topic Re: PROC REPORT removing random values from ORDER variable in ODS and Base Reporting

PROC REPORT removing random values from ORDER variable

MFLoGrasso — Wed, 22 Jul 2015 19:19:31 GMT

So, I have a simple table that I would like to present using the following code:

proc report nowd data=wt_anly_cmp;
  column Campus cohort coh_pct Withdrawals wd_rate sig pct_ratio excess wd_Rate_py Pct_Ratio_py;
  define sig /left;
  define excess /order order=internal descending;
  define wd_rate /style(column)={backgroundcolor=verylightgray};
  run;

Unfortunately, when I run the report, some values in the sorted column disappear (EXCESS in line 04). Note that the observations are in the correct sort order that the values not gone missing. I have tried changing the ORDER variable, and it repeats itself, seemingly randomly removing values from the new ORDER variable after properly sorting the observations. I tried applying a format in the DEFINE statement to no avail, and changing the ORDER variable moves the removed values to different rows, so I really don't know what is causing the problem.

Re: PROC REPORT removing random values from ORDER variable

ballardw — Wed, 22 Jul 2015 20:14:37 GMT

Some input data, the results you are getting and the desired results would be helpful. Also, are there any warnings or notes about that variable in the log?

Re: PROC REPORT removing random values from ORDER variable

MFLoGrasso — Wed, 22 Jul 2015 21:03:49 GMT

No warnings or notes. Here is my data (campus information removed).

Campus	TERM_CODE	_TYPE_	_PAGE_	_TABLE_	Cohort	CPct	Withdrawals	wd_Rate	Pct_Ratio	Excess	wd_Rate_py	Pct_Ratio_py	coh_pct	z	pval	sig
A	201530	11	1	1	162	2.067909114	17	10.49%	0.77	-5	17.97%	0.91	2.07%	-1.202384487	0.229214597
B	201530	11	1	1	291	3.714577483	48	16.49%	1.20	8	17.54%	0.89	3.71%	1.407764708	0.159200754
C	201530	11	1	1	268	3.420985448	24	8.96%	0.65	-13	11.20%	0.57	3.42%	-2.302439201	0.021310416	*
D	201530	11	1	1	350	4.467704876	54	15.43%	1.13	6	23.80%	1.20	4.47%	0.956622055	0.338758053
E	201530	11	1	1	427	5.450599949	49	11.48%	0.84	-10	23.05%	1.16	5.45%	-1.380257352	0.167507421
F	201530	11	1	1	334	4.263466939	66	19.76%	1.44	20	27.51%	1.39	4.26%	3.285809914	0.001016896	**
G	201530	11	1	1	328	4.186877713	37	11.28%	0.82	-8	13.21%	0.67	4.19%	-1.306560091	0.191362158
H	201530	11	1	1	284	3.625223385	46	16.20%	1.18	7	22.68%	1.15	3.63%	1.24153184	0.214409343
I	201530	11	1	1	436	5.565483789	58	13.30%	0.97	-2	20.09%	1.01	5.57%	-0.254069736	0.799441683
J	201530	11	1	1	314	4.008169517	48	15.29%	1.12	5	21.32%	1.08	4.01%	0.829281128	0.406945347
K	201530	11	1	1	468	5.973959663	132	28.21%	2.06	68	34.68%	1.75	5.97%	9.401931993	5.35702E-21	***
L	201530	11	1	1	302	3.854991065	13	4.30%	0.31	-28	12.46%	0.63	3.85%	-4.845869048	1.26059E-06	***
M	201530	11	1	1	1,321	16.86239469	263	19.91%	1.45	82	22.19%	1.12	16.86%	7.184604394	6.74021E-13	***
N	201530	11	1	1	398	5.080418688	42	10.55%	0.77	-13	14.79%	0.75	5.08%	-1.87922317	0.060214027
O	201530	11	1	1	436	5.565483789	41	9.40%	0.69	-19	15.15%	0.77	5.57%	-2.68975212	0.007150511	**
P	201530	11	1	1	26	0.331886648	3	11.54%	0.84	-1	16.00%	0.81	0.33%	-0.322367117	0.747174592
Q	201530	11	1	1	377	4.812356395	26	6.90%	0.50	-26	16.84%	0.85	4.81%	-3.941794892	8.08741E-05	***
R	201530	11	1	1	303	3.867755936	37	12.21%	0.89	-5	29.31%	1.48	3.87%	-0.77330628	0.43934114
S	201530	11	1	1	454	5.795251468	42	9.25%	0.67	-20	14.52%	0.73	5.80%	-2.845430717	0.004435141	**
T	201530	11	1	1	555	7.084503447	28	5.05%	0.37	-48	9.69%	0.49	7.08%	-6.156339973	7.44453E-10	***

And the result I'm seeing. No warnings or notes in the log. Note the blanks in the Excess column for campuses R and N, highlighted in red below. I did just notice that the formatted values for these entries are exactly the same as the line before it (-5 and -13, respectively). On a whim, I just tried adding the SHOWALL option to the PROC line with no effect, unfortunately.

Campus	Cohort	Percent of Cohort	Withdrawals	Withdrawal Rate	Signif	Percent Ratio	Excess	Prior Year Withdrawal Rate	Prior Year Percent Ratio
M	1,321	16.86%	263	19.91%	***	1.45	82	22.19%	1.12
K	468	5.97%	132	28.21%	***	2.06	68	34.68%	1.75
F	334	4.26%	66	19.76%	**	1.44	20	27.51%	1.39
B	291	3.71%	48	16.49%		1.20	8	17.54%	0.89
H	284	3.63%	46	16.20%		1.18	7	22.68%	1.15
D	350	4.47%	54	15.43%		1.13	6	23.80%	1.20
J	314	4.01%	48	15.29%		1.12	5	21.32%	1.08
P	26	0.33%	3	11.54%		0.84	-1	16.00%	0.81
I	436	5.57%	58	13.30%		0.97	-2	20.09%	1.01
A	162	2.07%	17	10.49%		0.77	-5	17.97%	0.91
R	303	3.87%	37	12.21%		0.89		29.31%	1.48
G	328	4.19%	37	11.28%		0.82	-8	13.21%	0.67
E	427	5.45%	49	11.48%		0.84	-10	23.05%	1.16
C	268	3.42%	24	8.96%	*	0.65	-13	11.20%	0.57
N	398	5.08%	42	10.55%		0.77		14.79%	0.75
O	436	5.57%	41	9.40%	**	0.69	-19	15.15%	0.77
S	454	5.80%	42	9.25%	**	0.67	-20	14.52%	0.73
Q	377	4.81%	26	6.90%	***	0.50	-26	16.84%	0.85
L	302	3.85%	13	4.30%	***	0.31	-28	12.46%	0.63
T	555	7.08%	28	5.05%	***	0.37	-48	9.69%	0.49

Re: PROC REPORT removing random values from ORDER variable

Cynthia_sas — Thu, 23 Jul 2015 00:09:53 GMT

Hi:

If you define EXCESS as an ORDER, then the repetitious display of values will be suppressed. For example, this code:

data class;

set sashelp.class;

** make some people the same height;

if name in ('Barbara', 'Judy', 'Carol','Henry', 'Jeffrey')

then height = 67.5;

run;

proc report data=class nowd;

title '1) Default Behavior';

column sex height weight name;

define sex / order;

define height / order descending;

define weight / display;

define name / display;

run;

proc report data=class nowd;

title '2) Changed Behavior using a COMPUTEd item';

column sex height showht weight name;

define sex / order;

define height / order descending;

define showht / computed;

define weight / display;

define name / display;

compute showht;

if height ne . then do;

holdit = height;

showht = height;

end;

else if height = . then showht=holdit;

endcomp;

run;

Produces these results:

Default:

Using Compute Block:

Re: PROC REPORT removing random values from ORDER variable

Tom — Thu, 23 Jul 2015 01:12:00 GMT

That is what ORDER is DESIGNED to do.

proc report data=sashelp.class;

where age < 13 ;

column age name ;

define age / order ;

run;

Age Name

11 Joyce

Thomas

12 James

Jane

John

Louise

Robert

Why not just use PROC SORT to set the data in right order?

Re: PROC REPORT removing random values from ORDER variable

MFLoGrasso — Thu, 23 Jul 2015 03:46:28 GMT

Cynthia,

I'll have to try that when I'm back at my desk in the morning.

Marc

Re: PROC REPORT removing random values from ORDER variable

MFLoGrasso — Thu, 23 Jul 2015 03:50:35 GMT

Tom,

Unfortunately, I have many tables with the same issue, as I am actually analyzing one variable in many different ways, and I was looking for a way to streamline my code as opposed to a series of PROC SORTs.

Marc

Re: PROC REPORT removing random values from ORDER variable

Cynthia_sas — Thu, 23 Jul 2015 03:53:28 GMT

Hi:

My code example shows how to work around the issue of using EXCESS as an ORDER item on the report. I posted the code and screen shots. I think you want the second example.

cynthia

Re: PROC REPORT removing random values from ORDER variable

MFLoGrasso — Thu, 23 Jul 2015 14:07:07 GMT

That's what i went for, and it worked like a charm. THANKS!