Help using Base SAS procedures

Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

Reply
Contributor
Posts: 25

Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

[ Edited ]

SAS Community,

 

I am running a proc phreg with my code like so:

 

proc phreg data=;

model (t1,t2)*status(0)= variables;

output out=Miles

ressco=name1 name2

resmart=name1 name2;

                          _

                          Error 22-322: Syntax error, expecting one of the following: ;,/, ATRISK, DFBETA, LD, LMAX, LOGLOGS, LOGSURV,                               NUM_LEFT, OUT, RESDEV, RESMART, RESSCH, RESSCO, STDXBETA, SURVIVAL, WTRESSCH, XBETA.

                          Error 202-322: The option or parameter is not recognized and will be ignored

run;

 

I am curious to know why this is.  Output is not allowed when data is set up via programming statements, but I did not use that.  Also, when I remove the line for resmart, the code runs for the other output statistics.

 

 

 

 

 

Super User
Posts: 18,603

Re: Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

Post your exact code and log please.

Contributor
Posts: 25

Re: Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

I edited the post.
Super User
Posts: 18,603

Re: Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

[ Edited ]

You have a space with Name_2

 

And you can't name them the same thing, name1/name2

Super User
Super User
Posts: 6,718

Re: Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

Use the insert code icon (looks like {i}) to paste in SAS logs. Otherwise the forum will reformat to text to look like pretty paragraphs of text and mess up the formatting.

 

Your posted code is using the same variable names for different statistics. You need to give each output variable a different name.

Also your posted code has a space in the middle of the last output variable name.  

It is easier to see if you use the insert SAS code icon (looks like the SAS run icon) as it will display in fixed font.  

 

proc phreg ;
  model (t1,t2)*status(0)= variables;
  output out=Miles
    ressco=name1 name2
    resmart=name1 name 2
  ;
run;

 

 

 

Contributor
Posts: 25

Re: Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA...

Sorry, there is no space, that was a typo here. I still get the same error message.
Contributor
Posts: 25

Error 22-322/Error 202-322

[ Edited ]

SAS Community,

 

Here is my code...I am trying to run a proc phreg as follows:

 

proc phreg data=cars;

model (t1, t2)*status(0)=variables;

output out=gas

ressco=name1 name2 name3

resmart=name1 name2

                          _

;

run;

 

I get the following error messages for ressmart name2:

 

Error 22-322: Syntax error, expecting one of the following: ;, /, ATRISK, DFBETA, LD, LMAX, LOGLOGS, LOGSURV, NUM_LEFT, OUT, RESDEV, RESMART, RESSCH, RESSCO, STDXBETA, SURVIVAL, WTRESSCH, XBETA.

Error 202-322: The option or parameter is not recognized and will be ignored.

 

I did not use the programming statements method so not sure why this will not work?  When I remove the ressmart line, the code runs for the other output statistics.

 

Super User
Posts: 10,889

Re: Error 22-322/Error 202-322

Please post the log with the code and the error. Use a codebox opened with the forum {i} menu icon to preserve formatting. The 322 type errors will usually show an _ where the error was detected and the codebox will preserve the formatting of the log text which the main window doesn't.

 

First I believe that you meant RESMART not RESSMART. If you see an _ under RESSMART that is the unrecognized option.

 

Contributor
Posts: 25

Re: Error 22-322/Error 202-322

Yes. I meant resmart and I still get the error which shows up under name2. Given my current circumstances, I cannot open the codebox please bare with me.
Super User
Posts: 18,603

Re: Error 22-322/Error 202-322

1. Extra S

 

resmart

 

vs

 

ressmart

 

2. OUTPUT Statement

 OUTPUT Statement

keyword=name

specifies the statistics included in the OUTPUT data set and names the new variables that contain the statistics. Specify a keyword for each desired statistic (see the following list of keywords), an equal sign, and either a variable or a list of variables to contain the statistic. The keywords that accept a list of variables are DFBETA, RESSCH, RESSCO, and WTRESSCH. For these keywords, you can specify as many names in name as the number of explanatory variables specified in the MODEL statement. If you specify k names and k is less than the total number of explanatory variables, only the changes for the first k parameter estimates are output. The keywords and the corresponding statistics are as follows:

 

RESMART does not accept a list of variables

 

FYI - I'll merge your two posts, I'm not sure why you posted it twice.

Contributor
Posts: 25

Re: Error 22-322/Error 202-322

I thought my initial post was deleted - sorry. Ok that makes sense, but how would I get the martingale residuals that I need then? Does it output it for all variables automatically?
Super User
Posts: 18,603

Re: Error 22-322/Error 202-322

@Wafflecakes please do not post the same question multiple times and do not edit the posts after the fact - especially your initial posts. 

 

Any clarifications should go in a new post. Otherwise this makes it hard to follow a thread and understand what's happening if things are changing. This is more of a personal pet peeve, but it helps things flow. 

 

 

Contributor
Posts: 25

Re: Error 22-322/Error 202-322

My apologies.  Any thoughts on how I would still generate the martingale residuals?

Super User
Posts: 18,603

Re: Error 22-322/Error 202-322

From what I'm reading, the martingale residual is a single value, not by variable. I could be mistaken, my Survival analysis is rusty.

Super User
Posts: 18,603

Re: Error 22-322/Error 202-322

This works for me:

data Myeloma;                                                       
   input Time VStatus LogBUN HGB Platelet Age LogWBC Frac
         LogPBM Protein SCalc;
   label Time='Survival Time'
         VStatus='0=Alive 1=Dead';
   datalines;
 1.25  1  2.2175   9.4  1  67  3.6628  1  1.9542  12  10
 1.25  1  1.9395  12.0  1  38  3.9868  1  1.9542  20  18
 2.00  1  1.5185   9.8  1  81  3.8751  1  2.0000   2  15
 2.00  1  1.7482  11.3  0  75  3.8062  1  1.2553   0  12
 2.00  1  1.3010   5.1  0  57  3.7243  1  2.0000   3   9
 3.00  1  1.5441   6.7  1  46  4.4757  0  1.9345  12  10
 5.00  1  2.2355  10.1  1  50  4.9542  1  1.6628   4   9
 5.00  1  1.6812   6.5  1  74  3.7324  0  1.7324   5   9
 6.00  1  1.3617   9.0  1  77  3.5441  0  1.4624   1   8
 6.00  1  2.1139  10.2  0  70  3.5441  1  1.3617   1   8
 6.00  1  1.1139   9.7  1  60  3.5185  1  1.3979   0  10
 6.00  1  1.4150  10.4  1  67  3.9294  1  1.6902   0   8
 7.00  1  1.9777   9.5  1  48  3.3617  1  1.5682   5  10
 7.00  1  1.0414   5.1  0  61  3.7324  1  2.0000   1  10
 7.00  1  1.1761  11.4  1  53  3.7243  1  1.5185   1  13
 9.00  1  1.7243   8.2  1  55  3.7993  1  1.7404   0  12
11.00  1  1.1139  14.0  1  61  3.8808  1  1.2788   0  10
11.00  1  1.2304  12.0  1  43  3.7709  1  1.1761   1   9
11.00  1  1.3010  13.2  1  65  3.7993  1  1.8195   1  10
11.00  1  1.5682   7.5  1  70  3.8865  0  1.6721   0  12
11.00  1  1.0792   9.6  1  51  3.5051  1  1.9031   0   9
13.00  1  0.7782   5.5  0  60  3.5798  1  1.3979   2  10
14.00  1  1.3979  14.6  1  66  3.7243  1  1.2553   2  10
15.00  1  1.6021  10.6  1  70  3.6902  1  1.4314   0  11
16.00  1  1.3424   9.0  1  48  3.9345  1  2.0000   0  10
16.00  1  1.3222   8.8  1  62  3.6990  1  0.6990  17  10
17.00  1  1.2304  10.0  1  53  3.8808  1  1.4472   4   9
17.00  1  1.5911  11.2  1  68  3.4314  0  1.6128   1  10
18.00  1  1.4472   7.5  1  65  3.5682  0  0.9031   7   8
19.00  1  1.0792  14.4  1  51  3.9191  1  2.0000   6  15
19.00  1  1.2553   7.5  0  60  3.7924  1  1.9294   5   9
24.00  1  1.3010  14.6  1  56  4.0899  1  0.4771   0   9
25.00  1  1.0000  12.4  1  67  3.8195  1  1.6435   0  10
26.00  1  1.2304  11.2  1  49  3.6021  1  2.0000  27  11
32.00  1  1.3222  10.6  1  46  3.6990  1  1.6335   1   9
35.00  1  1.1139   7.0  0  48  3.6532  1  1.1761   4  10
37.00  1  1.6021  11.0  1  63  3.9542  0  1.2041   7   9
41.00  1  1.0000  10.2  1  69  3.4771  1  1.4771   6  10
41.00  1  1.1461   5.0  1  70  3.5185  1  1.3424   0   9
51.00  1  1.5682   7.7  0  74  3.4150  1  1.0414   4  13
52.00  1  1.0000  10.1  1  60  3.8573  1  1.6532   4  10
54.00  1  1.2553   9.0  1  49  3.7243  1  1.6990   2  10
58.00  1  1.2041  12.1  1  42  3.6990  1  1.5798  22  10
66.00  1  1.4472   6.6  1  59  3.7853  1  1.8195   0   9
67.00  1  1.3222  12.8  1  52  3.6435  1  1.0414   1  10
88.00  1  1.1761  10.6  1  47  3.5563  0  1.7559  21   9
89.00  1  1.3222  14.0  1  63  3.6532  1  1.6232   1   9
92.00  1  1.4314  11.0  1  58  4.0755  1  1.4150   4  11
 4.00  0  1.9542  10.2  1  59  4.0453  0  0.7782  12  10
 4.00  0  1.9243  10.0  1  49  3.9590  0  1.6232   0  13
 7.00  0  1.1139  12.4  1  48  3.7993  1  1.8573   0  10
 7.00  0  1.5315  10.2  1  81  3.5911  0  1.8808   0  11
 8.00  0  1.0792   9.9  1  57  3.8325  1  1.6532   0   8
12.00  0  1.1461  11.6  1  46  3.6435  0  1.1461   0   7
11.00  0  1.6128  14.0  1  60  3.7324  1  1.8451   3   9
12.00  0  1.3979   8.8  1  66  3.8388  1  1.3617   0   9
13.00  0  1.6628   4.9  0  71  3.6435  0  1.7924   0   9
16.00  0  1.1461  13.0  1  55  3.8573  0  0.9031   0   9
19.00  0  1.3222  13.0  1  59  3.7709  1  2.0000   1  10
19.00  0  1.3222  10.8  1  69  3.8808  1  1.5185   0  10
28.00  0  1.2304   7.3  1  82  3.7482  1  1.6721   0   9
41.00  0  1.7559  12.8  1  72  3.7243  1  1.4472   1   9
53.00  0  1.1139  12.0  1  66  3.6128  1  2.0000   1  11
57.00  0  1.2553  12.5  1  66  3.9685  0  1.9542   0  11
77.00  0  1.0792  14.0  1  60  3.6812  0  0.9542   0  12
;

proc phreg data=myeloma;
 model Time*VStatus(0)=LogBUN HGB Platelet Age LogWBC
                         Frac LogPBM Protein SCalc;
output out=gas
ressco=name1
resmart=name2
dfbeta=name3 name4 namd5;
;
run;

Ask a Question
Discussion stats
  • 14 replies
  • 104 views
  • 0 likes
  • 4 in conversation