BookmarkSubscribeRSS Feed
☑ This topic is solved. Need further help from the community? Please sign in and ask a new question.
sasdol
Obsidian | Level 7

Hi,

 

I am getting following error which deploying SAS Viya 3.5 on a Red Hat Linux 8 using Ansible on the same host. I haven't edited the repo-setup.yml file which is referenced in the error message. Any hint?  

 

================

[root@sildevdeapetan05 sas_viya_playbook]# ansible-playbook system-assessment.yml
ERROR! couldn't resolve module/action 'zypper'. This often indicates a misspelling, missing collection, or incorrect module path.

The error appears to be in '/sas/install/sas_viya_playbook/internal/repo-setup.yml': line 33, column 5, but may
be elsewhere in the file depending on the exact syntax problem.

The offending line appears to be:


- name: Install sas-cleanutils
^ here

================== 

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
gwootton
SAS Super FREQ
This error is from ansible saying it doesn't have the zypper module available. The zypper module is referenced in repo-setup.yml to install the sas-cleanutils package on any hosts in the default/suse groups. Perhaps this isn't present in the version of ansible you are using?
--
Greg Wootton | Principal Systems Technical Support Engineer

View solution in original post

16 REPLIES 16
Sajid01
Meteorite | Level 14

Zypper is the command in Suse Linux Eneterprise Server (SLES) corresponding to in Red Hat Enterprise linux.

It would be good if you can make sure that you are using the procedures / files for RHEL an not SLES.

sasdol
Obsidian | Level 7

Sajid,

Thank you for replying and clarifying that zypper is for SLES; however, I have mirrored repository only for Red Hat and installing on Red Hat as well. 

# ./mirrormgr mirror --deployment-data SAS_Viya_deployment_data.zip  -p /mnt/gfs/temp/sas_repos/ --platform x64-redhat-linux-6

Mirroring 1/16 repos/shipped/depentviya/136/depentviya-136-x64_redhat_linux_6-yum

Mirroring 2/16 repos/shipped/espcasvcf/135/espcasvcf-135-x64_redhat_linux_6-yum

Mirroring 3/16 repos/shipped/odbc/125/odbc-125-x64_redhat_linux_6-yum

Mirroring 4/16 repos/shipped/oracle/125/oracle-125-x64_redhat_linux_6-yum

Mirroring 5/16 repos/shipped/pcfile/125/pcfile-125-x64_redhat_linux_6-yum

Mirroring 6/16 repos/shipped/statviya/125/statviya-125-x64_redhat_linux_6-yum

Mirroring 7/16 repos/shipped/va/125/va-125-x64_redhat_linux_6-yum

Mirroring 8/16 repos/shipped/vcmnfnd/126/vcmnfnd-126-x64_redhat_linux_6-yum

45.24 GiB / 45.24 GiB [=========================================================] 100.00% 117.05 MiB/s 6m35s

Mirroring 9/16 sasmd/shipped/depentviya/136/depentviya-136-x64_redhat_linux_6-yumsasmd

147.05 KiB / 147.05 KiB [===========================================================] 100.00% 57.87 KiB/s 2s

Mirroring 10/16 sasmd/shipped/espcasvcf/135/espcasvcf-135-x64_redhat_linux_6-yumsasmd

253.67 KiB / 253.67 KiB [===========================================================] 100.00% 67.03 KiB/s 3s

Mirroring 11/16 sasmd/shipped/odbc/125/odbc-125-x64_redhat_linux_6-yumsasmd

128.88 KiB / 128.88 KiB [===========================================================] 100.00% 53.63 KiB/s 2s

Mirroring 12/16 sasmd/shipped/oracle/125/oracle-125-x64_redhat_linux_6-yumsasmd

137.40 KiB / 137.40 KiB [===========================================================] 100.00% 56.92 KiB/s 2s

Mirroring 13/16 sasmd/shipped/pcfile/125/pcfile-125-x64_redhat_linux_6-yumsasmd

28.78 KiB / 28.78 KiB [=============================================================] 100.00% 38.88 KiB/s 0s

Mirroring 14/16 sasmd/shipped/statviya/125/statviya-125-x64_redhat_linux_6-yumsasmd

2.40 MiB / 2.40 MiB [=============================================================] 100.00% 125.89 KiB/s 19s

Mirroring 15/16 sasmd/shipped/va/125/va-125-x64_redhat_linux_6-yumsasmd

5.63 MiB / 5.63 MiB [=============================================================] 100.00% 161.56 KiB/s 35s

Mirroring 16/16 sasmd/shipped/vcmnfnd/126/vcmnfnd-126-x64_redhat_linux_6-yumsasmd

3.37 MiB / 3.37 MiB [=============================================================] 100.00% 127.74 KiB/s 27s

Done

gwootton
SAS Super FREQ
This error is from ansible saying it doesn't have the zypper module available. The zypper module is referenced in repo-setup.yml to install the sas-cleanutils package on any hosts in the default/suse groups. Perhaps this isn't present in the version of ansible you are using?
--
Greg Wootton | Principal Systems Technical Support Engineer
sasdol
Obsidian | Level 7

@gwootton Thank you for solving the mystery. I was able to narrow down that zypper error is coming if I run the deployment as root and does not get the error if deployment is run as the account created for SAS processes/admin. Your answer clarified about the reason - the difference is Ansible versions - root is using v2.10.17 and SAS admin account is using 2.9.27 (as 2.10.17 available at the system level did not pass the assessment test). Thank you so much for your help.

  

Chethandeepak
Calcite | Level 5

How its been resolved than, im using RHEL8.5 but its rediredting to zypper when I'm running system-assesment.yml . can you please explain how its been resolved?

sasdol
Obsidian | Level 7

We had to downgrade Ansible to before 2.8.4 as per a suggestion from SAS support.

sasdol
Obsidian | Level 7

Correction - had to downgrade to 2.12. 

Chethandeepak
Calcite | Level 5

im using RHEL 8.5 so we installed ansible-core-2.12.2 .is it works for this ?

sasdol
Obsidian | Level 7

Yes, that resolved the issue for me.

 

# rpm -qa | grep ansible
ansible-core-2.12.2-4.el8_6.x86_64
# cat /etc/redhat-release
Red Hat Enterprise Linux release 8.7 (Ootpa)

Chethandeepak
Calcite | Level 5
I have installed ansible-core-2.12.2.4 only buts still this issue persists. Do u have idea regarding this? Please help me out !
sasdol
Obsidian | Level 7

Did you uninstall other version(s), if any?

Chethandeepak
Calcite | Level 5
Yes uninstalled previous versions and installed ansible-core using yum . Is it effects if we use yum instead of pip.
sasdol
Obsidian | Level 7

As per my understandig, yum vs pip will not make any difference as long as you get the correct ansible version. 

 

It seems Ansible had zypper module in earlier versions but it has been removed in some recent releases. SAS playbook uses zypper and is not found in recent Ansible versions. So, don't have any other workaround in mind as in my case just downgrading Ansible resolved the issue. 

gwootton
SAS Super FREQ

The community.general ansible package that includes the zypper plugin is not in ansible-core. You may want to install ansible using pip instead.

 

For clarity: use pip install --user ansible, not pip install --user ansible-core.

--
Greg Wootton | Principal Systems Technical Support Engineer

suga badge.PNGThe SAS Users Group for Administrators (SUGA) is open to all SAS administrators and architects who install, update, manage or maintain a SAS deployment. 

Join SUGA 

Get Started with SAS Information Catalog in SAS Viya

SAS technical trainer Erin Winters shows you how to explore assets, create new data discovery agents, schedule data discovery agents, and much more.

Find more tutorials on the SAS Users YouTube channel.

Discussion stats
  • 16 replies
  • 8183 views
  • 4 likes
  • 5 in conversation