BookmarkSubscribeRSS Feed
🔒 This topic is solved and locked. Need further help from the community? Please sign in and ask a new question.
FelixSta20
Obsidian | Level 7

I am using the following code

s_last=catt(substr(s_last,1,length(s_last)-ns),pxs[locx]);

to add some character string to the original one.

This working in cycle and when the size of string reaches 255 process stops, saying the IML procedure can't allocate buffer longer than 256.

At the same time, when I use the sample code 

test=rowcat(T(p7s));
show test; 

I can see

test      1 row       1 col     (character, size 35280)  

So, My question is, how to make use of  long  character variable, allowing for action like

string_base=catt (string_base, string_add);   

 

1 ACCEPTED SOLUTION

Accepted Solutions
Rick_SAS
SAS Super FREQ

The issue you are encountering is because certain Base SAS concatenation functions (CAT, CATS, CATT, CATX, etc) set the length of an uninitialized variable to 200. If the return value from the function exceeds that length, you will get a warning, such as in the following DATA step:

/* some concatenation functions implicitly set the 
   length that for an unitialized LHS variable to 200 */
data _null_;
s = catt("A", "B");     /* implicitly sets LENGTH s $200 */

/* make a long string */
x1 = "1234567890123456789012345678901234567890";  /* 40 char */
x2 = x1; x3 = x1; x4 = x1; x5 = x1; x6 = x1;
s2 = catt(x1, x2, x3, x4, x5, x6);    /* WARNING: RHS does not fit into length=200 */
run;

The log displays 

WARNING: In a call to the CATT function, the buffer allocated
         for the result was not long enough to contain the
         concatenation of all the arguments. The correct result
         would contain 240 characters, but the actual result
         might either be truncated to 200 character(s) or be
         completely blank, depending on the calling
         environment. The following note indicates the
         left-most argument that caused truncation.

If you call one of the "CAT" functions from IML, you will get similar behavior and the WARNING is coming from the Base function.

 

In the DATA step, you work around this issue by using the LENGTH statement to allocate the left-hand side variable:

length s2 $240;

Because IML uses dynamic allocation for each statement, there is no LENGTH statement in the IML language. Instead, I think you can work around this issue in IML by using the built-in '+' operator, which is the IML version of the concatenation functions. You can combine the '+' operator with the STRIP or TRIM functions if you need to remove blanks.  The following IML program reads in long strings and uses the '+' operator to concatenate them. You can see that the resulting strings are longer than 200 characters:

 

data Have;
/* make long strings */
length s1 s2 $240 x1-x6 $50;
x1 = "1234567890123456789012345678901234567890";  /* 40 char */
x2 = x1; x3 = x1; x4 = x1; x5 = x1; x6 = x1; 
s1 = catt(x1, x2, x3, x4, x5, x6);
s2 = s1;
run;


proc iml;
use Have;
read all var {s1 s2 x1 x2 x3 x4 x5 x6};
close;

s = trim(x1) + trim(x2) + trim(x3) + 
    trim(x4) + trim(x5) + trim(x6);
nlen = nleng(s);
len = length(s);
print nlen len;

s = trim(s1) + trim(s2);
nlen = nleng(s);
len = length(s);
print nlen len;

 

 

View solution in original post

1 REPLY 1
Rick_SAS
SAS Super FREQ

The issue you are encountering is because certain Base SAS concatenation functions (CAT, CATS, CATT, CATX, etc) set the length of an uninitialized variable to 200. If the return value from the function exceeds that length, you will get a warning, such as in the following DATA step:

/* some concatenation functions implicitly set the 
   length that for an unitialized LHS variable to 200 */
data _null_;
s = catt("A", "B");     /* implicitly sets LENGTH s $200 */

/* make a long string */
x1 = "1234567890123456789012345678901234567890";  /* 40 char */
x2 = x1; x3 = x1; x4 = x1; x5 = x1; x6 = x1;
s2 = catt(x1, x2, x3, x4, x5, x6);    /* WARNING: RHS does not fit into length=200 */
run;

The log displays 

WARNING: In a call to the CATT function, the buffer allocated
         for the result was not long enough to contain the
         concatenation of all the arguments. The correct result
         would contain 240 characters, but the actual result
         might either be truncated to 200 character(s) or be
         completely blank, depending on the calling
         environment. The following note indicates the
         left-most argument that caused truncation.

If you call one of the "CAT" functions from IML, you will get similar behavior and the WARNING is coming from the Base function.

 

In the DATA step, you work around this issue by using the LENGTH statement to allocate the left-hand side variable:

length s2 $240;

Because IML uses dynamic allocation for each statement, there is no LENGTH statement in the IML language. Instead, I think you can work around this issue in IML by using the built-in '+' operator, which is the IML version of the concatenation functions. You can combine the '+' operator with the STRIP or TRIM functions if you need to remove blanks.  The following IML program reads in long strings and uses the '+' operator to concatenate them. You can see that the resulting strings are longer than 200 characters:

 

data Have;
/* make long strings */
length s1 s2 $240 x1-x6 $50;
x1 = "1234567890123456789012345678901234567890";  /* 40 char */
x2 = x1; x3 = x1; x4 = x1; x5 = x1; x6 = x1; 
s1 = catt(x1, x2, x3, x4, x5, x6);
s2 = s1;
run;


proc iml;
use Have;
read all var {s1 s2 x1 x2 x3 x4 x5 x6};
close;

s = trim(x1) + trim(x2) + trim(x3) + 
    trim(x4) + trim(x5) + trim(x6);
nlen = nleng(s);
len = length(s);
print nlen len;

s = trim(s1) + trim(s2);
nlen = nleng(s);
len = length(s);
print nlen len;

 

 

SAS Innovate 2025: Call for Content

Are you ready for the spotlight? We're accepting content ideas for SAS Innovate 2025 to be held May 6-9 in Orlando, FL. The call is open until September 25. Read more here about why you should contribute and what is in it for you!

Submit your idea!

Multiple Linear Regression in SAS

Learn how to run multiple linear regression models with and without interactions, presented by SAS user Alex Chaplin.

Find more tutorials on the SAS Users YouTube channel.

From The DO Loop
Want more? Visit our blog for more articles like these.
Discussion stats
  • 1 reply
  • 500 views
  • 3 likes
  • 2 in conversation