About jcis7

jcis7 · ‎08-18-2022

Thank you! I looked up Sum Function and found: SAS Help Center: SUM Function<> So now, this works: 😊 if sum (of lt90vax(*))=4 then any4=1; else any4=0; run;

jcis7 · ‎08-18-2022

Great - thank you! * The code worked until: 401 402 if sum of lt90vax(*))=4 then any4=1; -- 22 76 ERROR 22-322: Syntax error, expecting one of the following: (, [, {. ERROR 76-322: Syntax error, statement will be ignored. 403 else any4=0; 404 run; NOTE: The SAS System stopped processing this step because of errors. WARNING: The data set WANT may be incomplete. When this step was stopped there were 0 observations and 14 variables. WARNING: Data set WANT was not replaced because this step was stopped. NOTE: DATA statement used (Total process time): real time 0.08 seconds cpu time 0.00 seconds * I tried adding a parenthesis and got the following error: 441 end; 442 443 if sum of (lt90vax(*))=4 then any4=1; -- - 22 386 68 200 76 ERROR 22-322: Syntax error, expecting one of the following: !, !!, &, *, **, +, -, /, ;, <, <=, <>, =, >, ><, >=, AND, EQ, GE, GT, LE, LT, MAX, MIN, NE, NG, NL, OR, ^=, |, ||, ~=. ERROR 386-185: Expecting an arithmetic expression. ERROR 68-185: The function OF is unknown, or cannot be accessed. ERROR 200-322: The symbol is not recognized and will be ignored. ERROR 76-322: Syntax error, statement will be ignored. 444 else any4=0; 445 run; NOTE: The SAS System stopped processing this step because of errors. WARNING: The data set N.WANT may be incomplete. When this step was stopped there were 0 observations and 14 variables. WARNING: Data set N.WANT was not replaced because this step was stopped. NOTE: DATA statement used (Total process time): real time 0.08 seconds cpu time 0.01 seconds * Then I tried removing the 'of' and got the following error: 461 end; 462 463 if sum (lt90vax(*))=4 then any4=1; - 386 200 76 ERROR 386-185: Expecting an arithmetic expression. ERROR 200-322: The symbol is not recognized and will be ignored. ERROR 76-322: Syntax error, statement will be ignored. 464 else any4=0; 465 run; NOTE: The SAS System stopped processing this step because of errors. WARNING: The data set N.WANT may be incomplete. When this step was stopped there were 0 observations and 14 variables. WARNING: Data set N.WANT was not replaced because this step was stopped. NOTE: DATA statement used (Total process time): real time 0.43 seconds cpu time 0.03 seconds Thank you!

jcis7 · ‎08-18-2022

proc transpose data=vax out=vax_wide prefix=pctvax; by id; id year; var pctvax; run; data vax_wide1; set vax_wide; if pctvax2000 < 90 then pctvax2000LT90=1; if pctvax2001 < 90 then pctvax2001LT90=1; if pctvax2002 < 90 then pctvax2002LT90=1; if pctvax2003 < 90 then pctvax2003LT90=1; if pctvax2004 < 90 then pctvax2004LT90=1; if pctvax2005 < 90 then pctvax2005LT90=1; if sum (pctvax2000LT90, pctvax2001LT90, pctvax2002LT90, pctvax2003LT90, pctvax2004LT90, pctvax2005LT90) =4 then any4=1; else any4=0; run; This seems code above seems work for the simplified dataset I created. I'm running into a problem where in the actual dataset, it counts missing values as <90. I can post it as a separate post. Thank you everyone for your help!

jcis7 · ‎08-18-2022

Thanks - I'm looking for school year which is in the results of the code you posted. I'm looking for the school year across the top with the school code listed in the column where the current school year is listed in the results of the code you posted.

jcis7 · ‎08-18-2022

There are 6 years in the data (2000, 2001, 2002, 2003, 2004, 2005) and looking for IDs where pctvax<90 in any four years, for example: Looking for ids with pctvax<90 in the following combination of years 2000, 2001, 2002, 2003 2000, 2002, 2003, 2004 2000, 2001, 2004, 2005 2001, 2002, 2003, 2004 Etc.... Thank you!

jcis7 · ‎08-17-2022

G'day, I've a question -- I'm trying to find observations below a certain cutoff value across any four years for the same ID. Here's the data below and what I tried. I realized it doesn't work. what i want is to have identify in a list that has ids which are below 90 for any four years (Yr), something like the table below. Any help you can give is much appreciated. Or is there a better way to do it in proc sql? Can this be done in the DATA step? Thank you! id pctvax2000 pctvax2001 pctvax2002 pctvax2003 pctvax2004 pctvax2005 pctLT90_2000 pctLT90_2001 pctLT90_2002 pctLT90_2003 pctLT90_2004 pctLT90_2005 any4 1234567 88 90 57 95 77 62 1 0 1 0 1 1 4 1234568 82 91 53 78 90 95 1 0 1 1 0 0 5 *--2017-18 ; DATA vax; INPUT id $ pctvax yr $; CARDS; 1234567 88 2000 1234567 90 2001 1234565 57 2002 1234567 95 2003 1234567 77 2004 1234567 62 2005 1234568 82 2000 1234568 91 2001 1234568 53 2002 1234568 78 2003 1234568 90 2004 1234568 45 2005 ; RUN; data vax1; set vax; if yr='2000' then do; pctvax2000=pctvax; if pctvax2000<90 then pctLT90_2000=1; end; if yr='2001' then do; pctvax2001=pctvax; if pctvax2001<90 then pctLT90_2001=1; end; if yr='2002' then do; pctvax2002=pctvax; if pctvax2002<90 then pctLT90_2002=1; end; if yr='2003' then do; pctvax2003=pctvax; if pctvax2003<90 then pctLT90_2003=1; end; if yr='2004' then do; pctvax2004=pctvax; if pctvax2004<90 then pctLT90_2004=1; end; if yr='2005' then do; pctvax2005=pctvax; if pctvax2005<90 then pctLT90_2005=1; end; if sum(pctLT90_2000, pctLT90_2001, pctLT90_2002, pctLT90_2003, pctLT90_2004, pctLT90_2005)=4 then any4=1; else any4=0; run;

jcis7 · ‎05-02-2022

Hi Cynthia, Appreciate your guidance. I see the compute block needs to be different from what I have for pctutd for the ACROSS usage. I tried using the following (not sure which column SAS sees utd as since I don't have it listed in the column statement compute pctutd; pctutd=c5.sum/c4.sum; endcompute; and I'm now I"m getting the following error message: ERROR: The variable type of C5.SUM is invalid in this context. ERROR: The variable type of C4.SUM is invalid in this context.

jcis7 · ‎04-29-2022

G'day, I have the following program: Part 1 & 2 runs without SAS errors except Part 3 doesn't run. I'm trying to add pctud so that is shows under type (i.e, ask SAS to calculate pctutd across the two different types) and also ask SAS to calculate it for the combined types (which is equivalent to pctutd in Part 2) so it will have 3 columns with pctutd: the first column (after locale, year, grade, and children) with pctutd that sums utd for all types (type=class & nonclass) and divides it by the totalchildren for all types, the 2nd column that sums utd for observations with type=class and divides it by totalchildren for type=class and the 3rd column with pctutd for nonclass, all grouped by locale and year. Any help you can give will be greatly appreciated. And it will have a last column that has the % of entities that have nonclass type: so sas counts and sums the number of entities that have nonclass type for example in locale North and divides it by the total of entities in locale North, etc... Thank you. *Part 1--dataset; data have; input locale $ year $ grade $ totalchildren utd type $; datalines; North 2020 5th 120 119 class South 2020 5th 140 120 nonclass East 2020 5th 18 10 nonclass West 2020 5th 9 9 class North 2020 5th 11 9 class ; *Part 2--program that has no errors except it doesn't give output I want; proc report data = have out=want nowd missing completerows ; column locale year grade totalchildren utd pctutd type; define locale / group 'Locale'; define year / group; define grade / group; define totalchildren / analysis sum; define utd / analysis noprint; define pctutd / computed; compute pctutd; pctutd=utd.sum/totalchildren.sum; endcompute; define type / across 'Type'; *--summarizes ALL; rbreak before /summarize; compute before; locale= 'ALL'; year="current"; grade="5th"; endcomp; run; Current output Type Locale year grade totalchildren pctutd class nonclass ALL current 5th 298 0.8959732 3 2 East 2020 5th 18 0.5555556 0 1 North 2020 5th 131 0.9770992 2 0 South 2020 5th 140 0.8571429 0 1 West 2020 5th 9 1 1 0 *--part 3 - nonworking program proc report data = have out=want nowd missing completerows ; column locale year grade totalchildren type,pctutd ('Overall' type pctutd); define locale / group 'Locale'; define year / group; define grade / group; define totalchildren / analysis sum; define utd / analysis noprint; define pctutd / computed; compute pctutd; pctutd=utd.sum/totalchildren.sum; endcompute; define type / across 'Type'; *--summarizes ALL; rbreak before /summarize; compute before; locale= 'ALL'; year="current"; grade="5th"; endcomp; run;

jcis7 · ‎04-25-2022

Thank you everyone!

jcis7 · ‎04-18-2022

Thanks for catching that I didn't name the dataset in the set statement in the 'data updateddataset' statement 'toupdatedataset' and instead named it 'toupdate'.

jcis7 · ‎04-18-2022

G'day! Appreciate any help you can give. I've two datasets with the following names and content: 'idsdataset' that has the variable name 'id' and 'type' 'toupdatedataset' that has the variable names 'id', 'type', and 'status' I'd like to update the field 'status' in the dataset 'toupdatedataset' with the value 'N' for all of the observations in the 'idsdataset' dataset based on 'id' in both datasets. The outcome I'm looking for is listed in the dataset 'updateddataset'. How can I update 'status' field without needing to enter each 'id' individually? Thank you. data idsdataset; input id $ type$; datalines; 1234567 Pub 1245678 Pub ; data toupdatedataset; input id $ type $ status $; datalines; 1234567 Pub . 1245678 Pub . 2349878 Pri N 3948573 Priv Y ; data updateddataset; set toupdate; if id in ('1234567' , '1245678') then status='N'; run;

jcis7 · ‎04-08-2022

Thank you both🙂

jcis7 · ‎04-07-2022

Can you help me understand: When you ask, am I trying to do something with the file that is active in the editor, do as you asking if I am trying to use a file that was created in the sas program that the filename statement is at the end of? Or are you asking if I'm trying to do something with the SAS program file that is in the filename statement? Based on your question, I selected the 'Break' button to cancel anything that had been running. Then I reran the program that the filename statement is at the end of, and no error came up. Then, I closed SAS, reopened it and the program ran with no errors including the filename import statement at the end. I am trying to figure out if I'm doing something wrong and not do it again in the future. Thank you.

jcis7 · ‎04-07-2022

G'day. I have placed a filename near the end of a SAS program and am getting the following error message: ERROR: At least one file associated with fileref IMPORT is still in use. ERROR: Error in the FILENAME statement. This is the filename code. When I run the file SAS program.sas by itself, I don't get an error statement. Howeber, when I run the program the code below sits in, I get the error statement. filename importv 'C:\SAS Programs\SAS program.sas'; %include importv; Any help you can give will e much appreciated. Thank you.

jcis7 · ‎12-04-2020

Thanks. I tried it and I am still getting the same encoding error. When I check the dataset the encoding is the following: shift-jis Japanese (SJIS)

Online Status	Offline
Date Last Visited	‎08-18-2022 04:17 PM

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Finding a cutoff value across years for a specific ID

Re: proc report across usage

proc report across usage

Re: Update one dataset with same value for selected field for only ids...

Re: Update one dataset with same value for selected field for only ids...

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Update one dataset with same value for selected field for only ids...

Re: Update one dataset with same value for selected field for only ids...

Re: Update one dataset with same value for selected field for only ids...

WARNING: Unable to copy SASUSER registry to WORK registry.

Re: WARNING: Unable to copy SASUSER registry to WORK registry.

Re: Finding a cutoff value across years for a specific ID

Re: How to use drop and rename in the data statement at one time

How to use drop and rename in the data statement at one time

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Re: Finding a cutoff value across years for a specific ID

Finding a cutoff value across years for a specific ID

Re: proc report across usage

proc report across usage

Re: Update one dataset with same value for selected field for only ids...

Re: Update one dataset with same value for selected field for only ids...

Update one dataset with same value for selected field for only ids in ...

Re: ERROR: At least one file associated with fileref IMPORT is still i...

Re: ERROR: At least one file associated with fileref IMPORT is still i...

ERROR: At least one file associated with fileref IMPORT is still in us...

Re: NOTE: Data file J.ALL.DATA is in a format that is native to anothe...