topic Re: Fit radar plots in one panel in Graphics Programming

Fit radar plots in one panel

palolix — Mon, 28 Sep 2026 22:56:24 GMT

Dear SAS Community,

Is there a way to fit all these 6 radar graphs I have in one panel, so that I end up with the first 3 radar graphs in one upper row, and the last 3 radar graphs in a lower row? The goal is to fit them in one figure. Please see below my code for each of the individual radar plots. I would greatly appreciate your help!!

data wide;

length DM_range $10;

length Variety $10;

input DM_range $ Variety $ a_texture b_texture c_texture d_texture e_texture f_texture g_texture;

if Variety='LB' then Variety='I49L';

if Variety='Junior' then Variety='I54J';

if Variety='Bumpy' then Variety='I55B';

if Variety='EG' then Variety='I12E';

datalines;

<15 LB 50.00 50.00 66.67 0.00 0.00 50.00 0.00

<15 Bumpy 17.07 31.71 34.15 7.32 0.00 82.93 0.00

<15 BL516 0.00 50.00 25.00 0.00 25.00 50.00 0.00

<15 Hass 0.00 0.00 0.00 0.00 0.00 0.00 0.00

<15 Junior 0.00 0.00 0.00 0.00 0.00 0.00 0.00

<15 GEM 0.00 0.00 0.00 0.00 0.00 0.00 0.00

<15 EG 0.00 0.00 0.00 0.00 0.00 0.00 0.00

15_20 LB 31.52 23.91 33.70 19.57 9.78 51.09 2.17

15_20 Bumpy 18.09 15.96 38.30 8.51 2.13 81.91 1.06

15_20 BL516 10.71 30.36 12.50 23.21 1.79 75.00 5.36

15_20 Hass 43.15 24.32 44.52 6.16 5.48 44.18 2.05

15_20 Junior 0.00 0.00 0.00 0.00 0.00 0.00 0.00

15_20 GEM 19.05 33.33 28.57 9.52 0.00 85.71 4.76

15_20 EG 50.68 23.29 52.05 4.11 1.37 50.68 0.00

20_25 LB 24.73 19.35 40.86 12.90 5.38 48.39 5.38

20_25 Bumpy 32.35 24.71 37.06 7.06 4.71 52.35 2.35

20_25 BL516 26.42 24.53 29.25 2.83 0.94 69.81 3.77

20_25 Hass 47.31 21.51 45.52 6.81 6.81 30.11 3.58

20_25 Junior 49.30 32.39 43.66 16.90 5.63 30.99 1.41

20_25 GEM 20.00 28.00 20.00 6.67 0.00 84.00 0.00

20_25 EG 72.56 31.10 60.98 3.66 1.83 22.56 2.44

25_30 LB 48.33 13.33 51.67 23.33 3.33 26.67 3.33

25_30 Bumpy 25.00 19.44 47.22 0.00 8.33 58.33 2.78

25_30 BL516 34.15 22.93 42.93 7.32 2.44 44.88 3.41

25_30 Hass 61.84 21.71 55.92 6.14 7.68 11.40 2.63

25_30 Junior 60.56 28.33 40.56 5.56 6.11 26.11 2.78

25_30 GEM 59.38 18.75 53.13 0.00 6.25 31.25 6.25

25_30 EG 75.47 26.42 60.38 5.66 3.77 16.98 1.89

30_35 LB 65.22 15.22 63.04 8.70 6.52 14.13 1.09

30_35 Bumpy 0.00 0.00 0.00 0.00 0.00 0.00 0.00

30_35 BL516 54.96 21.37 55.73 1.53 7.63 30.53 3.05

30_35 Hass 66.84 16.84 67.89 2.63 11.05 5.79 2.11

30_35 Junior 58.87 32.62 50.35 10.64 9.93 9.93 0.71

30_35 GEM 60.95 27.62 53.33 6.67 3.81 28.57 2.86

30_35 EG 0.00 0.00 0.00 0.00 0.00 0.00 0.00

>35 LB 0.00 0.00 0.00 0.00 0.00 0.00 0.00

>35 Bumpy 0.00 0.00 0.00 0.00 0.00 0.00 0.00

>35 BL516 0.00 0.00 0.00 0.00 0.00 0.00 0.00

>35 Hass 0.00 33.33 33.33 0.00 33.33 0.00 0.00

>35 Junior 69.62 24.05 58.23 6.33 12.66 3.80 1.27

>35 GEM 51.22 26.83 60.98 9.76 9.76 24.39 0.00

>35 EG 0.00 0.00 0.00 0.00 0.00 0.00 0.00

;

run;

proc sort data=wide out=long;

by DM_range Variety ;

run;

/* Transpose texture */

proc transpose data=long name=texture_label out=long1(rename=(COL1 = texture_value) );

by DM_range Variety ;

var a_texture b_texture c_texture d_texture e_texture f_texture g_texture;

run;

PROC PRINT DATA=long1 ;

RUN ;

/*rename levels if variable texture*/

data longnew;

set long1;

if texture_label = 'a_texture' then texture_label = 'Creamy';

else if texture_label = 'b_texture' then texture_label = 'Mushy';

else if texture_label = 'c_texture' then texture_label = 'Smooth';

else if texture_label = 'd_texture' then texture_label = 'Stringy';

else if texture_label = 'e_texture' then texture_label = 'Dry';

else if texture_label = 'f_texture' then texture_label = 'Watery';

else if texture_label = 'g_texture' then texture_label = 'None';

run;

PROC PRINT DATA=longnew ;

RUN ;

goptions reset=all cback=white border htitle=12pt htext=12pt;

goptions ctext=gray20;

axis1 color=grayde order=(0 to 100 by 25) ;

title1 j=c h=13pt 'Comparison of texture among varieties at DM <15 (relative %)';

proc gradar data=longnew;

where DM_range = '<15' and Variety in ('I49L', 'I55B');

chart texture_label / freq=texture_value ORDERACROSS=FORMATTED

overlay=Variety NOLEGEND

staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)

spiderweb

noframe

starcircles=(25 50)

cstarcircles=black

cstars=(aqua fuchsia blue)

wstars=(2 2 2)

lstar=(1 1 1)

cframe=white

;

run;

quit;

goptions reset=all cback=white border htitle=12pt htext=12pt;

goptions ctext=gray20;

axis1 color=grayde order=(0 to 100 by 25) ;

title1 j=c h=13pt 'Comparison of texture among varieties at DM 15-20 (relative %)';

proc gradar data=longnew;

where DM_range = '15_20';

chart texture_label / freq=texture_value ORDERACROSS=FORMATTED

overlay=Variety NOLEGEND

staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)

spiderweb

noframe

starcircles=(25 50)

cstarcircles=black

cstars=(aqua orange red green fuchsia blue)

wstars=(2 2 2 2 2 2 )

lstar=(1 1 1 1 1 1)

cframe=white

;

run;

quit;

goptions reset=all cback=white border htitle=12pt htext=12pt;

goptions ctext=gray20;

axis1 color=grayde order=(0 to 100 by 25) ;

title1 j=c h=13pt 'Comparison of texture among varieties at DM 20-25 (relative %)';

proc gradar data=longnew;

where DM_range = '20_25';

chart texture_label / freq=texture_value ORDERACROSS=FORMATTED

overlay=Variety NOLEGEND

staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)

spiderweb

noframe

starcircles=(25 50)

cstarcircles=black

cstars=(aqua orange red green fuchsia lime blue)

wstars=(2 2 2 2 2 2 2)

lstar=(1 1 1 1 1 1 1)

cframe=white

;

run;

quit;

goptions reset=all cback=white border htitle=12pt htext=12pt;

goptions ctext=gray20;

axis1 color=grayde order=(0 to 100 by 25);

title1 j=c h=13pt 'Comparison of texture among varieties at DM 25-30 (relative %)';

proc gradar data=longnew;

where DM_range = '25_30';

chart texture_label / freq=texture_value ORDERACROSS=FORMATTED

overlay=Variety NOLEGEND

staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)

spiderweb

noframe

starcircles=(25 50)

cstarcircles=black

cstars=(aqua orange red green fuchsia lime blue)

wstars=(2 2 2 2 2 2 2)

lstar=(1 1 1 1 1 1 1)

cframe=white

;

run;

quit;

goptions reset=all cback=white border htitle=12pt htext=12pt;

goptions ctext=gray20;

axis1 color=grayde order=(0 to 100 by 25) ;

title1 j=c h=13pt 'Comparison of texture among varieties at DM 30-35 (relative %)';

proc gradar data=longnew;

where DM_range = '30_35';

chart texture_label / freq=texture_value ORDERACROSS=FORMATTED

overlay=Variety NOLEGEND

staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)

spiderweb

noframe

starcircles=(25 50)

cstarcircles=black

cstars=(aqua orange red fuchsia lime)

wstars=(2 2 2 2 2)

lstar=(1 1 1 1 1)

cframe=white

;

run;

quit;

goptions reset=all cback=white border htitle=12pt htext=12pt;

goptions ctext=gray20;

axis1 color=grayde order=(0 to 100 by 25) ;

title1 j=c h=13pt 'Comparison of texture among varieties at DM >35 (relative %)';

proc gradar data=longnew;

where DM_range = '>35';

chart texture_label / freq=texture_value ORDERACROSS=FORMATTED

overlay=Variety NOLEGEND

staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)

spiderweb

noframe

starcircles=(25 50)

cstarcircles=black

cstars=(orange red lime )

wstars=(2 2 2)

lstar=(1 1 1)

cframe=white

;

run;

quit;

Re: Fit radar plots in one panel

Ksharp — Tue, 29 Sep 2026 05:59:27 GMT

You could try to use PROC SGPANEL.
https://blogs.sas.com/content/graphicallyspeaking/2013/11/27/is-there-a-car-on-your-radar/

Or ODS LAYOUT.
https://blogs.sas.com/content/graphicallyspeaking/2022/09/10/complex-layouts-using-the-sg-procedures/
https://blogs.sas.com/content/iml/2022/07/13/ods-graphs-panel.html
https://blogs.sas.com/content/sasdummy/2015/11/23/ods-statement-options-to-change/

If you also could allow RTF/PDF file, check my replay above.

Re: Fit radar plots in one panel

MarciaS — Tue, 29 Sep 2026 19:37:45 GMT

In addition to the suggestions already made, you could use the GREPLAY procedure to combine the radar charts into one page using PROC GREPLAY.

Below is a modification of your sample code that uses PROC GREPLAY to create a plot with two rows and 3 columns.

Note that I separated the title text into a TITLE1 and TITLE2 statement for readability in a smaller panel.

You can also find more information about combining plots in the following blog: https://blogs.sas.com/content/sgf/2016/09/16/do-you-need-multiple-graphs-on-a-page-we-have-got-you-covered/

Hope that helps.
Marcia

data wide;
length DM_range $10;
length Variety $10;
input  DM_range $ Variety $ a_texture b_texture c_texture d_texture e_texture f_texture g_texture;
 
  if Variety='LB' then Variety='I49L';
  if Variety='Junior' then Variety='I54J';
  if Variety='Bumpy' then Variety='I55B';
  if Variety='EG' then Variety='I12E';
 
datalines;
<15   LB     50.00 50.00 66.67 0.00 0.00 50.00 0.00
<15   Bumpy  17.07 31.71 34.15 7.32 0.00 82.93 0.00
<15   BL516  0.00 50.00 25.00 0.00 25.00 50.00 0.00
<15   Hass   0.00 0.00 0.00 0.00 0.00 0.00 0.00
<15   Junior 0.00 0.00 0.00 0.00 0.00 0.00 0.00  
<15   GEM    0.00 0.00 0.00 0.00 0.00 0.00 0.00
<15   EG     0.00 0.00 0.00 0.00 0.00 0.00 0.00
15_20 LB     31.52 23.91 33.70 19.57 9.78 51.09 2.17
15_20 Bumpy  18.09 15.96 38.30 8.51 2.13 81.91 1.06
15_20 BL516 10.71 30.36 12.50 23.21 1.79 75.00 5.36
15_20 Hass 43.15 24.32 44.52 6.16 5.48 44.18 2.05
15_20 Junior 0.00 0.00 0.00 0.00 0.00 0.00 0.00
15_20 GEM    19.05 33.33 28.57 9.52 0.00 85.71 4.76
15_20 EG     50.68 23.29 52.05 4.11 1.37 50.68 0.00
20_25 LB     24.73 19.35 40.86 12.90 5.38 48.39 5.38
20_25 Bumpy  32.35 24.71 37.06 7.06 4.71 52.35 2.35
20_25 BL516  26.42 24.53 29.25 2.83 0.94 69.81 3.77
20_25 Hass   47.31 21.51 45.52 6.81 6.81 30.11 3.58 
20_25 Junior 49.30 32.39 43.66 16.90 5.63 30.99 1.41
20_25 GEM    20.00 28.00 20.00 6.67 0.00 84.00 0.00
20_25 EG     72.56 31.10 60.98 3.66 1.83 22.56 2.44
25_30 LB     48.33 13.33 51.67 23.33 3.33 26.67 3.33
25_30 Bumpy  25.00 19.44 47.22 0.00 8.33 58.33 2.78
25_30 BL516  34.15 22.93 42.93 7.32 2.44 44.88 3.41
25_30 Hass   61.84 21.71 55.92 6.14 7.68 11.40 2.63 
25_30 Junior 60.56 28.33 40.56 5.56 6.11 26.11 2.78
25_30 GEM    59.38 18.75 53.13 0.00 6.25 31.25 6.25
25_30 EG     75.47 26.42 60.38 5.66 3.77 16.98 1.89
30_35 LB     65.22 15.22 63.04 8.70 6.52 14.13 1.09
30_35 Bumpy  0.00 0.00 0.00 0.00 0.00 0.00 0.00
30_35 BL516  54.96 21.37 55.73 1.53 7.63 30.53 3.05
30_35 Hass   66.84 16.84 67.89 2.63 11.05 5.79 2.11  
30_35 Junior 58.87 32.62 50.35 10.64 9.93 9.93 0.71
30_35 GEM    60.95 27.62 53.33 6.67 3.81 28.57 2.86
30_35 EG     0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   LB     0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   Bumpy  0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   BL516 0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   Hass   0.00 33.33 33.33 0.00 33.33 0.00 0.00 
>35   Junior 69.62 24.05 58.23 6.33 12.66 3.80 1.27
>35   GEM    51.22 26.83 60.98 9.76 9.76 24.39 0.00
>35   EG     0.00 0.00 0.00 0.00 0.00 0.00 0.00
;
run;
 
proc sort data=wide out=long;
    by DM_range Variety ;
run;
 
/* Transpose texture */
proc transpose data=long name=texture_label out=long1(rename=(COL1 = texture_value) );
    by DM_range Variety ;
    var a_texture b_texture c_texture d_texture e_texture f_texture g_texture;
run;  
 
  PROC PRINT DATA=long1 ;
RUN ;
 
 
 
/*rename levels if variable texture*/
data longnew;
    set long1;
    if texture_label = 'a_texture' then texture_label = 'Creamy';
    else if texture_label = 'b_texture' then texture_label = 'Mushy';
else if texture_label = 'c_texture' then texture_label = 'Smooth';
else if texture_label = 'd_texture' then texture_label = 'Stringy';
else if texture_label = 'e_texture' then texture_label = 'Dry';
else if texture_label = 'f_texture' then texture_label = 'Watery';
else if texture_label = 'g_texture' then texture_label = 'None';
run;
 
PROC PRINT DATA=longnew ;
RUN ;
 
/* use this code to remove old grseg entries when running the code more than once 
proc greplay igout=work.gseg nofs;
  delete _all_;
run; quit;
*/




goptions reset=all cback=white border htext=12pt hsize=3in vsize=5in nodisplay;
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title h=12pt 'Comparison of texture among varieties';
title2 h=12pt 'at DM <15 (relative %)';
 proc gradar data=longnew;
where DM_range = '<15' and Variety in ('I49L', 'I55B');
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua fuchsia blue)
                 wstars=(2 2 2)
lstar=(1 1 1)
                 cframe=white 
                 ;
run;
quit;
 
 
goptions reset=all cback=white border  htext=12pt hsize=3in vsize=5in nodisplay;
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=12pt 'Comparison of texture among varieties';
title2 j=c h=12pt 'at DM 15-20 (relative %)';
 proc gradar data=longnew;
where DM_range = '15_20';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange red green fuchsia blue)
                 wstars=(2 2 2 2 2 2 )
lstar=(1 1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;
 
 
goptions reset=all cback=white border htext=12pt hsize=3in vsize=5in nodisplay;
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=12pt 'Comparison of texture among varieties';
title2 j=c h=12pt 'at DM 20-25 (relative %)';
proc gradar data=longnew;
where DM_range = '20_25';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange  red green fuchsia lime blue)
                 wstars=(2 2 2 2 2 2 2)
lstar=(1 1 1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;
 
 
goptions reset=all cback=white border htext=12pt hsize=3in vsize=5in nodisplay;
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25);  
title1 j=c h=12pt 'Comparison of texture among varieties';
title2 j=c h=12pt 'at DM 25-30 (relative %)';
 proc gradar data=longnew;
where DM_range = '25_30';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange  red green fuchsia lime blue)
                 wstars=(2 2 2 2 2 2 2)
lstar=(1 1 1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;
 
 
goptions reset=all cback=white border htext=12pt hsize=3in vsize=5in nodisplay;
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=12pt 'Comparison of texture among varieties';
title2 j=c h=12pt 'at DM 30-35 (relative %)';
 proc gradar data=longnew;
where DM_range = '30_35';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange  red fuchsia lime)
                 wstars=(2 2 2 2 2)
lstar=(1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;
 
goptions reset=all cback=white border htext=12pt hsize=3in vsize=5in nodisplay;
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=12pt 'Comparison of texture among varieties';
title2 j=c h=12pt 'at DM >35 (relative %)';
proc gradar data=longnew;
where DM_range = '>35';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(orange  red lime )
                 wstars=(2 2 2)
lstar=(1 1 1)
                 cframe=white
                 ;
run;
quit;
goptions reset=all;
proc greplay igout=work.gseg nofs tc=work.templt;
  tdef R2C3 
    1/llx=0 lly=50 ulx=0 uly=100 urx=33 ury=100 lrx=33 lry=50
	2/llx=33 lly=50 ulx=33 uly=100 urx=66 ury=100 lrx=66 lry=50
	3/llx=66 lly=50 ulx=66 uly=100 urx=99 ury=100 lrx=99 lry=50

	4/llx=0 lly=0 ulx=0 uly=50 urx=33 ury=50 lrx=33 lry=0
	5/llx=33 lly=0 ulx=33 uly=50 urx=66 ury=50 lrx=66 lry=0
	6/llx=66 lly=0 ulx=66 uly=50 urx=99 ury=50 lrx=99 lry=0
	;
  template R2C3;
  treplay 1:1 2:2 3:3
          4:4 5:5 6:6;
run;
quit;

Re: Fit radar plots in one panel

palolix — Tue, 29 Sep 2026 20:58:12 GMT

Thank you very much Ksharp, I will try to work with these options.

Re: Fit radar plots in one panel

palolix — Tue, 29 Sep 2026 21:31:54 GMT

Thank you so much for helping me with this Marcia! I tried the code and got all the graphs in one panel. I noticed however that the attributes (creamy, watery, etc) in the axis are almost impossible to see. Is there a way to make them bigger like in the second picture? I tried increasing the number in htext=18pt but it didn't work.

Re: Fit radar plots in one panel

Ksharp — Wed, 30 Sep 2026 05:20:58 GMT

data wide;
length DM_range $10;
length Variety $10;
input  DM_range $ Variety $ a_texture b_texture c_texture d_texture e_texture f_texture g_texture;
 
  if Variety='LB' then Variety='I49L';
  if Variety='Junior' then Variety='I54J';
  if Variety='Bumpy' then Variety='I55B';
  if Variety='EG' then Variety='I12E';
 
datalines;
<15   LB     50.00 50.00 66.67 0.00 0.00 50.00 0.00
<15   Bumpy  17.07 31.71 34.15 7.32 0.00 82.93 0.00
<15   BL516  0.00 50.00 25.00 0.00 25.00 50.00 0.00
<15   Hass   0.00 0.00 0.00 0.00 0.00 0.00 0.00
<15   Junior 0.00 0.00 0.00 0.00 0.00 0.00 0.00  
<15   GEM    0.00 0.00 0.00 0.00 0.00 0.00 0.00
<15   EG     0.00 0.00 0.00 0.00 0.00 0.00 0.00
15_20 LB     31.52 23.91 33.70 19.57 9.78 51.09 2.17
15_20 Bumpy  18.09 15.96 38.30 8.51 2.13 81.91 1.06
15_20 BL516 10.71 30.36 12.50 23.21 1.79 75.00 5.36
15_20 Hass 43.15 24.32 44.52 6.16 5.48 44.18 2.05
15_20 Junior 0.00 0.00 0.00 0.00 0.00 0.00 0.00
15_20 GEM    19.05 33.33 28.57 9.52 0.00 85.71 4.76
15_20 EG     50.68 23.29 52.05 4.11 1.37 50.68 0.00
20_25 LB     24.73 19.35 40.86 12.90 5.38 48.39 5.38
20_25 Bumpy  32.35 24.71 37.06 7.06 4.71 52.35 2.35
20_25 BL516  26.42 24.53 29.25 2.83 0.94 69.81 3.77
20_25 Hass   47.31 21.51 45.52 6.81 6.81 30.11 3.58 
20_25 Junior 49.30 32.39 43.66 16.90 5.63 30.99 1.41
20_25 GEM    20.00 28.00 20.00 6.67 0.00 84.00 0.00
20_25 EG     72.56 31.10 60.98 3.66 1.83 22.56 2.44
25_30 LB     48.33 13.33 51.67 23.33 3.33 26.67 3.33
25_30 Bumpy  25.00 19.44 47.22 0.00 8.33 58.33 2.78
25_30 BL516  34.15 22.93 42.93 7.32 2.44 44.88 3.41
25_30 Hass   61.84 21.71 55.92 6.14 7.68 11.40 2.63 
25_30 Junior 60.56 28.33 40.56 5.56 6.11 26.11 2.78
25_30 GEM    59.38 18.75 53.13 0.00 6.25 31.25 6.25
25_30 EG     75.47 26.42 60.38 5.66 3.77 16.98 1.89
30_35 LB     65.22 15.22 63.04 8.70 6.52 14.13 1.09
30_35 Bumpy  0.00 0.00 0.00 0.00 0.00 0.00 0.00
30_35 BL516  54.96 21.37 55.73 1.53 7.63 30.53 3.05
30_35 Hass   66.84 16.84 67.89 2.63 11.05 5.79 2.11  
30_35 Junior 58.87 32.62 50.35 10.64 9.93 9.93 0.71
30_35 GEM    60.95 27.62 53.33 6.67 3.81 28.57 2.86
30_35 EG     0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   LB     0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   Bumpy  0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   BL516 0.00 0.00 0.00 0.00 0.00 0.00 0.00
>35   Hass   0.00 33.33 33.33 0.00 33.33 0.00 0.00 
>35   Junior 69.62 24.05 58.23 6.33 12.66 3.80 1.27
>35   GEM    51.22 26.83 60.98 9.76 9.76 24.39 0.00
>35   EG     0.00 0.00 0.00 0.00 0.00 0.00 0.00
;
run;
 
proc sort data=wide out=long;
    by DM_range Variety ;
run;
 
/* Transpose texture */
proc transpose data=long name=texture_label out=long1(rename=(COL1 = texture_value) );
    by DM_range Variety ;
    var a_texture b_texture c_texture d_texture e_texture f_texture g_texture;
run;  
 

 
 
/*rename levels if variable texture*/
data longnew;
    set long1;
    if texture_label = 'a_texture' then texture_label = 'Creamy';
    else if texture_label = 'b_texture' then texture_label = 'Mushy';
else if texture_label = 'c_texture' then texture_label = 'Smooth';
else if texture_label = 'd_texture' then texture_label = 'Stringy';
else if texture_label = 'e_texture' then texture_label = 'Dry';
else if texture_label = 'f_texture' then texture_label = 'Watery';
else if texture_label = 'g_texture' then texture_label = 'None';
run;
 


 options nodate nonumber;
options leftmargin="0.001in" rightmargin="0.001in" topmargin="0.001in" bottommargin="0.001in";
options papersize=(10.0in 7.0in);
ods printer printer=png300 file="c:\temp\dashboard.png" style=normalprinter;
ods layout gridded columns=3  advance=proc
    column_gutter=0.1in row_gutter=0.1in;




goptions reset=all cback=white border htitle=8pt htext=8pt vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=8pt 'Comparison of texture among varieties at DM <15 (relative %)';
 proc gradar data=longnew;
where DM_range = '<15' and Variety in ('I49L', 'I55B');
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua fuchsia blue)
                 wstars=(2 2 2)
lstar=(1 1 1)
                 cframe=white
                 ;
run;
quit;


goptions reset=all cback=white border htitle=8pt htext=8pt  vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=8pt 'Comparison of texture among varieties at DM 15-20 (relative %)';
 proc gradar data=longnew;
where DM_range = '15_20';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange red green fuchsia blue)
                 wstars=(2 2 2 2 2 2 )
lstar=(1 1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;

 
goptions reset=all cback=white border htitle=8pt htext=8pt  vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=8pt 'Comparison of texture among varieties at DM 20-25 (relative %)';
proc gradar data=longnew;
where DM_range = '20_25';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange  red green fuchsia lime blue)
                 wstars=(2 2 2 2 2 2 2)
lstar=(1 1 1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;

 

goptions reset=all cback=white border htitle=8pt htext=8pt  vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25);  
title1 j=c h=8pt 'Comparison of texture among varieties at DM 25-30 (relative %)';
 proc gradar data=longnew;
where DM_range = '25_30';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange  red green fuchsia lime blue)
                 wstars=(2 2 2 2 2 2 2)
lstar=(1 1 1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;

 
goptions reset=all cback=white border htitle=8pt htext=8pt  vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=8pt 'Comparison of texture among varieties at DM 30-35 (relative %)';
 proc gradar data=longnew;
where DM_range = '30_35';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(aqua orange  red fuchsia lime)
                 wstars=(2 2 2 2 2)
lstar=(1 1 1 1 1)
                 cframe=white
                 ;
run;
quit;

 
goptions reset=all cback=white border htitle=8pt htext=8pt  vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=8pt 'Comparison of texture among varieties at DM >35 (relative %)';
proc gradar data=longnew;
where DM_range = '>35';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(orange  red lime )
                 wstars=(2 2 2)
lstar=(1 1 1)
                 cframe=white
                 ;
run;
quit;





ods layout end;
ods printer close;

Re: Fit radar plots in one panel

palolix — Wed, 30 Sep 2026 17:52:14 GMT

Thank you so much Ksharp, this is great! I noticed that in some of the plots the attributes (Creamy, watery, etc) look bigger than in other plots (they look smaller in the last plot), which I don't understand because the code is the same for all the plots. Also the attribute 'Creamy' seems to be closer to the axis in some of the plots. Is there a way to fix this?

Thank you so much!

Re: Fit radar plots in one panel

Ksharp — Thu, 01 Oct 2026 06:18:23 GMT

You could use HEIGHT= and INHEIGHT to control the font size of label and spoke label.

For more options, check doc:

https://documentation.sas.com/api/docsets/graphref/9.4/content/graphref.pdf?locale=en

goptions reset=all cback=white border htitle=8pt htext=8pt  vsize=3in hsize=3in ; 
goptions ctext=gray20;
axis1 color=grayde order=(0 to 100 by 25) ;  
title1 j=c h=8pt 'Comparison of texture among varieties at DM >35 (relative %)';
proc gradar data=longnew;
where DM_range = '>35';
   chart texture_label / freq=texture_value ORDERACROSS=FORMATTED
                 overlay=Variety NOLEGEND
staraxis=(axis1 axis1 axis1 axis1 axis1 axis1 axis1)
spiderweb
noframe
                 starcircles=(25 50)
                 cstarcircles=black
                 cstars=(orange  red lime )
                 wstars=(2 2 2)
lstar=(1 1 1)
                 cframe=white
				 height=6
				 inheight=8
                 ;
run;
quit;

P.S. If I were you, I would like to use PROC SGPANEL to get this graph .

I am not familiar with SAS/GRAPH module, maybe @GraphGuy (a.k.a Robert.Allision) would give you better solution.

Re: Fit radar plots in one panel

palolix — Thu, 01 Oct 2026 22:46:18 GMT

Thank you very much Ksharp! I tried your last suggestion but for some reason I'm still getting very different sizes in the attributes. In some plot they look really big, while in others super small, even when I'm using the same height. The strange thing is that is just the first and the last plot that look different (spiderweb bigger and attributes smaller). Probably because they only have two lines. You are right, I rather tried with proc sgpanel.

Thanks a lot!