topic Date Range Format using PROC FORMAT in SAS Procedures

Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 15:29:33 GMT

My task is to use a PROC MEANS analysis with the output grouped into very specific date ranges. Is it possible to do this through variable formats?

My current code:

PROC FORMAT;
VALUE dtfmt   '14MAY2015'd - '14JUL2015'd ="First 3 months"
'15JUL2015'd - '15OCT2015'd ="Middle"
'16OCT2015'd - '16DEC2015'd ="Last 3 months"
'17DEC2015'd - '26JAN2016'd ="Wrap-up";
RUN;

PROC MEANS data=mydata MEAN STD MAXDEC=2;
CLASS thedate;
VAR var1;
FORMAT thedate dtfmt.;
RUN;

But this does not group the output into the format that I've requested and I end up just getting all dates as their own class. I know that I can create another variable in a data step, but this is purely curiosity about whether anyone else has done something like this through PROC FORMAT.

Best, Lauren

Re: Date Range Format using PROC FORMAT

ballardw — Fri, 14 Aug 2015 15:46:09 GMT

Try this version of the format:

PROC FORMAT;

VALUE dtfmt '14MAY2015'd - '14JUL2015'd ="First 3 months"

'15JUL2015'd - '15OCT2015'd ="Middle"

'16OCT2015'd - '16DEC2015'd ="Last 3 months"

'17DEC2015'd - '26JAN2016'd ="Wrap-up"

other = [mmddyy10.];

RUN;

It will likely show that you have date variables outside the range defined for DTFMT.

If so you will either need to restrict data using a where clause to the specified date range or add and appropriate OTHER range to the format definition. Possibly OTHER='Out of range'

Another possibility is that your date variable is not a SAS date value.

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 16:31:32 GMT

I used your suggestion to add the "other" category and my output returned that all values were out of range. Which makes no sense because when I go to the dataset's column properties, I see:

variable, type, length, format

mydate, number, 8, DATE9.

which indicates to me that it is definitely a date (DATE9. is the typical format for this variable when not being used in this particular analysis). Also, the values that I see in the data are DEFINITELY within those bounds.

Am I incorrectly indicating those date ranges? Are you even ALLOWED to indicate date ranges?

BEst, Lauren

Message was edited by: Lauren Parlett I added a data file with 20 of my observations.

Re: Date Range Format using PROC FORMAT

PhilC — Fri, 14 Aug 2015 16:35:07 GMT

Will the ORDER option for the CLASS statement make a difference?

PROC FORMAT; 
VALUE dtfmt   '14MAY2015'd - '14JUL2015'd ="1-First 3 months" 
              '15JUL2015'd - '15OCT2015'd ="2-Middle" 
              '16OCT2015'd - '16DEC2015'd ="3-Last 3 months" 
              '17DEC2015'd - '26JAN2016'd ="4-Wrap-up"
               other ='Out of range'; 
RUN; 
PROC MEANS data=mydata MEAN STD MAXDEC=2; 
 CLASS thedate / ORDER= FORMATTED;
  VAR var1;
  FORMAT thedate dtfmt.; 
RUN; 

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 16:42:41 GMT

Unfortunately, I still get all dates as "Out of range".

Re: Date Range Format using PROC FORMAT

PhilC — Fri, 14 Aug 2015 16:48:00 GMT

Are you using SAS datetime values versus SAS date values? Will this format definition do better?

PROC FORMAT; 
VALUE dtfmt   '14MAY2015:0:0:0'dt - '14JUL2015:0:0:0'dt ="1-First 3 months" 
              '15JUL2015:0:0:0'dt - '15OCT2015:0:0:0'dt ="2-Middle" 
              '16OCT2015:0:0:0'dt - '16DEC2015:0:0:0'dt ="3-Last 3 months" 
              '17DEC2015:0:0:0'dt - '26JAN2016:0:0:0'dt ="4-Wrap-up"
other ='Out of range'; 
RUN;

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 16:51:37 GMT

I substituted in your format definition. I get the same output from PROC MEANS that all values are out of range. Thank you for your help with this. It's quite puzzling!

Re: Date Range Format using PROC FORMAT

PhilC — Fri, 14 Aug 2015 16:54:31 GMT

No.. Are your dates in string format? It would be nice to see a bit of your data in some form. A PROC PRINT of several rows, and a PROC CONTENTS perhaps.

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 16:57:57 GMT

I added a snippet of my datafile in a reply above.

PROC PRINT:

Obs       mydate    var1

                                 1    14MAY2014     180
                                 2    14MAY2014       .
                                 3    15MAY2014     360
                                 4    19MAY2014     120
                                 5    19MAY2014     120
                                 6    19MAY2014     180
                                 7    20MAY2014     120
                                 8    20MAY2014     120
                                 9    20MAY2014     180
                                10    21MAY2014     300
                                11    21MAY2014     240
                                12    21MAY2014     300
                                13    22MAY2014     120
                                14    24MAY2014     180
                                15    24MAY2014     120
                                16    26MAY2014     180
                                17    27MAY2014     120
                                18    27MAY2014     180
                                19    29MAY2014     240
                                20    02JUN2014     180

CONTENTS:

                               The CONTENTS Procedure

 Data Set Name        WORK.TEST                              Observations          20
 Member Type          DATA                                   Variables             2
 Engine               V9                                     Indexes               0
 Created              Friday, August 14, 2015 12:37:34 PM    Observation Length    16
 Last Modified        Friday, August 14, 2015 12:37:34 PM    Deleted Observations  0
 Protection                                                  Compressed            NO
 Data Set Type                                               Sorted                NO
 Label
 Data Representation  WINDOWS_64
 Encoding             wlatin1  Western (Windows)


                          Engine/Host Dependent Information

Data Set Page Size          4096
Number of Data Set Pages    1
First Data Page             1
Max Obs per Page            252
Obs in First Data Page      20
Number of Data Set Repairs  0
Filename                    test.sas7bdat
Release Created             9.0301M0
Host Created                X64_7PRO


                      Alphabetic List of Variables and Attributes

     #    Variable    Type    Len    Format    Label

     1    mydate      Num       8    DATE9.    Visit Date
     2    var1        Num       8              Total time for procedure (seconds)

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 17:00:27 GMT

And my code and result:

          PROC MEANS data=test N NMISS MEAN STD MEDIAN MAXDEC=1;
          CLASS mydate;
          VAR var1;
          FORMAT mydate dtfmt.;
          RUN;


The MEANS Procedure

             Analysis Variable : var1 Total time for procedure (seconds)

                      N             N
Visit Date          Obs     N    Miss            Mean         Std Dev          Median
ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ
Out of range         20    19       1           186.3            71.8           180.0
ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ

Re: Date Range Format using PROC FORMAT

ballardw — Fri, 14 Aug 2015 17:03:33 GMT

You might want to post some examples of the maximum and minimum date values displayed with a best. format.

I ran your format, and the modified version I suggested, and proc means on one of my data sets with dates. It correctly identified 193 records as "First 3 months". That data set only has date values from 1/1/2015 to 6/30/2015 but worked fine. So it does not appear to be the actual format as a problem.

Run this code:

proc options group=envfiles; run;

Look in the log for the details of FMTSEARCH. There should be something like:

FMTSEARCH = (WORK SASHELP) . <there may be other libraries shown depending on your install>

If your default library is WORK and it does not appear as above then the format was not found to apply.

if that is the case then:

options append=(fmtsearch= (work));

might fix it.

You might verify that the WORK library has a FORMATS catalog with a DTFMT entry. If not then you need to determine in which library that format was created.

Tip: I keep project related data and formats in the same permanent library. And use the options statement to make the formats available. Either save the source code or use the CNTLOUT option to create a dataset that can be read to recreate the formats in a library, again direct the CNTLOUT to the project library. There are issues around SAS upgrades with compiled format compatibility and the data set may be helpful in the future.

Re: Date Range Format using PROC FORMAT

ballardw — Fri, 14 Aug 2015 17:06:20 GMT

May well be that your date does not have any data between 14May2015 and 26Jan2016. A majority of the values in the ranges for that format are in the future...

What is the MAXIMUM value for the date variable in that set?

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 17:10:32 GMT

I just ran the means on the mini dataset.

My formatting:

FMTSEARCH=(SFORMAT WORK)

Changing that option to FMTSEARCH=(work) did not solve the issue.

                            Analysis Variable : mydate Visit Date

                                  Minimum         Maximum
                             ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ
                                 19857.00        19876.00
                             ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ

The format dtfmt entry: WRONG FORMAT HERE (format from earlier post's suggestion of datetime). SEE POST BELOW.

ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ†
     ‚       FORMAT NAME: DTFMT    LENGTH:   16   NUMBER OF VALUES:    5        ‚
     ‚   MIN LENGTH:   1  MAX LENGTH:  40  DEFAULT LENGTH:  16  FUZZ: STD       ‚
     ‡ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ…ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ…ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‰
     ‚START           ‚END             ‚LABEL  (VER. V7|V8   14AUG2015:12:49:32)‚
     ‡ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒˆƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒˆƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‰
     ‚      1747180800‚      1752451200‚1-First 3 months                        ‚
     ‚      1752537600‚      1760486400‚2-Middle                                ‚
     ‚      1760572800‚      1765843200‚3-Last 3 months                         ‚
     ‚      1765929600‚      1769385600‚4-Wrap-up                               ‚
     ‚**OTHER**       ‚**OTHER**       ‚Out of range                            ‚
     Šƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‹ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‹ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ

Message was edited by: Lauren Parlett

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 17:12:37 GMT

Ooops! That format was for the datetime suggestion above. Here it is again:

ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ†
     ‚       FORMAT NAME: DTFMT    LENGTH:   16   NUMBER OF VALUES:    5        ‚
     ‚   MIN LENGTH:   1  MAX LENGTH:  40  DEFAULT LENGTH:  16  FUZZ: STD       ‚
     ‡ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ…ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ…ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‰
     ‚START           ‚END             ‚LABEL  (VER. V7|V8   14AUG2015:13:11:29)‚
     ‡ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒˆƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒˆƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‰
     ‚           20222‚           20283‚1-First 3 months                        ‚
     ‚           20284‚           20376‚2-Middle                                ‚
     ‚           20377‚           20438‚3-Last 3 months                         ‚
     ‚           20439‚           20479‚4-Wrap-up                               ‚
     ‚**OTHER**       ‚**OTHER**       ‚Out of range                            ‚
     Šƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‹ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒ‹ƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒƒŒ

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 17:13:59 GMT

So it looks like my min and max dates are LESS than the very first format category despite my coding...

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 17:15:42 GMT

I AM SO STUPID. Last year was 2014. Not 2015. ::HEADDESK::

I feel like such a goober.

Thank you all for your assistance!

Re: Date Range Format using PROC FORMAT

ballardw — Fri, 14 Aug 2015 17:16:29 GMT

The fact that the OTHER was working indicated that the FMTSEARCH wasn't an issue, but I didn't see that until after completing the previous post.

It starts to look like the actual data may be the issue. Again, MAXIMUM value of the date variable is???

Re: Date Range Format using PROC FORMAT

PhilC — Fri, 14 Aug 2015 17:18:56 GMT

Happens to the best of us. Make sure to give us our points and we won't say a word.

Re: Date Range Format using PROC FORMAT

bailunrui — Fri, 14 Aug 2015 17:19:46 GMT

Points given!