About MariaD

MariaD · ‎07-19-2017

Hi @alexal, This document, starting on step 6, show how add a server on existing logical server: http://support.sas.com/documentation/cdl/en/biasag/63854/HTML/default/viewer.htm#n10006intelplatform00srvradm.htm My problem is, only in version 9.4 because in 9.2 works fine, that I defined a new server following the steps indicated on that document. After add the new server on Object Spawner and restart it, the error appears during validation process. Without any explanation, If I restart several times the object spawner, sometimes start to working (the connection to the new server). So, I try to understand what is going on. I'm more clear now?

MariaD · ‎07-19-2017

Hi @alexal, But if the details explained in this documents: http://support.sas.com/documentation/cdl/en/biasag/63854/HTML/default/viewer.htm#n10006intelplatform00srvradm.htm? Please refer to step 6. Regards,

MariaD · ‎07-19-2017

Hi @alexal, In SAS MC, using sasadm user, go to Server Manager --> SASMain --> SASMain - Logical Workspace Server, With right click on it, I selecting Add Server. In the windows definitions, add name, command, server selected and launch credential. After confirm the creation, I go to Server Manager --> Object Spawner --> Properties. On Servers tab, I select the new Workspace Server created and restart the object spawner services. As I comment, sometimes, after restart object spawner several times, start to validate the Workspace Server... We allways do this, without any problem, in 9.2. Regards,

MariaD · ‎07-19-2017

Hi all, I'm defining a new WorkspaceServer on SASApp (for my installation is called SASMain). After I complete the configuration, I'm select the new Workspace Server on ObjectSpawner and then restart de objectspawner services. But when I try to validate the new workspace server the following menssage appears: [7/19/17 8:40 AM] INFO: Starting simple validation for Workspace server (level 1) - ping [7/19/17 8:40 AM] INFO: Ping successful! [7/19/17 8:40 AM] INFO: Starting extended validation for Workspace server (level 1) - Making a connection [7/19/17 8:40 AM] SEVERE: Objspawn was unable to find server named SASMainIN. If continue trying restarting the object spawner, selecting the server on Spawner, over and over, somethings works. There are any explanation for it? I'm using sasadm@saspw as user in SAS MC.

MariaD · ‎07-17-2017

Hi @alexal, I ran all the tests that I sent you. Do you remember or suggest any other verification that I can execute before install with "-skiposlevelcheck" option? Regards,

MariaD · ‎07-17-2017

Hi @alexal, Following the output for swlist -v | grep -i atomic $ /usr/sbin/swlist -v | grep -i atomic AtomicLib tag AtomicLib software_spec AtomicLib,r=B.11.31.0803.01,a=HP-UX_B.11.31_IA/PA,v=HP control_directory AtomicLib title Library for Atomic APIs. Bundle Name AtomicLib The HP-UX AtomicLib bundle includes AtomicAPIs product. This feature performs atomic operations as mentioned in atomic(3C) man page. install_source uxpsas01:/sas9/atomic/AtomicLib_B.11.31.0803.01_HP-UX_B.11.31_IA_PA.depot contents AtomicAPIs,r=B.11.31.0803.01,a=HP-UX_B.11.31_IA/PA,v=HP optional_contents36 AtomicLib,r=B.11.31.0803.01,a=HP-UX_B.11.31_IA/PA,v=HP Thanks,

MariaD · ‎07-17-2017

Hi @JuanS_OCS, After we installed the patch, a new error appears. Now, SAS says that version B.11.31.1109.367a is installed but can't continue because needs version B.11.31.1109.367a (see error attached). Exactly the same! Do you know what is going on? HP-UX installed # swlist | grep -i QPKBASE QPKBASE B.11.31.1109.367a Base Quality Pack Bundle for HP-UX 11i v3, September 2011 # swlist | grep -i FEATURE11i FEATURE11i B.11.31.1109.367a Feature Enablement Patches for HP-UX 11i v3, September 2011 # swlist | grep -i HWEnable11i HWEnable11i B.11.31.1109.367a Hardware Enablement Patches for HP-UX 11i v3, September 2011 Streams enabled $ /usr/sbin/swlist -l product | grep Streams PHNE_41874 1.0 Streams Pty cumulative patch Streams B.11.31 HP-UX Streams Product Streams-TIO B.11.31 HP-UX_Streams-TIO_Product $ /usr/sbin/kctune -v streampipes Tunable streampipes Description Forces all pipes to be Streams-based pipes (Boolean) Module hpstreams Current Value 1 Value at Next Boot 1 Value at Last Boot 1 Default Value 0 Can Change At Next Boot Only

MariaD · ‎07-17-2017

Thanks Juan. So, you know if B.11.31.1109.367a includes PHKL_41967? Or is necessary to install PHKL_41967 too? The products will be install are: - Base, Stat, Ets, Connect, Miner, IT (to use SAS EG), PCFF, Access to Oracle and Access to SQL. Thanks

MariaD · ‎07-17-2017

Thanks Juan. Yes, I verified that document before, but I said on my original post, only mention "HP-UX 11i version 3 (11.31) operating system, update 9" and "Atomic APIs". It does not have any details about necessary HP-UX hotfixs. There is any other documentation with these details? Regards,

MariaD · ‎07-17-2017

Hi all, I'm trying to install SAS 9.4 on HP-UX. On the same machine SAS 9.2 is intalled (this version remain on it). As per SAS 9.4 System Requiriment's documents, we need HP-UX 11i version 3 (11.31) operating system, update 9 and later, and Atomic APIs product B.11.31.0803.01. On server we have B.11.31.1009.353a. After we installed the required Atomic APIs version, and error appear on SAS installation saying the requirement is B.11.31.1109.367a. There are any other requirements that we need to verify? Or if we install the hotfix B.11.31.1109.367a, we'll capable to complete successfully the installation? Regards,

MariaD · ‎07-17-2017

Hello, Could you please change my userName to Maria, please? Or to MariaD?

MariaD · ‎07-14-2017

Hi all, I'm installing SAS 9.4 in a new filesystem in the same machine that we have 9.2. The two installations will run in parallel, so 9.4 was installed using "Lev2" in order to run in differents port. In SAS MC, for version 9.2, we have definened several libraries, users, grupos, authentication domains and servers. My question is: is possible to make a metadata backup on 9.2 and restore it in 9.4? Or we need to define manually all metadata elements again in SAS MC 9.4? Regards,

MariaD · ‎06-27-2017

Hi, I'm trying to create a shell script to execute SAS in command line. The objetive is use it to run SAS programns in crontab. The shell script created use two parameters, $1 and $2. The first parameter ($1) is the complete path of SAS program to execute and the second one ($2) is the user's name of the responsible. Shell -------- ## $ which sasprogram /usr/bin/sasprogram $ more /usr/bin/sasprogram #!/bin/sh umask 007 PATH=.:opt/bin:/bin:/usr/sbin:/usr/bin:/usr/ccs/bin:/GNU/bin/make:/usr/ucb:/sas/software/SASFoundation/9.2/bin export PATH progpath=`dirname "$1"` prog=`basename "$1"` cd $progpath nohup /<path>/BatchServer/sasbatch.sh -log /<path>/logs/$prog.#Y_#m_#d.log -batch -noterminal -logparm "rollover=session" -xcmd -autoexec /<path>/autoexec.sas -sysparm "$1|$2" & $ ## ---- I'm using the following command line to execute: sasprogram /<path>/SAScode.sas UserName After run, log file is empty as shown below: $ cat /<path>/logs/SAScode.sas.2017_06_26.log NOTE: Log file opened at Mon, 26 Jun 2017 16:11:58.754 And in nohup.out log the following message appears: $ cat nohup.out /<path>/sasbatch.sh[46]: UserName: not found Any ideia what is going on? Regards,

MariaD · ‎06-19-2017

Hi @Tom, I've just run the following command line: runsas /<path>/<program>.sas -initstmt '%let prog=/<path>/Program1.sas; %let usuario= Natalia;' But in log, the parameters prog and usuario are not showing: NOTE: PROCEDURE PRINTTO used (Total process time): real time 0.00 seconds cpu time 0.01 seconds 3 4 /* Verifica Fecha de Inicio */ 5 %let Fecha_Inicio = %sysfunc(datetime(), datetime19.); 6 7 /* Define programa a agendar en Crontab */ 8 %put _user_; GLOBAL FECHA_INICIO 19JUN2017:13:42:39 GLOBAL SYSDBMSG GLOBAL SPDS_CLIENT_COMPILED Mar 25 2010 Any idea why? Regards,

MariaD · ‎06-19-2017

Hi @Patrick, I've just run the following example: sas /<path>/<program>.sas -initstmt '%let prog=Program1; %let usuario= Natalia UserName;' After the execution, the following warning appears in log: 8 %put &prog; WARNING: Apparent symbolic reference PROG not resolved. &prog 9 10 %put &usuario; WARNING: Apparent symbolic reference USUARIO not resolved. &usuario Any suggestion? Regards,

Online Status	Offline
Date Last Visited	‎09-23-2024 06:47 PM

SAS Access to Postgres | Error

SAS Studio Login

SAS EG License - How it works

SAS Horizontal Web Cluster: disable or remove a cluster

Re: Access to BigQuery | Disconnect when execute query

Re: Access to BigQuery | Disconnect when execute query

Re: Access to BigQuery | Disconnect when execute query

Access to BigQuery | Disconnect when execute query

Add-in for Excel: Pivot table error when numeric variable has missing ...

Access to BigQuery | Token

Re: SAS EG License - How it works

Re: SAS Web App Server unable to start

Re: SAS Web App Server unable to start

Re: Import XML file

Re: Integration with FICO Falcon

Unable to update SID on MetadataServer

Re: saspy - Execute SAS from Python

Re: Unable to update SID on MetadataServer

Re: SAS Web App Server unable to start

Re: ERROR: Expecting page, got page -1 instead

Re: ObjectSpawner not find Workspace Server defined

Re: ObjectSpawner not find Workspace Server defined

Re: ObjectSpawner not find Workspace Server defined

ObjectSpawner not find Workspace Server defined

Re: SAS 9.4 on HP-UX

Re: SAS 9.4 on HP-UX

Re: SAS 9.4 on HP-UX

Re: SAS 9.4 on HP-UX

Re: SAS 9.4 on HP-UX

SAS 9.4 on HP-UX

Re: How do you change your community UserName

SAS MC Metadata from 9.2 to 9.4

Execute SAS using command line

Re: Unix: passing parameter to a SAS program in command line

Re: Unix: passing parameter to a SAS program in command line

Risk & Finance Analytics