The SAS Output Delivery System and reporting techniques

Combining multiple PDF graphs into one combined PDF

Reply
Contributor bts
Contributor
Posts: 23

Combining multiple PDF graphs into one combined PDF

Hello

I've written code that creates multiple PDF pages of graphs, but I'm now looking to see if there's a way to combine the sheets in SAS. Below is my code. The first proc and datastep are setting up the chi-square statistics that will go into the graph footnotes. After that, I set up 6 graphs per page. I have 18 pages (macro_1 to macro_18) that I would prefer to combine in SAS if possible. I tried to add an additional ods pdf file that opens before the graphs and ends after them, but all my formatting in between is lost. 

Thanks!

 

%macro proc_code(var,i,title); 

 

ods output chisq=chi&i;

proc freq data=pd.griffin_collapsed_values;

tables &var*(gender agecat_coll race_coll edu_coll2 income_coll2

employ_coll2)/chisq;

where &var not in (.,99);

run;

quit;

 

data _null_;set chi&i;

       format tmp $40.;

  if Statistic="Chi-Square" and Table="Table &var * Gender"

then do;

  tmp1=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chia&i",tmp1, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * agecat_coll"

then do;

tmp2=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chib&i",tmp2, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * race_coll"

then do;

tmp3=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chic&i",tmp3, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * edu_coll2"

then do;

tmp4=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chid&i",tmp4, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * income_coll2"

then do;

tmp5=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chie&i",tmp5, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * employ_coll2"

then do;

tmp6=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chif&i",tmp6, 'G');

end;

   RUN;    

 

***************************************************************************;

 

GOPTIONS RESET=ALL ftext="Albany AMT";

ods pdf file="\\vmware-host\Shared Folders\Documents\My Documents\PreDict\Hospital Reports\macro_&i .pdf" startpage=never ;

goptions htitle=11pt;

options nodate nonumber;

options leftmargin=0.5in rightmargin=0.5in; 

proc gslide;

title1 "Q&i. &title"  lspace=.5in f="bold";

run;quit;

 

*Bar chart #1;

 

goptions horigin=0 vorigin=6.75 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

   proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=gender

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var not =. and &var ne 99 and gender in (1,2);

format gender genderf. &var yesno.;

title1 "Gender" f="bold" ;

footnote1 j=c h=.75 f=Albany "&chia&i";

    run;

    quit;

 

*Bar chart #2;

 

goptions horigin=4.5 vorigin=6.75 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=agecat_coll

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=5

  coutline=white;

where &var ne . and &var ne 99;

format agecat_coll agec. &var yesno.;

title1 "Age Categories" f=bold;

footnote1 j=c h=.75 f=Albany "&chib&i";

    run;

    quit;

 

*Bar chart #3;

 

goptions horigin=0 vorigin=3.5 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 240 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=race_coll

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99;

format race_coll racec. &var yesno.;

title1 "Race" f=bold;

footnote1 j=c h=.75 f=Albany "&chic&i";

    run;

    quit;

 

*Bar chart #4;

 

goptions horigin=4.5 vorigin=3.5 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=edu_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99 and edu_coll2 ne .;

format edu_coll2 educc. &var yesno.;

title1 "Education" f=bold;

footnote1 j=c h=.75 f=Albany "&chid&i";

    run;

    quit;

 

*Bar chart #5;

 

goptions horigin=0 vorigin=0 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=income_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99;

format income_coll2 incc. &var yesno.;

title1 "Income" f=bold;

footnote1 j=c h=.75 f=Albany "&chie&i";

    run;

    quit;

 

*Bar chart #6;

 

goptions horigin=4.5 vorigin=0 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=employ_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=5

  coutline=white;

where &var ne . and &var ne 99;

format employ_coll2 empc. &var yesno.;

title1 "Employment" f=bold;

footnote1 j=c h=.75 f=Albany "&chif&i";

    run;

    quit;

ods pdf close;

 

title;

footnote;

 

%mend;

 

%proc_code( discuss_pay,1,Hospital personnel came to my room to discuss payment );

%proc_code( doc_language,2,All hospital documents were available in the language I prefer to read );

%proc_code( undstd_docs,3,I understood all the documents I was asked to sign );

%proc_code( undstd_role,4,I understood the role of all hospital personnel entering my room );

%proc_code( questions_hosp,5, Someone explained what I should do if I had questions after leaving the hospital);

%proc_code( comf_read_write,6,Someone asked me how comfortable I am reading and writing in English );

%proc_code( mt_affordmeds,7,A doctor asked me if I could afford my discharge medication );

%proc_code( mt_DNR,8,A doctor and I talked about whether I would want them to try to save me if my heart stopped );

%proc_code( mt_responsib,9,A doctor asked me if I had any responsibilities that would make me need to leave the hospital as soon as possible (for example, child care, work) );

%proc_code( mt_negcom,10, I heard the doctors make negative comments about me);

%proc_code( nt_negcom,11, I heard the nurses make negative comments about me);

%proc_code( ss_negcom,12,I heard the support staff make negative comments about me );

%proc_code( mt_follow_dcins,13,The doctors asked if my day-to-day routine would prevent me from following their discharge care instructions );

%proc_code( mt_takemed,14, The doctors asked if I was taking my medication regularly before coming to the hospital);

%proc_code( mt_fakesymp,15,The doctors told me I was exaggerating or faking my symptoms );

%proc_code( hosp_rules,16,My friends and family had trouble seeing me because of hospital rules );

%proc_code( ss_unattended,17,I was left unattended for a long time when I was taken to have a test );

%proc_code( mt_seniorphys,18,The senior/attending doctor came to see me every day );

 

Grand Advisor
Posts: 9,713

Re: Combining multiple PDF graphs into one combined PDF

Basically after the PDF's are generated then SAS is done with them.

If you want to create multiple graphs and/or tables and have them in a single PDF document then remove the ODS pdf bits from your macro (don't forget the CLOSE statement) and put all of the macro calls within a single ODS PDF sandwich.

 

ods PDF File= "<filestuf>.pdf" <pdf options>;

%proc_code( discuss_pay,1,Hospital personnel came to my room to discuss payment );

%proc_code( doc_language,2,All hospital documents were available in the language I prefer to read );

%proc_code( undstd_docs,3,I understood all the documents I was asked to sign );

%proc_code( undstd_role,4,I understood the role of all hospital personnel entering my room );

%proc_code( questions_hosp,5, Someone explained what I should do if I had questions after leaving the hospital);

%proc_code( comf_read_write,6,Someone asked me how comfortable I am reading and writing in English );

%proc_code( mt_affordmeds,7,A doctor asked me if I could afford my discharge medication );

%proc_code( mt_DNR,8,A doctor and I talked about whether I would want them to try to save me if my heart stopped );

%proc_code( mt_responsib,9,A doctor asked me if I had any responsibilities that would make me need to leave the hospital as soon as possible (for example, child care, work) );

%proc_code( mt_negcom,10, I heard the doctors make negative comments about me);

%proc_code( nt_negcom,11, I heard the nurses make negative comments about me);

%proc_code( ss_negcom,12,I heard the support staff make negative comments about me );

%proc_code( mt_follow_dcins,13,The doctors asked if my day-to-day routine would prevent me from following their discharge care instructions );

%proc_code( mt_takemed,14, The doctors asked if I was taking my medication regularly before coming to the hospital);

%proc_code( mt_fakesymp,15,The doctors told me I was exaggerating or faking my symptoms );

%proc_code( hosp_rules,16,My friends and family had trouble seeing me because of hospital rules );

%proc_code( ss_unattended,17,I was left unattended for a long time when I was taken to have a test );

%proc_code( mt_seniorphys,18,The senior/attending doctor came to see me every day

 

ods pdf close.

 

 

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

I amended my code as suggested (see below), but only the last page was output. All previous ones were overwritten, it seems.

 

%macro proc_code(var,i,title); 

 

proc freq data=pd.griffin_collapsed_values noprint;

tables &var*(gender agecat_coll race_coll edu_coll2 income_coll2

employ_coll2)/chisq out=chi&i;

where &var not in (.,99);

run;

quit;

 

*Create macro variable containing Chi-Square Results for each demographic variable;

  data _null_;set chi&i;

       format tmp $40.;

  if Statistic="Chi-Square" and Table="Table &var * Gender"

then do;

  tmp1=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chia&i",tmp1, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * agecat_coll"

then do;

tmp2=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chib&i",tmp2, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * race_coll"

then do;

tmp3=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chic&i",tmp3, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * edu_coll2"

then do;

tmp4=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chid&i",tmp4, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * income_coll2"

then do;

tmp5=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chie&i",tmp5, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * employ_coll2"

then do;

tmp6=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chif&i",tmp6, 'G');

end;

   RUN;    

 

***************************************************************************;

 

GOPTIONS RESET=ALL ftext="Albany AMT";

goptions htitle=11pt;

options nodate nonumber;

options leftmargin=0.5in rightmargin=0.5in; 

proc gslide;

title1 "Q&i. &title"  lspace=.5in f="bold";

run;quit;

 

*Bar chart #1;

 

goptions horigin=0 vorigin=6.75 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

   proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=gender

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var not =. and &var ne 99 and gender in (1,2);

format gender genderf. &var yesno.;

title1 "Gender" f="bold" ;

footnote1 j=c h=.75 f=Albany "&chia&i";

    run;

    quit;

 

*Bar chart #2;

 

goptions horigin=4.5 vorigin=6.75 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=agecat_coll

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=5

  coutline=white;

where &var ne . and &var ne 99;

format agecat_coll agec. &var yesno.;

title1 "Age Categories" f=bold;

footnote1 j=c h=.75 f=Albany "&chib&i";

    run;

    quit;

 

*Bar chart #3;

 

goptions horigin=0 vorigin=3.5 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 240 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=race_coll

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99;

format race_coll racec. &var yesno.;

title1 "Race" f=bold;

footnote1 j=c h=.75 f=Albany "&chic&i";

    run;

    quit;

 

*Bar chart #4;

 

goptions horigin=4.5 vorigin=3.5 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=edu_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99 and edu_coll2 ne .;

format edu_coll2 educc. &var yesno.;

title1 "Education" f=bold;

footnote1 j=c h=.75 f=Albany "&chid&i";

    run;

    quit;

 

*Bar chart #5;

 

goptions horigin=0 vorigin=0 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=income_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99;

format income_coll2 incc. &var yesno.;

title1 "Income" f=bold;

footnote1 j=c h=.75 f=Albany "&chie&i";

    run;

    quit;

 

*Bar chart #6;

 

goptions horigin=4.5 vorigin=0 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=employ_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=5

  coutline=white;

where &var ne . and &var ne 99;

format employ_coll2 empc. &var yesno.;

title1 "Employment" f=bold;

footnote1 j=c h=.75 f=Albany "&chif&i";

    run;

    quit;

 

title;

footnote;

 

%mend;

 

ods pdf file="\\vmware-host\Shared Folders\Documents\My Documents\PreDict\Hospital Reports\macro_a.pdf" startpage=never ;

 

%proc_code( discuss_pay,1,Hospital personnel came to my room to discuss payment );

%proc_code( doc_language,2,All hospital documents were available in the language I prefer to read );

%proc_code( undstd_docs,3,I understood all the documents I was asked to sign );

%proc_code( undstd_role,4,I understood the role of all hospital personnel entering my room );

%proc_code( questions_hosp,5, Someone explained what I should do if I had questions after leaving the hospital);

%proc_code( comf_read_write,6,Someone asked me how comfortable I am reading and writing in English );

%proc_code( mt_affordmeds,7,A doctor asked me if I could afford my discharge medication );

%proc_code( mt_DNR,8,A doctor and I talked about whether I would want them to try to save me if my heart stopped );

%proc_code( mt_responsib,9,A doctor asked me if I had any responsibilities that would make me need to leave the hospital as soon as possible (for example, child care, work) );

%proc_code( mt_negcom,10, I heard the doctors make negative comments about me);

%proc_code( nt_negcom,11, I heard the nurses make negative comments about me);

%proc_code( ss_negcom,12,I heard the support staff make negative comments about me );

%proc_code( mt_follow_dcins,13,The doctors asked if my day-to-day routine would prevent me from following their discharge care instructions );

%proc_code( mt_takemed,14, The doctors asked if I was taking my medication regularly before coming to the hospital);

%proc_code( mt_fakesymp,15,The doctors told me I was exaggerating or faking my symptoms );

%proc_code( hosp_rules,16,My friends and family had trouble seeing me because of hospital rules );

%proc_code( ss_unattended,17,I was left unattended for a long time when I was taken to have a test );

%proc_code( mt_seniorphys,18,The senior/attending doctor came to see me every day );

ods pdf close;

Grand Advisor
Posts: 16,316

Re: Combining multiple PDF graphs into one combined PDF

Are you sure? Did you re-run the macro definition as well?

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

Yes - i reran the whole thing. In addition, removing the ods output of the chi-square resulted in the output datasets prevented the chisquare datasets from being created. 

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

Rather, the datasets were created, but merely contained 2X2 tables. Not the chi square dataset that "ods output chisq=chi&i;" created.

Grand Advisor
Posts: 16,316

Re: Combining multiple PDF graphs into one combined PDF

Why did you remove it?

 

Can you  post sample data so we can run this? There's a lot of code there so hard to pinpoint. 

 

Otherwise the binary debugging steps. 

1. Remove half of code and run. If error persists try other half of code. 

2. Assuming only one half of code generated error - repeat until issue is found. 

3 . Since your code is repetitive I would do this with my option statements instead until I found the issue. 

Grand Advisor
Posts: 16,316

Re: Combining multiple PDF graphs into one combined PDF

You removed it to keep it from going to PDF -> use ODS select none/all to still generate ODS table but keep it from outputting to PDF file. 

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

i'm attaching sample data (excel) to this message - enough to run the macro twice. And here is the code. I wasn't successful with ods select none, but i think that's my own user error. Really appreciate your help. 

 

 

%macro proc_code(var,i,title);

 

proc freq data=pd.griffin_collapsed_values noprint;

tables &var*(gender agecat_coll race_coll edu_coll2 income_coll2

employ_coll2)/chisq out=chi&i  ;

where &var not in (.,99);

run;

quit;

 

*Create macro variable containing Chi-Square Results for each demographic variable;

  data _null_;set chi&i;

       format tmp $40.;

  if Statistic="Chi-Square" and Table="Table &var * Gender"

then do;

  tmp1=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chia&i",tmp1, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * agecat_coll"

then do;

tmp2=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chib&i",tmp2, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * race_coll"

then do;

tmp3=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chic&i",tmp3, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * edu_coll2"

then do;

tmp4=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chid&i",tmp4, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * income_coll2"

then do;

tmp5=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chie&i",tmp5, 'G');

end;

if Statistic="Chi-Square" and Table="Table &var * employ_coll2"

then do;

tmp6=cat("Chi-Square Results CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob <.001,"<.001",strip(round(prob,.001))));

call symputx("chif&i",tmp6, 'G');

end;

   RUN;    

 

***************************************************************************;

 

GOPTIONS RESET=ALL ftext="Albany AMT";

goptions htitle=11pt;

options nodate nonumber;

options leftmargin=0.5in rightmargin=0.5in; 

proc gslide;

title1 "Q&i. &title"  lspace=.5in f="bold";

run;quit;

 

*Bar chart #1;

 

goptions horigin=0 vorigin=6.75 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

   proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=gender

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var not =. and &var ne 99 and gender in (1,2);

format gender genderf. &var yesno.;

title1 "Gender" f="bold" ;

footnote1 j=c h=.75 f=Albany "&chia&i";

    run;

    quit;

 

 

*Bar chart #2;

 

goptions horigin=4.5 vorigin=6.75 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=agecat_coll

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=5

  coutline=white;

where &var ne . and &var ne 99;

format agecat_coll agec. &var yesno.;

title1 "Age Categories" f=bold;

footnote1 j=c h=.75 f=Albany "&chib&i";

    run;

    quit;

 

*Bar chart #3;

 

goptions horigin=0 vorigin=3.5 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 240 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=race_coll

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99;

format race_coll racec. &var yesno.;

title1 "Race" f=bold;

footnote1 j=c h=.75 f=Albany "&chic&i";

    run;

    quit;

 

*Bar chart #4;

 

goptions horigin=4.5 vorigin=3.5 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=edu_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99 and edu_coll2 ne .;

format edu_coll2 educc. &var yesno.;

title1 "Education" f=bold;

footnote1 j=c h=.75 f=Albany "&chid&i";

    run;

    quit;

 

*Bar chart #5;

 

goptions horigin=0 vorigin=0 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=income_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=6

  coutline=white;

where &var ne . and &var ne 99;

format income_coll2 incc. &var yesno.;

title1 "Income" f=bold;

footnote1 j=c h=.75 f=Albany "&chie&i";

    run;

    quit;

 

*Bar chart #6;

 

goptions horigin=4.5 vorigin=0 hsize=3 vsize=3 htext=7pt htitle=9pt ftitle="bold" gsfmode=append;

axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to 220 by 40) minor=none;

axis2 label=none value=none;

axis3 label=none ;

legend1

label=("Response" h=2 pt position=left j=c)

position=(top inside left) mode=share;

pattern1 v=solid color=CX93BFBF;

pattern2 v=solid color=CX4791ED;

 

proc gchart data=pd.griffin_collapsed_values;

       vbar &var/DISCRETE

       OUTSIDE=PERCENT

  G100

       GROUP=employ_coll2

  SUBGROUP=&var

       RAXIS=axis1

  maxis=axis2

  gaxis=axis3

legend=legend1

space=0

width=5

  coutline=white;

where &var ne . and &var ne 99;

format employ_coll2 empc. &var yesno.;

title1 "Employment" f=bold;

footnote1 j=c h=.75 f=Albany "&chif&i";

    run;

    quit;

 

title;

footnote;

 

%mend;

ods pdf file="\\vmware-host\Shared Folders\Documents\My Documents\test.pdf" startpage=never ;

 

 

%proc_code( discuss_pay,1,Hospital personnel came to my room to discuss payment );

%proc_code(undstd_docs,2,All hospital documents were available in the language I prefer to read );

 

ods pdf close;

Grand Advisor
Posts: 16,316

Re: Combining multiple PDF graphs into one combined PDF

I can't run your code, I only have SAS UE which doesn't support GCHART  or SAS/GRAPHICS. 

Hopefully someone else will be able to help. 

Here's the proc freq that should work, you have to remove the NOPRINT option to 'generate' the table. 

 

ods select none;
proc freq data=pd.griffin_collapsed_values;
tables &var*(gender agecat_coll race_coll edu_coll2 income_coll2
employ_coll2);
where &var not in (.,99);
ods output oneWayFreqs=chi&i;
run;
ods select all;

 

 

PS, if you can switch to SG procedures, in general they have better options and graph quality.

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

That proc freq didn't work for me - I received the following warning, and no datasets were created:

 

WARNING: Output 'oneWayFreqs' was not created.  Make sure that

         the output object name, label, or path is spelled

         correctly.  Also, verify that the appropriate

         procedure options are used to produce the requested

         output object. For example, verify that the NOPRINT

         option is not used.

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

when i replaced oneWayFreqs with chisq, it worked. 

Grand Advisor
Posts: 16,316

Re: Combining multiple PDF graphs into one combined PDF

Yeah, it does help if you use the correct table name Smiley Wink

Grand Advisor
Posts: 16,316

Re: Combining multiple PDF graphs into one combined PDF

I would also move the following to outside your macro:

 

GOPTIONS RESET=ALL ftext="Albany AMT";
goptions htitle=11pt;
options nodate nonumber;
options leftmargin=0.5in rightmargin=0.5in; 

Honestly after reading your code, it really should work. I would restart SAS and see if a fresh start helps.  

 

Remove all your graph codes except for one and if you can post that run with the log I'm curious to see what it says. Use options mprint and symbolgen to allow for better debugging. 

Contributor bts
Contributor
Posts: 23

Re: Combining multiple PDF graphs into one combined PDF

After running as suggested, only the first page is output. Below is the log - there are a number of warning relating to formatting, but I don't see anything else:

 

381

382  %macro proc_code(var,i,title);

383  ods select none;

384  proc freq data=pd.griffin_collapsed_values;

385  tables &var*(gender agecat_coll race_coll edu_coll2

385! income_coll2

386  employ_coll2)/chisq;

387  where &var not in (.,99);

388  ods output chisq=chi&i;

389  run;

390  ods select all;

391

392

393  *Create macro variable containing Chi-Square Results for

393! each demographic variable;

394    data _null_;set chi&i;

395         format tmp $40.;

396          if Statistic="Chi-Square" and Table="Table &var *

396! Gender"

397              then do;

398          tmp1=cat("Chi-Square Results

398! CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

398! <.001,"<.001",strip(round(prob,.001))));

399          call symputx("chia&i",tmp1, 'G');

400          end;

401          if Statistic="Chi-Square" and Table="Table &var *

401! agecat_coll"

402              then do;

403          tmp2=cat("Chi-Square Results

403! CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

403! <.001,"<.001",strip(round(prob,.001))));

404          call symputx("chib&i",tmp2, 'G');

405          end;

406          if Statistic="Chi-Square" and Table="Table &var *

406! race_coll"

407              then do;

408          tmp3=cat("Chi-Square Results

408! CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

408! <.001,"<.001",strip(round(prob,.001))));

409          call symputx("chic&i",tmp3, 'G');

410          end;

411          if Statistic="Chi-Square" and Table="Table &var *

411! edu_coll2"

412              then do;

413          tmp4=cat("Chi-Square Results

413! CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

413! <.001,"<.001",strip(round(prob,.001))));

414          call symputx("chid&i",tmp4, 'G');

415          end;

416          if Statistic="Chi-Square" and Table="Table &var *

416! income_coll2"

417              then do;

418          tmp5=cat("Chi-Square Results

418! CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

418! <.001,"<.001",strip(round(prob,.001))));

419          call symputx("chie&i",tmp5, 'G');

420          end;

421          if Statistic="Chi-Square" and Table="Table &var *

421! employ_coll2"

422              then do;

423          tmp6=cat("Chi-Square Results

423! CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

423! <.001,"<.001",strip(round(prob,.001))));

424          call symputx("chif&i",tmp6, 'G');

425          end;

426     RUN;

427

428  ***********************************************************

428! ****************;

429

430  proc gslide;

431  title1 "Q&i. &title"  lspace=.5in f="bold";

432  run;quit;

433

434  *Bar chart #1;

435

436  goptions horigin=0 vorigin=6.75 hsize=3 vsize=3 htext=7pt

436! htitle=9pt ;

437  axis1 label=(a=90 f="Albany AMT" "Frequency") order=(0 to

437! 220 by 40) minor=none;

438  axis2 label=none value=none;

439  axis3 label=none ;

440  legend1

441   label=("Response" h=2 pt position=left j=c)

442   position=(top inside left) mode=share;

443  pattern1 v=solid color=CX93BFBF;

444  pattern2 v=solid color=CX4791ED;

445

446     proc gchart data=pd.griffin_collapsed_values;

447         vbar &var/DISCRETE

448         OUTSIDE=PERCENT

449         G100

450         GROUP=gender

451         SUBGROUP=&var

452         RAXIS=axis1

453         maxis=axis2

454         gaxis=axis3

455          legend=legend1

456          space=0

457          width=6

458          coutline=white;

459      where &var not =. and &var ne 99 and gender in (1,2);

460      format gender genderf. &var yesno.;

461      title1 "Gender" ;

462      footnote1 j=c h=.75 f=Albany "&chia&i";

463      run;

464      quit;

465

466  title;

467  footnote;

468

469  %mend;

470  ods pdf file="\\vmware-host\Shared Folders\Documents\My

470! Documents\PreDict\Hospital Reports\macro_a.pdf"

470! startpage=never ;

NOTE: Writing ODS PDF output to DISK destination

      "\\vmware-host\Shared Folders\Documents\My

      Documents\PreDict\Hospital Reports\macro_a.pdf",

      printer "PDF".

471

472  GOPTIONS RESET=ALL ftext="Albany AMT";

473  goptions htitle=11pt;

474  options nodate nonumber;

475  options leftmargin=0.5in rightmargin=0.5in;

476  options  mprint symbolgen;

477  %proc_code( discuss_pay,1,Hospital personnel came to my

477! room to discuss payment );

MPRINT(PROC_CODE):   ods select none;

MPRINT(PROC_CODE):   proc freq data=pd.griffin_collapsed_values;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   tables discuss_pay*(gender agecat_coll

race_coll edu_coll2 income_coll2 employ_coll2)/chisq;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   where discuss_pay not in (.,99);

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   ods output chisq=chi1;

MPRINT(PROC_CODE):   run;

NOTE: The data set WORK.CHI1 has 40 observations and 5

      variables.

NOTE: There were 254 observations read from the data set

      PD.GRIFFIN_COLLAPSED_VALUES.

      WHERE discuss_pay not in (., 99);

NOTE: PROCEDURE FREQ used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

 

 

MPRINT(PROC_CODE):   ods select all;

MPRINT(PROC_CODE):   *Create macro variable containing

Chi-Square Results for each demographic variable;

MPRINT(PROC_CODE):   data _null_;

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):  set chi1;

MPRINT(PROC_CODE):   format tmp $40.;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

discuss_pay * Gender" then do;

MPRINT(PROC_CODE):   tmp1=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   call symputx("chia1",tmp1, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

discuss_pay * agecat_coll" then do;

MPRINT(PROC_CODE):   tmp2=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   call symputx("chib1",tmp2, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

discuss_pay * race_coll" then do;

MPRINT(PROC_CODE):   tmp3=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   call symputx("chic1",tmp3, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

discuss_pay * edu_coll2" then do;

MPRINT(PROC_CODE):   tmp4=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   call symputx("chid1",tmp4, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

discuss_pay * income_coll2" then do;

MPRINT(PROC_CODE):   tmp5=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   call symputx("chie1",tmp5, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

discuss_pay * employ_coll2" then do;

MPRINT(PROC_CODE):   tmp6=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 1

MPRINT(PROC_CODE):   call symputx("chif1",tmp6, 'G');

MPRINT(PROC_CODE):   end;

MPRINT(PROC_CODE):   RUN;

 

NOTE: Numeric values have been converted to character

      values at the places given by: (Line)Smiley SadColumn).

      3:41     5:63     6:92     7:113    9:164    10:191

NOTE: Variable tmp is uninitialized.

NOTE: There were 40 observations read from the data set

      WORK.CHI1.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

 

 

MPRINT(PROC_CODE):

****************************************************************

***********;

MPRINT(PROC_CODE):   proc gslide;

SYMBOLGEN:  Macro variable I resolves to 1

SYMBOLGEN:  Macro variable TITLE resolves to Hospital personnel

            came to my room to discuss payment

MPRINT(PROC_CODE):   title1 "Q1 Hospital personnel came to my

room to discuss payment" lspace=.5in f="bold";

MPRINT(PROC_CODE):   run;

 

NOTE: 5929 bytes written to

      C:\Users\bt24\AppData\Local\Temp\1\SAS Temporary

      Files\_TD4600_MW25F6B917-VMW_\gslide4.png.

MPRINT(PROC_CODE):  quit;

 

NOTE: PROCEDURE GSLIDE used (Total process time):

      real time           0.14 seconds

      cpu time            0.12 seconds

 

 

MPRINT(PROC_CODE):   *Bar chart #1;

NOTE: No units specified for the HORIGIN option.  INCHES will

      be used.

NOTE: No units specified for the VORIGIN option.  INCHES will

      be used.

NOTE: No units specified for the HSIZE option.  INCHES will be

      used.

NOTE: No units specified for the VSIZE option.  INCHES will be

      used.

MPRINT(PROC_CODE):   goptions horigin=0 vorigin=6.75 hsize=3

vsize=3 htext=7pt htitle=9pt ;

MPRINT(PROC_CODE):   axis1 label=(a=90 f="Albany AMT"

"Frequency") order=(0 to 220 by 40) minor=none;

MPRINT(PROC_CODE):   axis2 label=none value=none;

MPRINT(PROC_CODE):   axis3 label=none ;

MPRINT(PROC_CODE):   legend1 label=("Response" h=2 pt

position=left j=c) position=(top inside left) mode=share;

MPRINT(PROC_CODE):   pattern1 v=solid color=CX93BFBF;

MPRINT(PROC_CODE):   pattern2 v=solid color=CX4791ED;

MPRINT(PROC_CODE):   proc gchart

data=pd.griffin_collapsed_values;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   vbar discuss_pay/DISCRETE OUTSIDE=PERCENT

G100 GROUP=gender SUBGROUP=discuss_pay RAXIS=axis1 maxis=axis2

gaxis=axis3 legend=legend1 space=0 width=6 coutline=white;

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   where discuss_pay not =. and discuss_pay

ne 99 and gender in (1,2);

SYMBOLGEN:  Macro variable VAR resolves to discuss_pay

MPRINT(PROC_CODE):   format gender genderf. discuss_pay yesno.;

MPRINT(PROC_CODE):   title1 "Gender" ;

WARNING: Apparent symbolic reference CHIA not resolved.

SYMBOLGEN:  Macro variable I resolves to 1

SYMBOLGEN:  Macro variable CHIA1 resolves to Chi-Square Results

            CHISQ(1)=0.57 p0.452

MPRINT(PROC_CODE):   footnote1 j=c h=.75 f=Albany "Chi-Square

Results CHISQ(1)=0.57 p0.452";

MPRINT(PROC_CODE):   run;

WARNING: The VBAR/VBAR3D chart for discuss_pay could not be

         labeled because the labels are wider than the bars.

WARNING: There is not enough room for even one legend entry and

         the label.

WARNING: The legend has been suppressed.

NOTE: Foreground color WHITE same as background. Part of your

      graph might not be visible.

NOTE: 5062 bytes written to

      C:\Users\bt24\AppData\Local\Temp\1\SAS Temporary

      Files\_TD4600_MW25F6B917-VMW_\gchart14.png.

MPRINT(PROC_CODE):   quit;

 

NOTE: There were 250 observations read from the data set

      PD.GRIFFIN_COLLAPSED_VALUES.

      WHERE discuss_pay not in (., 99) and gender in (1, 2);

NOTE: PROCEDURE GCHART used (Total process time):

      real time           0.34 seconds

      cpu time            0.25 seconds

 

 

MPRINT(PROC_CODE):   title;

MPRINT(PROC_CODE):   footnote;

478  %proc_code( doc_language,2,All hospital documents were

478! available in the language I prefer to read   );

MPRINT(PROC_CODE):   ods select none;

MPRINT(PROC_CODE):   proc freq data=pd.griffin_collapsed_values;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   tables doc_language*(gender agecat_coll

race_coll edu_coll2 income_coll2 employ_coll2)/chisq;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   where doc_language not in (.,99);

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   ods output chisq=chi2;

MPRINT(PROC_CODE):   run;

NOTE: The data set WORK.CHI2 has 40 observations and 5

      variables.

NOTE: There were 256 observations read from the data set

      PD.GRIFFIN_COLLAPSED_VALUES.

      WHERE doc_language not in (., 99);

NOTE: PROCEDURE FREQ used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

 

 

MPRINT(PROC_CODE):   ods select all;

MPRINT(PROC_CODE):   *Create macro variable containing

Chi-Square Results for each demographic variable;

MPRINT(PROC_CODE):   data _null_;

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):  set chi2;

MPRINT(PROC_CODE):   format tmp $40.;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

doc_language * Gender" then do;

MPRINT(PROC_CODE):   tmp1=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   call symputx("chia2",tmp1, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

doc_language * agecat_coll" then do;

MPRINT(PROC_CODE):   tmp2=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   call symputx("chib2",tmp2, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

doc_language * race_coll" then do;

MPRINT(PROC_CODE):   tmp3=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   call symputx("chic2",tmp3, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

doc_language * edu_coll2" then do;

MPRINT(PROC_CODE):   tmp4=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   call symputx("chid2",tmp4, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

doc_language * income_coll2" then do;

MPRINT(PROC_CODE):   tmp5=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   call symputx("chie2",tmp5, 'G');

MPRINT(PROC_CODE):   end;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   if Statistic="Chi-Square" and Table="Table

doc_language * employ_coll2" then do;

MPRINT(PROC_CODE):   tmp6=cat("Chi-Square Results

CHISQ","(",DF,")=",round(value,.01)," p",ifc(prob

<.001,"<.001",strip(round(prob,.001))));

SYMBOLGEN:  Macro variable I resolves to 2

MPRINT(PROC_CODE):   call symputx("chif2",tmp6, 'G');

MPRINT(PROC_CODE):   end;

MPRINT(PROC_CODE):   RUN;

 

NOTE: Numeric values have been converted to character

      values at the places given by: (Line)Smiley SadColumn).

      3:41     5:63     6:92     7:113    9:164    10:191

NOTE: Variable tmp is uninitialized.

NOTE: There were 40 observations read from the data set

      WORK.CHI2.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

 

 

MPRINT(PROC_CODE):

****************************************************************

***********;

MPRINT(PROC_CODE):   proc gslide;

SYMBOLGEN:  Macro variable I resolves to 2

SYMBOLGEN:  Macro variable TITLE resolves to All hospital

            documents were available in the language I prefer

            to read

MPRINT(PROC_CODE):   title1 "Q2 All hospital documents were

available in the language I prefer to read" lspace=.5in

f="bold";

MPRINT(PROC_CODE):   run;

 

WARNING: TITLE1 is too long. Height has been reduced to 69.13

         pct of specified or default size.

WARNING: TITLE1 is too long. Height has been reduced to 70.97

         pct of specified or default size.

NOTE: 2683 bytes written to

      C:\Users\bt24\AppData\Local\Temp\1\SAS Temporary

      Files\_TD4600_MW25F6B917-VMW_\gslide5.png.

MPRINT(PROC_CODE):  quit;

 

NOTE: PROCEDURE GSLIDE used (Total process time):

      real time           0.26 seconds

      cpu time            0.20 seconds

 

 

MPRINT(PROC_CODE):   *Bar chart #1;

NOTE: No units specified for the HORIGIN option.  INCHES will

      be used.

NOTE: No units specified for the VORIGIN option.  INCHES will

      be used.

NOTE: No units specified for the HSIZE option.  INCHES will be

      used.

NOTE: No units specified for the VSIZE option.  INCHES will be

      used.

MPRINT(PROC_CODE):   goptions horigin=0 vorigin=6.75 hsize=3

vsize=3 htext=7pt htitle=9pt ;

MPRINT(PROC_CODE):   axis1 label=(a=90 f="Albany AMT"

"Frequency") order=(0 to 220 by 40) minor=none;

MPRINT(PROC_CODE):   axis2 label=none value=none;

MPRINT(PROC_CODE):   axis3 label=none ;

MPRINT(PROC_CODE):   legend1 label=("Response" h=2 pt

position=left j=c) position=(top inside left) mode=share;

MPRINT(PROC_CODE):   pattern1 v=solid color=CX93BFBF;

MPRINT(PROC_CODE):   pattern2 v=solid color=CX4791ED;

MPRINT(PROC_CODE):   proc gchart

data=pd.griffin_collapsed_values;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   vbar doc_language/DISCRETE OUTSIDE=PERCENT

G100 GROUP=gender SUBGROUP=doc_language RAXIS=axis1 maxis=axis2

gaxis=axis3 legend=legend1 space=0 width=6 coutline=white;

SYMBOLGEN:  Macro variable VAR resolves to doc_language

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   where doc_language not =. and doc_language

ne 99 and gender in (1,2);

SYMBOLGEN:  Macro variable VAR resolves to doc_language

MPRINT(PROC_CODE):   format gender genderf. doc_language yesno.;

MPRINT(PROC_CODE):   title1 "Gender" ;

WARNING: Apparent symbolic reference CHIA not resolved.

SYMBOLGEN:  Macro variable I resolves to 2

SYMBOLGEN:  Macro variable CHIA2 resolves to Chi-Square Results

            CHISQ(1)=0 p0.962

MPRINT(PROC_CODE):   footnote1 j=c h=.75 f=Albany "Chi-Square

Results CHISQ(1)=0 p0.962";

MPRINT(PROC_CODE):   run;

WARNING: The VBAR/VBAR3D chart for doc_language could not be

         labeled because the labels are wider than the bars.

WARNING: There is not enough room for even one legend entry and

         the label.

WARNING: The legend has been suppressed.

NOTE: Foreground color WHITE same as background. Part of your

      graph might not be visible.

NOTE: 5009 bytes written to

      C:\Users\bt24\AppData\Local\Temp\1\SAS Temporary

      Files\_TD4600_MW25F6B917-VMW_\gchart15.png.

MPRINT(PROC_CODE):   quit;

 

NOTE: There were 252 observations read from the data set

      PD.GRIFFIN_COLLAPSED_VALUES.

      WHERE doc_language not in (., 99) and gender in (1, 2);

NOTE: PROCEDURE GCHART used (Total process time):

      real time           0.40 seconds

      cpu time            0.29 seconds

 

 

MPRINT(PROC_CODE):   title;

MPRINT(PROC_CODE):   footnote;

479  ods pdf close;

NOTE: ODS PDF printed 1 page to \\vmware-host\Shared

      Folders\Documents\My Documents\PreDict\Hospital

      Reports\macro_a.pdf.

Post a Question
Discussion Stats
  • 15 replies
  • 1054 views
  • 1 like
  • 3 in conversation