap_slot9 ,
cip{Indx},
CustomerID{Indx},

P_slot1{Indx},
P_slot10{Indx},
P_slot11{Indx},
P_slot12{Indx},
P_slot13{Indx},
P_slot14{Indx},
P_slot15{Indx},
P_slot2{Indx},
P_slot3{Indx},
P_slot4{Indx},
P_slot5{Indx},
P_slot6{Indx},
P_slot7{Indx},
P_slot8{Indx},
P_slot9{Indx},
Slot1{Indx},
Slot10{Indx},
Slot11{Indx},
Slot12{Indx},
Slot13{Indx},
Slot14{Indx},
Slot15{Indx},
Slot2{Indx},
Slot3{Indx},
Slot4{Indx},
Slot5{Indx},
Slot6{Indx},
Slot7{Indx},
Slot8{Indx},
Slot9{Indx},

Sum_F_slot1,
Sum_F_slot10,
Sum_F_slot11,
Sum_F_slot12,
Sum_F_slot13,
Sum_F_slot14,
Sum_F_slot15,
Sum_F_slot2,
Sum_F_slot3,
Sum_F_slot4,
Sum_F_slot5,
Sum_F_slot6,
Sum_F_slot7,
Sum_F_slot8,
Sum_F_slot9
   
 ;
 var 

F_slot1{Indx} Integer,
F_slot10{Indx} Integer,
F_slot11{Indx} Integer,
F_slot12{Indx} Integer,
F_slot13{Indx} Integer,
F_slot14{Indx} Integer,
F_slot15{Indx} Integer,
F_slot2{Indx} Integer,
F_slot3{Indx} Integer,
F_slot4{Indx} Integer,
F_slot5{Indx} Integer,
F_slot6{Indx} Integer,
F_slot7{Indx} Integer,
F_slot8{Indx} Integer,
F_slot9{Indx} Integer,

 X1 {indx} integer,X2 {indx} integer,X3 {indx} integer,X4 {indx} integer,X5 {indx} integer,X6 {indx} integer,X7 {indx} integer,
 X8 {indx} integer,X9 {indx} integer,X10 {indx} integer,X11 {indx} integer,X12 {indx} integer,X13 {indx} integer,X14 {indx} integer,
 X15 {indx} integer  
 ;

                   
     
                  
  read data  wfs.prefvector_201805_opt_Sample1  into  indx=[_N_]
  
 CustomerID = CustomerID 
Call_Intensity	=	Call_Intensity
cap_slot1	=	cap_slot1
cap_slot10	=	cap_slot10
cap_slot11	=	cap_slot11
cap_slot12	=	cap_slot12
cap_slot13	=	cap_slot13
cap_slot14	=	cap_slot14
cap_slot15	=	cap_slot15
cap_slot2	=	cap_slot2
cap_slot3	=	cap_slot3
cap_slot4	=	cap_slot4
cap_slot5	=	cap_slot5
cap_slot6	=	cap_slot6
cap_slot7	=	cap_slot7
cap_slot8	=	cap_slot8
cap_slot9	=	cap_slot9
/*cip	=	cip*/
F_slot1	=	F_slot1
F_slot10	=	F_slot10
F_slot11	=	F_slot11
F_slot12	=	F_slot12
F_slot13	=	F_slot13
F_slot14	=	F_slot14
F_slot15	=	F_slot15
F_slot2	=	F_slot2
F_slot3	=	F_slot3
F_slot4	=	F_slot4
F_slot5	=	F_slot5
F_slot6	=	F_slot6
F_slot7	=	F_slot7
F_slot8	=	F_slot8
F_slot9	=	F_slot9
P_slot1	=	P_slot1
P_slot10	=	P_slot10
P_slot11	=	P_slot11
P_slot12	=	P_slot12
P_slot13	=	P_slot13
P_slot14	=	P_slot14
P_slot15	=	P_slot15
P_slot2	=	P_slot2
P_slot3	=	P_slot3
P_slot4	=	P_slot4
P_slot5	=	P_slot5
P_slot6	=	P_slot6
P_slot7	=	P_slot7
P_slot8	=	P_slot8
P_slot9	=	P_slot9
Slot1	=	Slot1
Slot10	=	Slot10
Slot11	=	Slot11
Slot12	=	Slot12
Slot13	=	Slot13
Slot14	=	Slot14
Slot15	=	Slot15
Slot2	=	Slot2
Slot3	=	Slot3
Slot4	=	Slot4
Slot5	=	Slot5
Slot6	=	Slot6
Slot7	=	Slot7
Slot8	=	Slot8
Slot9	=	Slot9
Sum_F_slot1	=	Sum_F_slot1
Sum_F_slot10	=	Sum_F_slot10
Sum_F_slot11	=	Sum_F_slot11
Sum_F_slot12	=	Sum_F_slot12
Sum_F_slot13	=	Sum_F_slot13
Sum_F_slot14	=	Sum_F_slot14
Sum_F_slot15	=	Sum_F_slot15
Sum_F_slot2	=	Sum_F_slot2
Sum_F_slot3	=	Sum_F_slot3
Sum_F_slot4	=	Sum_F_slot4
Sum_F_slot5	=	Sum_F_slot5
Sum_F_slot6	=	Sum_F_slot6
Sum_F_slot7	=	Sum_F_slot7
Sum_F_slot8	=	Sum_F_slot8
Sum_F_slot9	=	Sum_F_slot9
;


number n = &_Nobs.;  /* size of matrix */


con d1 {i in 1..n}:  X1[i]= (F_slot1[i] );
con d2 {i in 1..n}:  X2[i]= (F_slot2[i] );
con d3 {i in 1..n}:  X3[i]= (F_slot3[i] );
con d4 {i in 1..n}:  X4[i]= (F_slot4[i] );
con d5 {i in 1..n}:  X5[i]= (F_slot5[i] );
con d6 {i in 1..n}:  X6[i]= (F_slot6[i] );
con d7 {i in 1..n}:  X7[i]= (F_slot7[i] );
con d8 {i in 1..n}:  X8[i]= (F_slot8[i] );
con d9 {i in 1..n}:  X9[i]= (F_slot9[i] );
con d10 {i in 1..n}:  X10[i]= (F_slot10[i] );
con d11 {i in 1..n}:  X11[i]= (F_slot11[i] );
con d12 {i in 1..n}:  X12[i]= (F_slot12[i] );
con d13 {i in 1..n}:  X13[i]= (F_slot13[i] );
con d14 {i in 1..n}:  X14[i]= (F_slot14[i] );
con d15 {i in 1..n}:  X15[i]= (F_slot15[i] );



con Eq1 {i in 1..n}:  X1[i] <= 1 ;
con Eq2 {i in 1..n}:  X2[i] <= 1 ;
con Eq3 {i in 1..n}:  X3[i] <= 1 ;
con Eq4 {i in 1..n}:  X4[i] <= 1 ;
con Eq5 {i in 1..n}:  X5[i] <= 1 ;
con Eq6 {i in 1..n}:  X6[i] <= 1 ;
con Eq7 {i in 1..n}:  X7[i] <= 1 ;
con Eq8 {i in 1..n}:  X8[i] <= 1 ;
con Eq9 {i in 1..n}:  X9[i] <= 1 ;
con Eq10 {i in 1..n}:  X10[i] <= 1 ;
con Eq11 {i in 1..n}:  X11[i] <= 1 ;
con Eq12 {i in 1..n}:  X12[i] <= 1 ;
con Eq13 {i in 1..n}:  X13[i] <= 1 ;
con Eq14 {i in 1..n}:  X14[i] <= 1 ;
con Eq15 {i in 1..n}:  X15[i] <= 1 ;

con Eq16 {i in 1..n}:  X1[i] >= 0 ;
con Eq17 {i in 1..n}:  X2[i] >= 0 ;
con Eq18 {i in 1..n}:  X3[i] >= 0 ;
con Eq19 {i in 1..n}:  X4[i] >= 0 ;
con Eq20 {i in 1..n}:  X5[i] >= 0 ;
con Eq21 {i in 1..n}:  X6[i] >= 0 ;
con Eq22 {i in 1..n}:  X7[i] >= 0 ;
con Eq23 {i in 1..n}:  X8[i] >= 0 ;
con Eq24 {i in 1..n}:  X9[i] >= 0 ;
con Eq25 {i in 1..n}:  X10[i] >= 0 ;
con Eq26 {i in 1..n}:  X11[i] >= 0 ;
con Eq27 {i in 1..n}:  X12[i] >= 0 ;
con Eq28 {i in 1..n}:  X13[i] >= 0 ;
con Eq29 {i in 1..n}:  X14[i] >= 0 ;
con Eq30 {i in 1..n}:  X15[i] >= 0 ;


con Eq31 {i in 1..n}:  (F_slot1[i]+ F_slot2[i]+F_slot3[i]+ F_slot4[i]+F_slot5[i]+ F_slot6[i]+F_slot7[i]+F_slot8[i]+ F_slot9[i]+F_slot10[i]+ F_slot11[i]+F_slot12[i]+ F_slot13[i]+F_slot14[i]+F_slot15[i]) <= Call_Intensity[i];



con q1: sum{i in 1..n}(F_slot1[i])<= 100;
con q2: sum{i in 1..n}(F_slot2[i])<= 150;
con q3: sum{i in 1..n}(F_slot3[i])<= 100;
con q4: sum{i in 1..n}(F_slot4[i])<= 100;
con q5: sum{i in 1..n}(F_slot5[i])<= 100;
con q6: sum{i in 1..n}(F_slot6[i])<= 100;
con q7: sum{i in 1..n}(F_slot7[i])<= 129;
con q8: sum{i in 1..n}(F_slot8[i])<= 100;
con q9: sum{i in 1..n}(F_slot9[i])<= 229;
con q10: sum{i in 1..n}(F_slot10[i])<= 100;
con q11: sum{i in 1..n}(F_slot11[i])<= 100;
con q12: sum{i in 1..n}(F_slot12[i])<= 100;
con q13: sum{i in 1..n}(F_slot13[i])<= 100;
con q14: sum{i in 1..n}(F_slot14[i])<= 100;
con q15: sum{i in 1..n}(F_slot15[i])<= 100;


max Total_cost = sum{i in 1..n}
                    
/*				(P_slot1[i]+ P_slot2[i]+P_slot3[i]+ P_slot4[i]+P_slot5[i]+ P_slot6[i]+P_slot7[i]+P_slot8[i]+ P_slot9[i]+P_slot10[i]+ P_slot11[i]+P_slot12[i]+ P_slot13[i]+P_slot14[i]+P_slot15[i]) ;*/
					
					((Slot1[i] * F_Slot1[i])+
(Slot2[i] * F_Slot2[i])+
(Slot3[i] * F_Slot3[i])+
(Slot4[i] * F_Slot4[i])+
(Slot5[i] * F_Slot5[i])+
(Slot6[i] * F_Slot6[i])+
(Slot7[i] * F_Slot7[i])+
(Slot8[i] * F_Slot8[i])+
(Slot9[i] * F_Slot9[i])+
(Slot10[i] * F_Slot10[i])+
(Slot11[i] * F_Slot11[i])+
(Slot12[i] * F_Slot12[i])+
(Slot13[i] * F_Slot13[i])+
(Slot14[i] * F_Slot14[i])+
(Slot15[i] * F_Slot15[i]));

solve  ;



print F_slot1
F_slot2
F_slot3
F_slot4
F_slot5
F_slot6
F_slot7
F_slot8
F_slot9
F_slot10
F_slot11
F_slot12
F_slot13
F_slot14
F_slot15;


create data wfs.Optmodel from [i] 
CustomerID=CustomerID
F_slot1	=	F_slot1
F_slot10	=	F_slot10
F_slot11	=	F_slot11
F_slot12	=	F_slot12
F_slot13	=	F_slot13
F_slot14	=	F_slot14
F_slot15	=	F_slot15
F_slot2	=	F_slot2
F_slot3	=	F_slot3
F_slot4	=	F_slot4
F_slot5	=	F_slot5
F_slot6	=	F_slot6
F_slot7	=	F_slot7
F_slot8	=	F_slot8
F_slot9	=	F_slot9
call_intensity=call_intensity

; 

run;

proc sql;
create table wfs.Sum_slot as 
select 
Sum(F_Slot1) as Sum_F_Slot1,
Sum(F_Slot2) as Sum_F_Slot2,
Sum(F_Slot3) as Sum_F_Slot3,
Sum(F_Slot4) as Sum_F_Slot4,
Sum(F_Slot5) as Sum_F_Slot5,
Sum(F_Slot6) as Sum_F_Slot6,
Sum(F_Slot7) as Sum_F_Slot7,
Sum(F_Slot8) as Sum_F_Slot8,
Sum(F_Slot9) as Sum_F_Slot9,
Sum(F_Slot10) as Sum_F_Slot10,
Sum(F_Slot11) as Sum_F_Slot11,
Sum(F_Slot12) as Sum_F_Slot12,
Sum(F_Slot13) as Sum_F_Slot13,
Sum(F_Slot14) as Sum_F_Slot14,
Sum(F_Slot15) as Sum_F_Slot15,
Sum(call_intensity) as Sum_call_intensity

from wfs.optmodel;
quit;

data wfs.sum_slot1;
set wfs.Sum_slot;
sum_slot=Sum_F_Slot1+
Sum_F_Slot2+
Sum_F_Slot3+
Sum_F_Slot4+
Sum_F_Slot5+
Sum_F_Slot6+
Sum_F_Slot7+
Sum_F_Slot8+
Sum_F_Slot9+
Sum_F_Slot10+
Sum_F_Slot11+
Sum_F_Slot12+
Sum_F_Slot13+
Sum_F_Slot14+
Sum_F_Slot15;
run;



RobPratt
SAS Super FREQ

You can reduce the code by a factor of 15 by using multiple indices, like X[1,i] instead of X1[i].

 

Also, you can omit constraints Eq1 to Eq30 by using the BINARY option (instead of INTEGER) in the VAR statement for the X variables.

 

Nevertheless, what you have solves quickly for me.  What SAS/OR version are you using, and what does your log look like?

 

NOTE: Problem generation will use 4 threads.
NOTE: The problem has 299970 variables (299970 free, 0 fixed).
NOTE: The problem has 0 binary and 299970 integer variables.
NOTE: The problem has 459969 linear constraints (159999 LE, 149985 EQ, 149985 GE, 0 range).
NOTE: The problem has 899910 linear constraint coefficients.
NOTE: The problem has 0 nonlinear constraints (0 LE, 0 EQ, 0 GE, 0 range).
NOTE: The OPTMODEL presolver is disabled for linear problems.
NOTE: The MILP presolver value AUTOMATIC is applied.
NOTE: The MILP presolver removed 159363 variables and 449955 constraints.
NOTE: The MILP presolver removed 618696 constraint coefficients.
NOTE: The MILP presolver modified 0 constraint coefficients.
NOTE: The presolved problem has 140607 variables, 10014 constraints, and 281214 constraint
      coefficients.
NOTE: The MILP solver is called.
NOTE: The parallel Branch and Cut algorithm is used.
NOTE: The Branch and Cut algorithm is using up to 4 threads.
          Node   Active   Sols    BestInteger      BestBound      Gap    Time
             0        1      2   1708.0000000   1708.0000000    0.00%       2
             0        0      2   1708.0000000   1708.0000000    0.00%       2
NOTE: Optimal.
NOTE: Objective = 1708.
Swapneel
Calcite | Level 5

Hi Rob,

 

Able to put only 1000 records. When these 1000 records are extended to 100, 000 then it gives out of memory error.

 

Thanks

Swapneel
Calcite | Level 5

Hi Rob,

 

Could you advice on how to proceed when number of records are extended to 100,000. Is there a way, we can fine tune or define it in different way?

 

Thanks

RobPratt
SAS Super FREQ

What SAS/OR version are you using, and what does your log look like?

SAS Innovate 2025: Save the Date

 SAS Innovate 2025 is scheduled for May 6-9 in Orlando, FL. Sign up to be first to learn about the agenda and registration!

Save the date!

Multiple Linear Regression in SAS

Learn how to run multiple linear regression models with and without interactions, presented by SAS user Alex Chaplin.

Find more tutorials on the SAS Users YouTube channel.

Discussion stats
  • 9 replies
  • 2371 views
  • 0 likes
  • 2 in conversation