topic Re: File storm_summary.sas7bdat not found in Programming 1 and 2

File storm_summary.sas7bdat not found

brunolaspada — Wed, 24 Oct 2018 13:23:50 GMT

Hi, i am following the sas programming 1 with sas studio interface. At lesson 2, first activity, is required to open the storm summary table from the data folder. Unfortunately I can not find this file in the data folder. I just noticed there is a excel file in the data folder called storm and including the same information, but is not the file required by the excercise and so i can not follow the exercise steps.

Re: File storm_summary.sas7bdat not found

Reeza — Wed, 24 Oct 2018 13:32:02 GMT

Did you run the programs to create thee SAS data sets? if so, the files are in the folder just above Data (EPG194) or in the PG1 library I believe.

Re: File storm_summary.sas7bdat not found

brunolaspada — Wed, 24 Oct 2018 13:45:37 GMT

thanks for replying reeza.

I can not find the file in the folder neither in the libriary so i think i have not excecuted the program. could u link the instructions?

Re: File storm_summary.sas7bdat not found

Panagiotis — Wed, 24 Oct 2018 13:46:25 GMT

Can you select libraries on the navigation pane on the left side and see if there is a library called PG1. I will look like this:

If you see it the table will be inside the library. Let us know if you do.

- Peter

Re: File storm_summary.sas7bdat not found

brunolaspada — Wed, 24 Oct 2018 13:51:54 GMT

thanks for replying Peter,

In the libraries section i can only see this folder.

Re: File storm_summary.sas7bdat not found

Panagiotis — Wed, 24 Oct 2018 13:52:02 GMT

On the e-learning it should be the first part where it says Course Overview and Data Setup (Required). Here is a link, it should get you there.

There are also some videos that can help you during the setup. Here is the link for those: Videos. Make sure to watch the video for your specific setup.

- Peter

Re: File storm_summary.sas7bdat not found

brunolaspada — Wed, 24 Oct 2018 14:02:58 GMT

I solved the issue.

I had to complete the procedures for programming.

thanks all

Re: File storm_summary.sas7bdat not found

leilak — Tue, 30 Oct 2018 03:21:20 GMT

I have the same problem. How did you come up with solution? I cannot find the storm file.

Re: File storm_summary.sas7bdat not found

brunolaspada — Tue, 30 Oct 2018 07:07:32 GMT

Hi leilak,

you need to run the two sas programs to create the data set. Here is the link https://vle.sas.com/mod/scorm/player.php?scoid=8085&cm=52062&currentorg=ORG-EPG194 including both the instructions you need to follow according the sas interface you are using. it refers to the first lesson of the sas programming 1 course and is a required step to continue the course.

let me know if you solve the issue

Re: File storm_summary.sas7bdat not found

Panagiotis — Tue, 30 Oct 2018 12:29:07 GMT

Check the verified solution in the post. There is a link to the instructions on how to create the data for the course and a video on how to do it as well.

Let us know if it works for you.

- Peter

Re: File storm_summary.sas7bdat not found

leilak — Wed, 31 Oct 2018 08:33:26 GMT

thank you. I found it

Re: File storm_summary.sas7bdat not found

leilak — Wed, 31 Oct 2018 08:34:03 GMT

Thank you. I found it

Re: File storm_summary.sas7bdat not found

Emily123 — Sun, 13 Jan 2019 18:18:44 GMT

Hi I came across the same issue, but my situation is a little different. I am using SAS OnDemand for Academics. I am pretty sure I set up the data sets correctly because I am able to find PG1 library and the exact table under the PG1 library. I am able to perform other tasks. To double check, I went through the video, and I did exact the same thing as shown in the video. However, when I ran the code, it still says "file does not exist". I got some confused. Could you please help me?

71 proc contents data="EPG194/data/storm_summary.sas7bdat";

ERROR: File EPG194/data/storm_summary.sas7bdat does not exist.

Re: File storm_summary.sas7bdat not found

Reeza — Sun, 13 Jan 2019 18:51:46 GMT

That path looks incorrect for Academics on Demand. Use the Servers Files and Folders pane and find the file. Right click it and select properties. That will provide the path.

@Emily123 wrote:

Hi I came across the same issue, but my situation is a little different. I am using SAS OnDemand for Academics. I am pretty sure I set up the data sets correctly because I am able to find PG1 library and the exact table under the PG1 library. I am able to perform other tasks. To double check, I went through the video, and I did exact the same thing as shown in the video. However, when I ran the code, it still says "file does not exist". I got some confused. Could you please help me?

71 proc contents data="EPG194/data/storm_summary.sas7bdat";

ERROR: File EPG194/data/storm_summary.sas7bdat does not exist.

Re: File storm_summary.sas7bdat not found

farhouat — Mon, 14 Jan 2019 10:41:06 GMT

Did run the 2 programs: -1epg194 and 2epg194 and it is still not showing up. Not sure what procedure needs to be run.

Thanks

Re: File storm_summary.sas7bdat not found

Reeza — Mon, 14 Jan 2019 16:40:59 GMT

Show the log from running those programs?

Was there any errors or did it run correctly?

Re: File storm_summary.sas7bdat not found

farhouat — Mon, 14 Jan 2019 21:45:03 GMT

Thanks for your reply Reeza.

No, there were no errors, it did run correctly and I run it multiple times. Please take a look at attacchement.

Thanks a bunch

Re: File storm_summary.sas7bdat not found

Reeza — Mon, 14 Jan 2019 21:48:43 GMT

You're checking in the work location that the file is not there? Looks like you're using EG, so you followed the exact set up instructions for EG? If it persists you can contact SAS Tech Support.

Re: File storm_summary.sas7bdat not found

thosaargau1 — Tue, 12 Feb 2019 13:50:12 GMT

When you create pg1 with

libname pg1 "/folders/myfolders/EPG194/";

you will not find np_summary.

If you complete the path as follows:

libname pg1 "/folders/myfolders/EPG194/data";

it should work.

It solved the issue for me

Re: File storm_summary.sas7bdat not found

RobertRoutledge — Sun, 26 Jan 2020 16:12:39 GMT

Hi,

the file "storm_summary" does not exist in my data folder.

I'm using SAS University Edition and have followed all the steps in the Course setup. I get the following message when I run setup.sas:

NOTE: Libref PG1 was successfully assigned as follows:

Engine: V9

Physical Name: /folders/myfolders/EPG194/data

I have attached a screenshot so you can hopefully help me access storm_summary.